Search results

  1. Zero Signal

    Newbie Build

    At least you don't have to redo the gasket and RTV.
  2. Zero Signal

    new short block on the way

    Not many people are running Holley heads here. If those heads have been worked over, they may have been decked. You can try the stock rod and see if it just happens to work. If not, pick up a checking rod.
  3. Zero Signal

    Build Thread "Rising from Ashes" 94 Cobra build thread

    Oooh, when can we start sending you our parts too? I need some valve covers done :D
  4. Zero Signal

    HELP!!! I can't get my trim off

    The trim pulls right off if I remember correctly. It's just press-clipped in. If it's the head unit you're having issues with, that's another story.
  5. Zero Signal

    Build Thread "Rising from Ashes" 94 Cobra build thread

    You don't screw around. That roof looked like a nightmare. Man I wish I had some body work & paint skills. What color will it be anyway? Not sure if you mentioned that.
  6. Zero Signal

    new short block on the way

    I think we need some context there. Looks like an ebay posting :shrug: An explanation and a link would be best.
  7. Zero Signal

    NEW 347 short block with flywheel and balancer

    Just an update: I checked freight costs on this and it looks to be prohibitively expensive. I will prefer a local pickup on this. I will give this a couple more weeks before taking down the ad and just installing the engine in my car afterall. Thanks for looking!.
  8. Zero Signal

    347 Shortblock with flywheel and balancer

    I priced out three different shipping companies and they were all in the $500 range :eek: for the weight and dimensions I figured. It's WAY more than I expected. I don't personally know anyone locally who can get me freight deals. This may end up being a pick-up only sale. I will give this a...
  9. Zero Signal

    Build Thread "Rising from Ashes" 94 Cobra build thread

    Very cool. What is the chemical you use to clean with for the prep work?
  10. Zero Signal

    Build Thread "Rising from Ashes" 94 Cobra build thread

    I figure you would have installed some sub-frame connectors before coating it.
  11. Zero Signal

    XE266HR Cam, Will it work in my car?

    Aside from the specifics on that cam, I'd recommend other mods first. Our heads are so bad, there's not much reason to put a new cam in and the 94-95 computers don't like a lot of cams. IF you really want to upgrade the cam, you need to make sure the heads are in good shape and your springs...
  12. Zero Signal

    347 Shortblock with flywheel and balancer

    I'm located in Tucson, Arizona
  13. Zero Signal

    project 94' gt cheap stang'

    Sign yourself up on one of the free photo hosting sites like Photobucket, Imageshack, Picasa or whatever. Then you upload to THAT and just link to here.
  14. Zero Signal

    high flow fuel pump - cause worse gas mileage?

    Probably just needs a tuneup. Our Xterra's gas mileage goes down when it's over due for an oil change.
  15. Zero Signal

    Build Thread "Rising from Ashes" 94 Cobra build thread

    They seem a bit cheap to me. I've never been a fan of the 'faux' deep dish with the bent spokes. I think your next build will deserve something like say some 18" HRE C95s :D
  16. Zero Signal

    GT40 intake swap help

    I've broken bolts while removing the stock lower due to corrosion. I heard heating the bolt a bit with a blow torch can help loosen them, but I never tried it. Try soaking them with PB Blaster. The only other problem I ran into was figuring out how to redo the vacuum system. The vacuum line...
  17. Zero Signal

    TwEECer Tuning Manual

    Any news on updated info?? I'm about to break out the tweecer again and was hoping for a PDF or Word file with this info.
  18. Zero Signal

    94 GT oil fouled plug

    Well, a good test of that would be to remove the upper intake and inspect the runners for oil. If the runner feeding the cylinder with the bad plug is black/oily, you may have your culprit. It doesn't completely rule out everything else though. If you have blow by causing excessive crankcase...
  19. Zero Signal

    Valve Cover help

    So those Comp Cams Pro Magnums cleared the factory VCs? Just wondering since you say 'factory height' and I'm putting a list of parts together. I have Fox VCs laying around, but it would be nice to avoid buying new ones.
  20. Zero Signal

    94 GT oil fouled plug

    Well, our PCV setup is known for sucking oil into the intake. There are relatively inexpensive oil-catching kits out there. But, I could do a compression and leakdown test first. See how the numbers look and try to rule out a problem with the bottom end. How many miles are on the motor...
Top Bottom
Back
Forums
Menu