Search results

  1. R

    Clutch and Clutch cable blues.....

    Man am I about to drive my car into a lake... I am having to adjust the clutch cable at the firewall almost daily for my clutch to work, which will soon come to an end because i wont have that many threads left to turn my adjuster. In the morning, when the car is "cold", the clutch cable...
  2. R

    Cam Suggestions????

    who is ed curtis and what is his #
  3. R

    Cam Suggestions????

    nobody?
  4. R

    Cam Suggestions????

    I have been told through pm's and posts on other threads that I have started that I would benefit from going with a differnet cam based on the setup that I have below... 302 block bore to 306 hydraulic rollers 1.7 RR's B303 cam RPM performer heads RPM performer intake MAC...
  5. R

    HP question

    bump
  6. R

    HP question

    it does, and that sucks about your run. How did you like the F cam. ie., idle quality and such.
  7. R

    HP question

    the B303 was the stock cam?
  8. R

    HP question

    I am the recent new owner of my 3rd 5.0 and have a HP question that I hope someone could give me help with. The car I bought is a 92 LX coupe with a new motor that was put in in Jan '05 (I have the receipts). here is what it came with... 302 block bore to 306 hydraulic rollers 1.7 RR's...
  9. R

    Clutch Question

    OK I will try your advice. Let me see if I got this straight. To tighten up my adjustment, I unscrew the small allen nut and turn the firewall adjuster counterclock wise all the way and then tighten the small allen nut?
  10. R

    Clutch Question

    bump
  11. R

    Clutch Question

    its not. Here is what happened today. This morning, while the tranny was still cold and not yet warmed up, everything worked fine. The shifts were nice and smooth. As it warmed up, it became harder and harder to put into gear so hard at times that while the clutch was fully depressed, i had...
  12. R

    Clutch Question

    bump
  13. R

    Clutch Question

    Maybe i have myself confused. When i meant the clutch fork, i meant the part that the cable attaches to at the transmission. I can see that through the engine bay and that moves plenty. I only have maybe 1/2 - 1 inch of play on the clutch pedal itself.
  14. R

    Clutch Question

    once you got the pressure plate changed did that fix your problem?
  15. R

    Clutch Question

    I dont think that its the adjustment that i need, the clutch fork moves plenty, I have adjusted it both ways and still have the problem
  16. R

    Clutch Question

    bump
  17. R

    Clutch Question

    Hey all, I am having problems putting the car in gear. Sometimes it goes in without problems, and sometimes i have to use two hands to get it into 1st. I have checked the play on the clutch and that isnt the problem. Also when the clutch it depressed, the clutch "arm" on the tranny moves a...
  18. R

    UPR quad,firewall adjuster, where do you guys have yours?

    Not to hijack your thread, but I have the steeda quadrant and I am having the same problem as Demon insofar as I am having to press the clutch as far as it would go, and also having to rev the crap out of it to get into gear. 1. Is it more important to have the cable on the 2nd hook or is...
View older results
Top Bottom
Back
Forums
Menu