Search results

  1. CobraM23

    96-04 Trick Flow Track Heat Intake Manifold

    This manifold was on my car for approximately 5k miles. It is the single 75mm TB opening version. I took it off and went with the Edelbrock Victor Jr. because I needed more room in front of the motor to mount my 76mm turbo. The reverse orientation of the alternator the manifold requires will...
  2. CobraM23

    Car is back from paint. New pics...

    Forgive the quality of the pics. I used an old 2MP camera I had laying around.
  3. CobraM23

    Cobra foglights wont fit?? Need help

    The bodyshop called me today telling me that my new foglights wont fit onto my 96GT. Ive got a Cobra bumper going on and smoked fogs to match my smoked headlights. I ordered the lights and the brackets but they insist that they wont fit. They said theyd have to cut either the bracket or the...
  4. CobraM23

    New Dyno #s!

    We had a dyno day @ Ride Revolutions in Johnson City, TN on Saturday. $40 for 3 pulls. My old numbers were 254rwhp and 280rwtq. Ive since added C&L plenum, Accufab 75mm TB, and Steeda U/D pulleys. These are the new #s. The torque peak number was before the converter locked up so it was...
  5. CobraM23

    Steeda alternator pulley rubs

    I just got done with the install last night and noticed the pulley is sitting right on the alternator. When I turn the pulley by hand it makes a grinding sound. I spaced it out further with a washer and it seems to work ok. Has anyone else encountered this? Do you think the washer will work...
  6. CobraM23

    Headlights and Foglights dont work?

    This problem just started 2 days ago. I turn my headlight switch on and only the parking lights come on. No foglights or headlights. I dont have low beams or high beams right now. When it first starting happening, Id just pull back on the turn signal lever a little bit and the lights would...
  7. CobraM23

    HVAC vent problem

    Hey guys this just happened yesterday. My cars HVAC stays on defrost no matter what I set it to. It will switch off when in the OFF position but no matter what A/C, MAX A/C, FLOOR it blows out the defrost vents. What could possibly be wrong and how do I fix it?
  8. CobraM23

    ET Streets or ET Drags?

    I have a pair of 15X7 6 cyl mustang wheels that I'm wanting to mount slicks on. Which are better the ET streets or the ET drags? Whats the difference between the two? These wont be driven on to the track, I will be switching them over at the track. What sizes would I need for either?
  9. CobraM23

    new best at track last night

    Last night was the first night the dragstrip was open and I took my car up to see how much the headswap helped out. My best previous runs were 15.1's-15.2's @89-90mph with a 60' of around 2.2 or so. Well last night the track was terrible, I saw LS1 camaros and firebirds running low 14's with a...
  10. CobraM23

    Do you really need your rear swaybar?

    I had a really bad rattle coming from under the right side of the rear seat for the past couple days. Well I jacked up the car and found that the rear sway bar was broken clean through where it mounts onto the lower control arm. Took it off and no more rattle. The car rides the same, I took...
  11. CobraM23

    Got my new longtubes & xpipe in!

    I got them in yesterday. I must say they are beautiful. I almost dont wanna put them on the car just because they look so great. They are Jet-Hot coated inside and out. Even the X-pipe is coated as well. Heres some pics:
  12. CobraM23

    Sportlines and Tokicos are in!!!!

    Well it took me and my dad about 6 hours to put in the springs and new struts and shocks. We really took our time and made sure everything was right. I must say that I was amazed at how it changed not only the stance of the car, but the handling as well. The car has absolutely no nosedive...
  13. CobraM23

    Hows my suspension setup?

    I ordered some Eibach Sportlines for my stang. Now my question is about my choice of struts and shocks. I got a great deal on some Mach 1 struts and shocks. Now I researched and found out they are Tokico HP's revalved for a 1" lower suspension on the Mach 1. Will these work out for me with...
  14. CobraM23

    94-98 Smoked headlights

    Ive had these on for awhile but finally got around to take a pic of em. I got these from Tom at ultimateautomotive50.com. Really great guy and awesome service. They really set the car apart from others and Ive gotten several compliments about them. smoked headlights
  15. CobraM23

    Is my tranny going bad?

    I had a PI 3000 Stall put in a couple months ago. When I had it put in, the shop that installed it said they had to sand a little bit of material off the transmission shaft so the converter would go on fully. Well it worked wonders knocking .35-.4 off my 1/4 et. However I would notice...
Top Bottom
Back
Forums
Menu