Search results

  1. 2k2fourpointsix

    will 275 tires fit my bullitt?

    They fit, but make you car handle like crap. Stick withe 245's up front, and as big as you want in the back.
  2. 2k2fourpointsix

    PLease Help! Will 275/40/17 fit on the front of a '99+ Stang?

    They will fit no problem, but from when I had them on the front of my car, they handled like crap. The tires follow every bump, and groove in the road and require more steering effort in order to keep the car going straight. I would stick with the stock 245's up front. But its your decision...
  3. 2k2fourpointsix

    Suggested Alignment setting?

    Suggested Alignment settings? What kind of alignment specs are you guy running with? I autox about 4x a year and with my current alignment the outside edge on my front tires is getting chewed up bad. I just got new tires and don't want to kill them too quickly. I have the stock suspension...
  4. 2k2fourpointsix

    Benefit from Timing Advance?

    It's better to be safe and run the 93, You don't want the motor to knock under WOT and you might not hear it. If you want to mod you car, you can't pinch pennies when it come to gas.
  5. 2k2fourpointsix

    Nitto Drag radials times not so good?????

    Set them at 16 psi. and dont do a huge burnout like you want to. I do a quick spin in the waterbox, then I burn them for like 5 seconds or so, just untill they start to smoke. At this point you can feel them starting to grip, and roll to the line. If you do too big of a burn, the will get...
  6. 2k2fourpointsix

    Help with Flood info....

    STAY AWAY from flood cars. They are only good for mechanical and body parts. Anything eletronic in them will never work right. You will end up pulling your hair out trying to get one to run right. I know people who have bought flood cars, and guess where the cars ended up going? Back into...
  7. 2k2fourpointsix

    Any probs running 275's on stock rims

    Hes right, for drag racing/street driving 275's are fine. But if your planning on road course/autox'ing a 275 tire will hurt your times on an 8" rim. The tire is too wide for the rim and allows the sidewall to flex and move side to side and this will make you cars handling loose. Stick to 245...
  8. 2k2fourpointsix

    Bald Drag Radials

    Those hardly look worn out, closer to mid-life on those BFG's. Mount them on some cheap wheels for track racing days only. BFG's wear too fast for a daily driver, but are great for track days.
  9. 2k2fourpointsix

    How hard is it to steal a 99-2004 stang

    1 Vote for worst thread ever...I am now stupider for having read this.
  10. 2k2fourpointsix

    Need Help NOW! Bullitt pedal install

    Lube it up! :lol: Worked for mine
  11. 2k2fourpointsix

    gears & gas mileage..............

    I went from 230-250 to 200-220 tank after my 4.10's But I would never go back. :nice:
  12. 2k2fourpointsix

    installing timing ajuster on friends mustang need help

    Do you have the steeda pullies installed? The bolt for the T/A should be the same length as the stock bolt. If you have any doubt CALL STEEDA! You dont want to break a bolt in the crank! Many on here have had this nightmare
  13. 2k2fourpointsix

    steeda tri-axe JUNK

    I wouldn't worry about it, the 3650's come with too much fluid in them anyway. The amount that leaked is probably less than an oz. or two. A little fluid leaked out of mine right after the install but its has been fine since then. It probably leaked on some hard turns, and starts/stops. I...
  14. 2k2fourpointsix

    how to remove back seat?

    Its much easier than a 98. Take a flat scredriver use it to press a button right under the middle of each seat. Just press the button and pull up on the seat, done! and the passenger seat is four bolts and a wiring harness.
  15. 2k2fourpointsix

    Subframe Install Question

    http://www.tubechassisdesignz.com/project_cars.php look at the picture on the bottom left of this page, they install subs this way. I would only do this on a full out race application.
  16. 2k2fourpointsix

    Bilstein Strut Nut what is the trick?

    Dont you need a slotted socket?
  17. 2k2fourpointsix

    Don't understand speedcal

    It sounds alot harder than it is. I just put one in last week. Jack up the drivers side of your car, and you will see the VSS on the Drivers side of the tranny, just under the shifter and from there follow the directions step for step. PM me if you have questions, I could walk you through it...
  18. 2k2fourpointsix

    Magnaflow Problem

    blue loc tite has worked on mine for over a year now.
  19. 2k2fourpointsix

    Need to borrow part in Northeast

    edit
  20. 2k2fourpointsix

    First Problem with Stang Please help

    Before you do anything expensive, get a can of TB cleaner and clean out the IAC valve. Your symptom sounds like that could be the culprit.
Top Bottom
Back
Forums
Menu