Search results

  1. P

    Anyone want to throw a HP number out for the mods on this foxbody ?

    aawww, thats nice :rlaugh: good luck and post your numbers when you're done
  2. P

    Anyone want to throw a HP number out for the mods on this foxbody ?

    i say 250ish rwhp and with a drag radial and a good driver, probably high 12's are possible.
  3. P

    thinking of a head and cam swap.

    ok, heres what i am tossing around in my head; my 67 stang has a 5.0 with gt40x heads and the x303 cam. i'm thinking of swapping them with the gt40 iron heads and stock cobra cam in my 93 lx 331. i would also swap the cobra 1.7's to the 67 and use the stock 1.6's in my stroker. my 67 is...
  4. P

    spec stage 1 or stage 2 clutch?

    i'm ordering my clutch tonight and i cant decide between stage 1 and stage 2. so, with my mods, let me know what you guys think. i will be running a drag radial at the track and street tires on the street. i've had puck style clutches before and i really dont care for the chattering. thanks in...
  5. P

    does this pattern look ok?

    oh. well in ca, part of the test is to check timing. :( damn!
  6. P

    Black stuff coming out of exhaust?

    +1
  7. P

    sn95 front seats in foxbody

    they make pills for that, right? :nonono:
  8. P

    does this pattern look ok?

    ^^^thats insane! you're car must run really well because the x cam is pretty stout. oh well, maybe ill just go ahead and do the swap now and see what happens. come smog time. ;) know of anyone getting rid of a tfs1 of b cam?
  9. P

    What does an unbalanced motor sound/feel like?

    i just rear you put in control arms. are they adjustable? if so, you may not have the right pinion angle. try to adjust them slightly and see if it changes at all.
  10. P

    What does an unbalanced motor sound/feel like?

    if you had the trans out recently, check the driveshaft bolts at the yoke to make sure they arent loose. is the vibration/sound constant or does it oscillate?
  11. P

    new wheels just arrived

    you bet :nice:
  12. P

    does this pattern look ok?

    yeah, once i pass ca smog, i'm swapping a tfs 1 or b-cam. :D
  13. P

    What does an unbalanced motor sound/feel like?

    so it sounds like you cannot duplicate the problem just by revving the engine? you have to accelerating at fwy speeds? if so i would suspect a u joint or prop shaft. if you can duplicate it by just revving the motor, this is all wrong so post back to clarify.
  14. P

    does this pattern look ok?

    my cam is pretty much stock. its from a 93 cobra, with the crane 1.7's hopefully it will feel faster. i want to run mid to high 12's
  15. P

    new wheels just arrived

    all cragar style wheels with slotted lugs are the same concept and have been around forever. these use an offset washer instead of the cragar style which has a regular washer. the washers sit perfectly into a countersunk hole which makes for less movement than the cragar setup in my mind. so i...
  16. P

    new wheels just arrived

    its part number sum-7540143 basically a shank style lug nut which uses a washer with an offset hole. these also feel really light, im not sure of the weight though. i was going to weigh them but i already mounted the tires.
  17. P

    does this pattern look ok?

    nice. i love the day after a gear swap-its like i picked up 50 rwhp going from 2.73 to 3.73 with my mods should be fun. thanks for the help guys btw to remove the nasty yellow stuff, is brake clean ok?
  18. P

    does this pattern look ok?

    getting closer. i removed the factory shims and installed a .044" shim (thicker than the factory shims) and it looks better. now i will check backlash and yes i will be using a dial indicator. http://www.stangnet.com/mustang-forums/members/project67-albums-stuff-picture4871-picture-038.jpg in...
  19. P

    new wheels just arrived

    they're like 30" if they do fit, i wonder if my motor can spin them? :scratch:
  20. P

    new wheels just arrived

    thats what i thought then i saw an ad in the classifieds where a guy is selling them with pics on his notch. shows tire clearance, etc and i pm'd him, got the wheel size, etc. the title is "hoosier 295/65r15 slicks cheap!" so i hope they will, otherwise i will get some 275/60's but i couldnt...
Top Bottom
Back
Forums
Menu