Search results

  1. S

    Best cam for 10:1 306??

    Thanks f0r the link man. Is the FTI cam worth the money. It is kinda outta my range right now. If I plan on getting some nice heads, I should probably wait until I have the heads to get a custom cam right? I appriciate the help.
  2. S

    starter runs after startup

    I had the same problem and it was the starter relay.
  3. S

    Best cam for 10:1 306??

    I know this has probably been covered a million times but I cant seem to dig it up. I have an e-cam now and alot of people say that is holding me back. I have a positive deck and Ross pistons in it. The heads are stock , ported by my engine builder w/ 5 angle gigantic valves and milled a bit. I...
  4. S

    Who's a good spark chaser?

    OK, we replaced the relay to the eec and checked another in line fusable link(18gage). Any suggestions now. Could the computer have taken a sh**? Just curios. It is speed density and everything else seems to check out, but we havent checked every individual wire yet. Should we? Please help!
  5. S

    do plat plugs = power loss

    Im sold!!!!25's it is!!!
  6. S

    Fuses for 88 5.0-Where?

    Hey man, go down about 13 threads on this page and read my thread titled"Who's a good spark chaser".thats all about your problem. Hope this helps.
  7. S

    Who's a good spark chaser?

    Yea, we replaced the relay to the pump and nothing happened, still no power to the pump. Thanks for the input, we will try the bypass in the morning and let you know what we come up with. Thanks guys.
  8. S

    Fuses for 88 5.0-Where?

    Hey man, I just talked to a guy that said it is probably the eec relay. Do you remember if the check engine light came on when we were turning the key in the on position? If not then thats what it is. Also the inertia switch I showed you in the trunk, if that is bad then you wont have power at...
  9. S

    Who's a good spark chaser?

    I thought of that but didnt feel like getting the schematic out and tracing wires. I mean Im willing to go all out to fix a guys car but he needs to do his research too right? I will do that, with the enertia switch. But even if the enertia switch and starter soleniod was bad, wouldnt the pump...
  10. S

    do plat plugs = power loss

    I have bosch plats in my stang, well now Im gonna change them out after reading this thread. Do you have a part#> Or will the Autolites 3924's work fine with iron heads?
  11. S

    Who's a good spark chaser?

    But the fuel pump never primes. You cant hear it bzzzzzz when you turn the key in the on position. Could that still be the starter solenoid? And the pump is good, we checked it directly to the battery. PLease help, I really appriciate it.
  12. S

    Who's a good spark chaser?

    All right , I have been helping this guy I know with a fuel pump install cause he had a stock one. Well I sell him a 190lph for $60 and install it for him. The car cranks up and ran fine for 2 days. On the 2nd day his car just shut off while he was driving. Now its sitting in a parking lot. I...
  13. S

    replaced heater coil now stang won't start!

    What's a heater coil? J/K Im messing with you man, but its a heater core! You need to take a load tester to your battery. It doesnt mean sh** if you have volts, your load test may come back bad and that means NO cranky cranky if ya know what I mean. If its good then start probing important wires...
  14. S

    Windshield wiper moter

    www.50resto.com
  15. S

    what are the advantages of a aluminum drive shaft?

    Love mine!!!!! No problems in 3 years, 11second street car.
  16. S

    Don't trust every thining you here from Summit?

    Hey bud, We order from Summit for the second to none customer service, Thier tech dept. is filled with kids that know very little about everything they sell. Keep in mind Summit cant be held accountable for what one salesman told you you needed. Sorry about what happened but I stick by Summit...
  17. S

    Performer head/cobra intake Dyno #'s

    You should set your fuel pressure with the vaccum off. That is part of your problem. Your pressure is off and causing it to run rich or lean.
  18. S

    Romac Balancer installed, noticed difference...

    Ram 360, where you asking me how much for my solid mounts or price of the dampener? Just checking.
  19. S

    Romac Balancer installed, noticed difference...

    Yeah, I have solid mounts right now but thinking of getting rid of them to get a set of conv. mounts from a 90-92 model. Are there pros and cons to this, and what tranny mount is the best. I have a stock one now, is it benificial to get a energy suspenison mount? Whats the prognosis?
  20. S

    Romac Balancer installed, noticed difference...

    I just bought a Pioneer. Will it still be vibrating throught the steering wheel even with solid motor mounts? what do you think guys?
Top Bottom
Back
Forums
Menu