Search results

  1. forpit2000gt

    need som info in PINGING...PLEASE!

    detonation and spark knock the same...My family used to have one of those old ass station wagons, Fords glorious Grand Torino Station Wagon, 400M. Ohh, and the wood grain side panels.
  2. forpit2000gt

    Track times after 4.10s

    until you practice withthe 4.10s and get the 60 down, times won't change much. You can get 13.20s out of it :nice:
  3. forpit2000gt

    rearend problem

    can be done in the car.
  4. forpit2000gt

    Got a new engine and f***ed up 1 cylinder in 2 days...

    you don't have to go WOT to have detonation. You have a chip that may be adding timing, may be leaning out a little or not. You add intake parts that are known to lean it out. You drove it and burned valves. Maybe the shop is a little responsible for not saying something. I think you are...
  5. forpit2000gt

    spray it?

    zex dry is fine and if you have a window switch and only spray above 3000 rpm, you don't have puddling problems with a wet kit. The puddling is not really an issue with the dry kits. NX is wet.
  6. forpit2000gt

    Slight Knock At Start-Up

    by cycling the fuel pump on and off , you make sure to have plenty of fuel and fuel pressure at starting. sometimes a dirty fuel filter can cause this as well. I haven't heard spark knock at startup, if that is what you are even dealing with. If you have a chip or hand tuner , remove and test...
  7. forpit2000gt

    H Pipe Install

    where the two pieces connect together is where the clamp goes. do not tighten that up until all is fit together and tight with manifolds. tighten it up once in one position.
  8. forpit2000gt

    Slight Knock At Start-Up

    first off, the A/F guage should not be trusted for problems, it is little more than pretty lights. Are all the injector connections snug. If you turn the key on and off a couple of cycles before cranking will it do the same? Hot and cold starts? Did you change the fuel filter?
  9. forpit2000gt

    bolt size for 02 gt crank dampener

    I know this is not the answer, I will check later if someone doesn't let you know the size. Why don't you get a complete socket set instead of one or two pieces???
  10. forpit2000gt

    Stock air intake vs. K&N FIPK

    the tuner itself could do this.
  11. forpit2000gt

    Slight Knock At Start-Up

    why didn't you use the sensor from the 04? I haven't seen an 04 but don't think that would matter.
  12. forpit2000gt

    Stock air intake vs. K&N FIPK

    to many variables. A larger filter can increase the amount of air. What other mods done to car.
  13. forpit2000gt

    Stock air intake vs. K&N FIPK

    IMHO, I think a place like that can get you into trouble real quick. Find a dyno that someone knows what they are doing.
  14. forpit2000gt

    Got a new engine and f***ed up 1 cylinder in 2 days...

    list mods done to block and internals, heads? PI? cams? head work? plenum and intake parts? all bolt-ons and mods? chip, installed or not? old tune? If it burned valves and it did it before, you had a lean condition to begin with. The shop may or may not have had anything to do with that. give...
  15. forpit2000gt

    Help with Guages and cluster

    Lunar, Electrical Fuel pressure, part # 4163 Lunar, Boost/Vacume part # 4103 Lunar, Boost part number # 4104 all 2 1/16 :D
  16. forpit2000gt

    Where are the good 2V 4.6 manifolds?

    spend the money on cams and head work. Most of the aluminum intakes are still not going to give huge power gains , only an aluminum intake that can be ported. Still better for FI applications.
  17. forpit2000gt

    gotta fix this problem once and for all

    did you swap the sensors?
  18. forpit2000gt

    rearend problem

    Ford is fine, I prefer Moser or Strange. FRPP 31 spline diff. or Eaton 31 spline unit. If you broke an axle, I would also get a bearing kit for carrier and axles. Do you already have gears?
  19. forpit2000gt

    spray it?

    which kit, any extras?
  20. forpit2000gt

    H Pipe Install

    If you install it correctly, it will not leak. The one you have is fine.