Search results

  1. bso

    Bullitt peddle covers!!

    Paint can opeing tool works real well.
  2. bso

    Brakes: Best Bang for the Buck...(Under $1k)

    Brembo pads dust LAMF on my Brembo kit. They also squeel on low speed stopping, but I would not trust anything else on my car when I do agressive driving... Well worth the money.
  3. bso

    Do i really need extended ball joints?

    You will need spring spacers as well or else you will drop another .5 inch. Things to check if you need them is the position of your outer tie rods vs. the angle of the lower control arm. The ball joints are also meant to work with the bumpsteer kit to get the most out of your suspension for...
  4. bso

    power mirror question

    Remove the mirror of the door. Rotate the glass till tabs that hold it to the motor are exposed (flashlight helps). Use a small flat head screwdriver to lift the tabs of the clips slowy prying each one. There should be four tabs total.
  5. bso

    Bad boost gauge, sender, or grond?

    I do get max boost on the gauge. Drops to 5lbs and stays, but will drop to zero over night.
  6. bso

    Bad boost gauge, sender, or grond?

    Trying to figure out why my electric Saleen boost gauge needle does not go down after a while of driving. Pulled the sender wire and needle dropped instantly, but works fine when engine is cold. Sender is relatively new from Saleen, but could be bad. Any thoughts what to check before I start...
  7. bso

    MM K-member brace

    Just in installed the 4pt brace last month. I like it alot myself, but pending what you want to do with the car, I would research all MM parts first on how they work and figure out what you can afford to spend.
  8. bso

    New KB dyno #'s plus graphs & story

    Where is your FP set at now having it adjustable and was your car tuned with the act sensor in the intake?
  9. bso

    Need help on changing spark plugs

    How about undo the smog piping bracket at the alternator, pull out the rubber smog hose from the metal tube and push everything out of the way. Passenger side is the easiest.
  10. bso

    bbk longtubes and frpp dipstick help!

    Thru which tubes does the FMS goes between and can it be bolted to the header bolts?
  11. bso

    Dyno Tuners in STL, MO.??

    If you know anyone close to the area that would be great, since I will have to limp the car to the dyno after install and long distance driving would probably be not good. (I will be running a chip from another car just so injectors and MA match.) So far my research on shops around me, I have...
  12. bso

    Dyno Tuners in STL, MO.??

    Will be installing a KB in my 94 GT next weekend. Looking for response on good tuners with experience with KB blowers in my area. Any recommendations??
  13. bso

    Master Cylinder Finally In! More Bling

    What tools and material needed to polish something like the MC?
  14. bso

    Aftermarket Aluminum Radiators for 94 / 95 cars?

    http://www.crracing.com/ The website has the company info. for contact. I think they are finally selling to the public now. In the past, Steeda was one of their distributors.
  15. bso

    Aftermarket Aluminum Radiators for 94 / 95 cars?

    I got a C&R radiator in my car. Great fit and finish. Ford uses them on the GT40's and Steeda also sells them under their own name.
  16. bso

    Problem with MM firewall adjuster and adjusting it

    Steeda makes a spacer that slides on the stock cable so it can be used instead of the aftermarket cables. I went back to stock because the aftermarket unit never fit right and it is not as smooth as stock during shifting.
  17. bso

    Dip stick and tube question?

    http://forums.stangnet.com/showthread.php?p=5534329#post5534329
  18. bso

    trade vortech for kenne bell???

    Will the Kenne Bell units produce too much heat that eventuallly will lead to engine knocking and running too hot? For example, how will those units fair in the summer heat and will tuning be a problem due to detonation?
  19. bso

    Any really sharp looking rims out there besides Cobra R's?

    I still like the white Saleens look, other than they are very heavy.
  20. bso

    what speedo gear for 373s?

    Have the parts guy pull some speedo gears for the jeep. It should be white and have 23 teeth on it. Bring in your old one to match up the dimensions.
Top Bottom
Back
Forums
Menu