Search results

  1. CRASH7772

    help with cam

    If your not changing the heads then I don't see a real need to change the cam and if you have a roller cam the wear is almost non existent. The stock roller cam is 266°/266° duration, 0.444"/0.444" lift. If you want to add some lift I would get a set of extruded 1.7 roller rockers. I think you...
  2. CRASH7772

    don't know what k-member to buy!

    Shopping for one as well. I want to keep my Eibach springs and KYB struts though but want to get tubular a-arms as well. I like the sound of the Maximum Motorsports one but options seem minimal. I got the ok to "finish" my GT so this is one thing I wanted to add to my list. Might have to dig...
  3. CRASH7772

    running rich SD

    In reference to the FPR...On my 87GT my stock one was running 42-43 psi and running rather rich. Once installing the a Kirban FPR I set it to 38 psi and took it to the dyno. After running on the dyno the car liked 37 psi the best with almost perfect A/F ratio across the board. My MPG's went up...
  4. CRASH7772

    Cam and heads, the next step

    AFR's or Trickflow if you have the money IMO for heads. Trickflow has a decent matched kit for a little over 2k but the cam isn't the greatest. Trick Flow Specialties TFS-K514-360350B - Trick Flow® 360 HP Twisted Wedge® Top-End Engine Kits for Ford 5.0L – SummitRacing.com
  5. CRASH7772

    Body Parts/Kits

    I have some questions as I'm starting my search for parts....Car is a 1987 GT and is going to be a street, strip, show car hopefully but not really a daily driver (more of a toy). I already have the ground effects kit and hood picked out. I plan on putting in a 4, 6, or 8 point cage as well...
  6. CRASH7772

    anyone got a flywheel lying around?

    I have 2 somewhere. One if from my 87GT with under 90k on it, the other one was bought with a trans package and unsure if it's oem or not. I'm in central NH. If interested let me know.
  7. CRASH7772

    Progress Pictures of the engine bay and new parts!

    My only question is when do you want to start working on my engine bay? Looks good, can't wait to see the final product.:nice:
  8. CRASH7772

    To sell or not too sell!!

    If it's a nice clean car you will regret getting rid of it someday. I would hang on to it and get antique plates (25 years?) and collector car insurance and drive it only on certain days even if you park it for a couple years. Clean Fox's are hard to find and I wouldn't trade mine for any newer...
  9. CRASH7772

    Stock 1/4 Mile Time?

    100% stock 1987 GT 5 speed with 84k (just after I bought it). [email protected] backed up by a second run of the same numbers at Epping NH.
  10. CRASH7772

    couple exhaust header questions

    IMO #1 Not really #2 No #3 Not sure on ft lbs #4 On the ground until you bolt h-pipe to headers then enough to get the h-pipe in and tightened
  11. CRASH7772

    New Magnaflow exhaust clip

    http://www.zippyvideos.com/5614436994781816/in_car_0-75_0001/ One more from inside the car with the same mods as my last video above. The crunching sound is the camera on some paper.
  12. CRASH7772

    New Magnaflow exhaust clip

    http://www.zippyvideos.com/115391673733635/stock_headers-2.5_mac_pro-chamber-2.25_dynomax_cat-back/ http://www.zippyvideos.com/8809519785875666/untitled_0004/ http://www.zippyvideos.com/185579324872635/current_sound_0001/ I like them.....
  13. CRASH7772

    Trick Flow Street Heat intake TB question

    I wonder if things changed over the years. Although this info is several years old it slightly different than above. This is off a page posted in here. MAF AIR FLOW DATA (In CFM): 1.Stock 5.0L 58MM (89-93 Mustangs), 606 CFM 2.Stock 5.0L 70MM (94-95 GT/Cobra Mustangs), 815 CFM 3.Pro-M Bullet...
  14. CRASH7772

    aluminum flywheel good or bad??????

    I need a correction on my above post. I had the decimal place in the wrong spot (and the more I read it I knew something wasn't right). A best ‘before’ of 13.713 was seen as apposed to a 13.651 for a reduction of 0.062 seconds. As for speed this only went up by a tenth of a mph. When the...
  15. CRASH7772

    How to test Fuel Pressure Regulator

    Was at idle but with vacuum line removed. And I didn't pull any codes either.
  16. CRASH7772

    aluminum flywheel good or bad??????

    Test show that the flywheel is good for about .5 reduction in the 1/4 with a good driver. You do need to launch different due to the flywheel being lighter but if you can get it down you will see a reduction in E.T. Also the thing I like is with the steel if the tires break loose it revs up to...
  17. CRASH7772

    Trick Flow Street Heat intake TB question

    I have a 70mm now on mine but will be going with a 75mm at some point. From all the information I have seen a 75mm won't hurt you at all. I do know bigger isn't always better but from the few dyno's I've seen this isn't the case plus I like the idea of it being port matched to the intake even if...
  18. CRASH7772

    How to test Fuel Pressure Regulator

    I know mine was running rich so I bought a Kirban FPR and liquid filled gauge for under $100. I put the gauge on first and found out my stock FPR was running @41psi. I put the Kirban and set it to 38PSI, I picked up a little acceleration and MPG's went up about 4-5. I was SD at the time as well.
  19. CRASH7772

    cheapest place for OEM stock clutch cable

    I have one from my 87GT with under 85k on it. I went to the 3pc UPR kit. If your interested send me a PM and make a shipped offer.
  20. CRASH7772

    what size injectors

    Stock fuel pump will run out before injectors IMO. Both are good for around 300fwhp.
Top Bottom
Back
Forums
Menu