Search results

  1. D

    Possible Afr Issue

    Fuel pressure should be at 39 with vacuum disconnected. Your chip was burned for 19lb injectors and whatever MAF you had before the PMAS. You weren't clear on whether the gt40's 1.7 rr,e303,cobra intake were on the car when the chip was burned. In any case, 30# injectors seems a little high...
  2. D

    90 Lx Falling Flat On Its Face...help

    ECT=Engine Coolant Temperature. If this sensor is bad, it could definitely effect your EFI. It's a relatively inexpensive part which fastens into the thermostat housing. I would start with ONLY that change, reset your codes. If #21 is addressed, it is possible that #12 goes with it (ie...
  3. D

    Post pics of how your foxbody currently sits

  4. D

    Egr Delete

    Careful hoss -- check with your local Emission/Inspection shop. Some locales will require all original Emission equipment be in place to pass inspection. Each state (and sometimes counties within states) can have their own requirements.
  5. D

    Neutral Safety/interlock Switch - A Different Kind Of Problem

    I have (what I think) is a unique situation. Several months back, I had a problem with a 1-year old NSS. I pulled the 2 connectors out, placed a jumper in both, and the car started. Of course, it started without having to depress the clutch. Not an ideal situation, but low on the priority list...
  6. D

    TUNER CHIPS

    http://www.stangnet.com/mustang-forums/threads/best-way-to-tune.855813/
  7. D

    best way to tune

    Goto: www.eectuning.org and read the FAQ's / tech documents to come up to speed with what you're considering. There are Do's and DON'Ts IMO: Moates Quarterhorse (hardware), Binary Editor & Engine Analyzer by Clint Garrity (Software) is the way to go. Great flexibility. Just one...
  8. D

    Help-i Need 2 Pics Of Convertible Weatherstripping

    I'm thinkin I'm going to get lost in the sauce
  9. D

    Help-i Need 2 Pics Of Convertible Weatherstripping

    Hey guys, Would appreciate a little help on my 1992 Mustang Convertible project. Project started years ago... just finishing up now. I'm having some difficulty making sense of these new weather strips. I need pics of the weatherstripping which goes along side of windshield and down and...
  10. D

    Alternator - Headlights dim - UD Pulleys

    Yes, but they're Pretty... Pretty Shetty ! File that one under "It seemed like a good idea at the time". Thanks for weighing in... have a great weekend !
  11. D

    Alternator - Headlights dim - UD Pulleys

    The Crank pulley I have is 4.5". If I recall, this is in Underdrive... it was suggested that the Stock pulley is 5.5" OD I spoke with the Alternator Mfg (PA Performance), and factoring in the size of my Crank pulley, we determined that I'm only getting 1620 RPMs from the alternator @ idle...
  12. D

    Alternator - Headlights dim - UD Pulleys

    I've read through several entries regarding this subject as my car is exhibiting issues in this area. Specifically, when the car is idling (900RPM+), the headlight brightness is relatively dim. Alternator voltage output in this RPM range is in the high 12s --> low 13s If I have the Mrs...
  13. D

    Post pics of how your foxbody currently sits

  14. D

    Electronics - Generic - Adjustable Voltage ?

    I'm modifying an existing headlamp assy to include "Audi-like" LEDs within the 2 units. After installing and testing, these lamps are little too bright for my liking. I've read about installing simple voltage regulators that will allow me to drop voltage on the LED's. I don't know exactly...
  15. D

    swiss cheese engine bay

    Pic Whore ?!?! <LOL> Dude --- that got my day started with a good laugh ! Kudos & Thanks..
  16. D

    swiss cheese engine bay

    Oh Hell... Gotta head to lowes to get a hole saw then...
  17. D

    ECT / Datalogger / instrument cluster - Gauge issue

    I recently did a light spray and cleaning on my engine compartment with a light soapy mix followed by a clear water spray down afterwards. Immediately afterward, I encountered an odd condition. My instrument cluster Water Temp gauge now shoots up to 210 while my BE datalogging ECT slowly...
  18. D

    347 Stroker Parts List?

    This question is vague.... You can spend big coin on the reciprocating assembly -OR- reuse some part and cut costs...This area is where the most money will be spent. Will it be street only ? Do you want to build a simple 347 and just stop there... or will you continue to add products to...
  19. D

    Instrument Cluster Fitment

    I'm selling an instrument cluster which came out of a 1992 LX 5.0. Aside from 1990 thru 1993, will this fit an earlier year... specifically, 1987 ? TIA, -D
  20. D

    I'm looking for the tach wire

    Yes, Negative side of coil -OR- You can tap into the signal which feeds your factory tach: which would be the Dark/Green & Yellow wire for an 87-89 Mustang. or Pin #11 (tan & yellow) on the left side cluster connector for 1990-1993
Top Bottom
Back
Forums
Menu