Search results

  1. 74ProII

    OK, who's going to Mustangs Northwest Roundup?

    ME, with the 93, trying to get daughters 83 gt ready by the port orchard show. No II till next year. Got to live up to promise to daughter....
  2. 74ProII

    Parts Keep Piling Up In My Bedroom...

    Does having a fully dissassembled 351C4v in my locker in my barracks room count. Clean and back in the day of course. All the new parts were collecting under the bed as I could afford until assembly.
  3. 74ProII

    351C 4V Buildup

    I currently run a 351C 4V in my 74. I would glady discuss it with you via pm if you so desire. 4V blocks are hard to come by, the 351cj/boss are mechanical cammed 4V's. A far as a 351W it seams they have become the carryover 5.0 craze. With that reasoninb why not just 347? While I do not look...
  4. 74ProII

    This Is Painful To See....

    Not to justify it or anything, but how many times have you seen things that were never supposed to be straight from the factory. A prime example was my mom's 85, which was bought off the car carrier. It was such a low run of 85's that nothing on it at least motor wise was correct according to...
  5. 74ProII

    Engine fitment...

    Besides the obvious.... you will also have issues with the valve covers and the blower motor. Having a 351C4V in mine, I would definately advise it unless youplan to put a frame into it. there used to be a black 74 that was featured from WA back when 460 fairmont and zephyers were the craze.
  6. 74ProII

    85 vs. 86 vs. 87> engines

    If it wasn't a roller...identical to 83-84 pistons.
  7. 74ProII

    You Want Loud? I'll Show You Loud. . ..

    It will be interesting when I finally put mine back together. My ex setup (sonic turbos with turndown foward of the axle) would set off car alarms just by turning over before it started. It was fun...
  8. 74ProII

    It's Alive! 351W Gob's of torque!

    when we going to see more of it han the avitar there 78Pinto?
  9. 74ProII

    removed the spare tire area

    Can we run it on MOONSHINE???? Give me Octane , or give me death!
  10. 74ProII

    removed the spare tire area

    I was going to put a cell in years ago. The reason I didn't was because of incompatible fuel senders, and the high degradation rate of the foam. Everyone that I have known had problem with that if the car was other than track or garage queen. I ended up using my stock tank, rotating it 90...
  11. 74ProII

    Anybody see this one?

    IIcrazy, yeah me too, many years. I'll figure it out on of these days. You should have went last Sunday. You would have got a 1st place. Not one II there.
  12. 74ProII

    Mustang II popularity

    The biggest problem is you cannot appreciate a II unless you owned one in good condition. Most people get them as broken down and neglected unless of course it is a "cobra". That unto itself creates a snubbing effect within our own stepchild status. :shrug: It is bad enough no one else likes...
  13. 74ProII

    Uh oh, now everybody is going to freaking have them

    T-birds where they came from, just changed slightly. I always hated them. Always liked the cobra's but never liked the IROC rear spoiler either. Oh well.
  14. 74ProII

    Whidbey Island Car Show

    Not sure yet myself. Kinda hate showing the 93 with the paint and rim problems. Well see. If I do I'll be with the Kitsap club.
  15. 74ProII

    if you need them....here they are

    I know this is old , but I do remember a thread along time ago that listed 66-68 falcon 289 mounts as working. Which at the time were around $70 a side. D7ZZ-6038-A, and D7ZZ-6038-B
  16. 74ProII

    Where to buy 4-lug Cobra R knock-offs??

    www.oeperformancewheel.com
  17. 74ProII

    Muwahaha, time to add a little bit more 'go fast' stuff

    I would definately ensure the solenoids are working properly before you install. I would dissamble, clean up/ reassemble first. They has a tendency to stick after sitting around. I throttle switch would do you well.
  18. 74ProII

    734/818 at the rear wheels

    :hail2: :hail2: :hail2: :hail2: :hail2: neeeeeeeed mooooooorrrrrrreeeee horsepower.......
  19. 74ProII

    ThunderSnake is a roller! Custom wheels finally done..

    Outstanding! That's an interesting rear spoiler only ever seen one other that way. Ahhhh the very popular SSM liftbars as well..... Gonna be fun!
  20. 74ProII

    05 mustang

    Well to play fair I guess we should bring a Falcon over! No not the UTE, the V8 of course! As for fast II's, yeah they are nice, but we modify them becasue we are stang owners. They were never designed that way, as most Mustangs were. To each it's own unique place and time.... But being first...
Top Bottom
Back
Forums
Menu