Search results

  1. raz54

    '96 v6 Stalled in traffic -help

    +1 on the fuel filter. My car only had 24 K on it when I bought it yet the filter was so plugged I couldn't blow through it.
  2. raz54

    Car running horrible after exhaust and CAI install

    You don't have enough back pressure now for a stock motor.
  3. raz54

    02 MUSTANG V6 AUTO CAI QUESTION "FEEDBACK APPRECIATED"

    Put in a K & N filter. The power gains are the same and in some states a CAI is not legal (Ca, for one) unless it has a C.A.R.B. sticker on it.
  4. raz54

    HELP! My Mustang is making horrible sounds!!!

    I would do as ChingonStang said plus lube all the exhaust hangers with some WD40.
  5. raz54

    Could Yall HElp Me

    A bigger radiator and fan
  6. raz54

    o2 sensor location

    On the 3.8 there are 2 up high before the first 2 cats and the second set right in the front of the rear cats.
  7. raz54

    Could Yall HElp Me

    Computer,wiring harness, all the sensors, exhaust and possibly a bigger fuel pump.
  8. raz54

    Power steering drain / Fuel Filter

    Any time.
  9. raz54

    Power steering drain / Fuel Filter

    The fuel filter is right behind the rear bumper, very easy to get to and replace if you have the right tool to release the lines. To drain the PS just loosen a line on the rack and let it drain.
  10. raz54

    air-fuel ratio problem code p1131

    It could be as simple as plugs, wires, or fuel filter plugging up. Do as cjones said and check for codes first though.
  11. raz54

    HERES A GOOD ONE FOR U MUSTANG EXPERTS ( take a look)

    + 1 on the sticky cable
  12. raz54

    CAST YOUR OPINON HERE!! mustang accessories

    I think hood pins look fine but they can scratch things up. Fog lights are good, if you have much fog. Replacing the stock filter with a K & N filter along with removing the silencer tube is cheaper, gains the same hp and tq (on a NA engine) and is 50 state legal, not all CAI's are legal.
  13. raz54

    COLD AIR INTAKE QUESTION (Mustang v6)

    For replacing just a filter the K & N filter replaces what you already have so it will install the same way and in the same place.. Just unbolt the air silencer from the inner fender, then undo the snap clasps on the main filter housing and pull it apart. The filter sets inside. Next slip in the...
  14. raz54

    3.8L Ideas and tips

    Most of your plans sound good but forget the TB and TB spacer. The spacer is a waste of money and won't give you any hp or tq. A larger TB won't do much either without some motor mods first, like a cam, better flowing heads, higher flowing injectors, etc, etc. You can install a intake spacer...
  15. raz54

    NOS

    Running even in the 13's is very impressive with a stock (motor) V6 for sure but all I was saying was you can't run mid 12's being totally stock with these cars. Even if the motor held up with close to a 200 hp shot the suspension, open rear end and tires would hold it back and those = "go fast...
  16. raz54

    NOS

    You're getting defensive, I was saying you can't run mid 12's and have 350+ rwhp without other go fast parts (cam, springs and rockers, tires, suspension) which you admitted to. The video shows a 13.6 run (before the cam, rockers & springs), not a mid 12 which means another 100 hp. Naturally...
  17. raz54

    NOS

    It can't. There has to be other go fast parts to run 12's and to have 350 rwhp.
  18. raz54

    Muffler and Springs???

    I've heard you probably will need CC plates with a 1.5" drop. 1.25" seems to be the limit. As for how they look that's a matter of opinion. I wanted mine to set lower but not be so low it knocked ants heads off so I went with the C's. I had Eibachs (2"drop) on a Camaro and didn't like them. It...
  19. raz54

    what to do next

    A plugged cat is a possibility. Also dirty injectors or air filter.
  20. raz54

    Muffler and Springs???

    If you drop it 2" you will also need camber / caster plates in order to align the front end and if you have steep drive ways you will have to take them at an angle to avoid dragging. Check out the Ford C springs, they give it a nice rake and you won't need CC plates. On the exhaust I like...
Top Bottom
Back
Forums
Menu