Search results

  1. S

    I6 lurching while cruising, not while pulling

    thanks guys...gonna replace the fuel filter, and then onto the carb...thanks again
  2. S

    67 vertible "North American"

    The guy may be talking about a 2nd generation Ford Falcon. The original Mustangs were based off of this car. Do a search on 2nd gen Ford Falcon...hope this helps
  3. S

    Tons of 65 coupe parts...

    Thanks anyway...bump for ya
  4. S

    I6 lurching while cruising, not while pulling

    Well, there seems to be some leaking from around the carb...or at least some gunk buildup around it. I was hoping there is a "common" issue causing this problem. Thanks again for the help...
  5. S

    I6 lurching while cruising, not while pulling

    Hey guys, My first real post here. On my 65 mustang coupe, I6 with 3speed, it seems to drive fine until you are just cruising at a constant speed. It seems to be lurching. Giving it gas, it seems fine and pulls hard. But go back to cruising and it lurches. It has new...
  6. S

    Tons of 65 coupe parts...

    I need some window regulators(scissors) for both sides of a 2 door coupe(65 model). Screw on handle. Let me know a price shipped. You can email me at [email protected] Thanks
  7. S

    Mach 460 AUX is it there? or a mere myth?!?

    It doesn't take but like 10 minutes to pull out the radio and find out. I just pulled apart mine the other day(it has an aftermarket cd player though). Just unscrew the shifter knob and take it off. Pop off the plastic piece with the boot on it. Unplug the cigarette lighter and the whole...
  8. S

    New mustang, few problems, please help!!!

    Also, could the egr not being there cause my problems? No egr means it would change the a/f ratio if the stock tune has been installed, but wouldn't a service engine light come up? Just venting ideas here. Thanks again for the help. I know it's not anything mechanical causing the miss...
  9. S

    New mustang, few problems, please help!!!

    I have posted a picture below. The things with red on them I do not have. The ones with blue I do have. And the green arrow goes to a port on the side of that black thing. It was just open when I got the car. I put a vacuum plug on it. Where is it supposed to run to? I'm pretty sure it...
  10. S

    New mustang, few problems, please help!!!

    Thanks so much but I'm in Alabama. I just found out it used to have a KB 2.2 on it...so it has been highly modded before. Didn't know that before I bought it. I didn't really plan on modding it anymore. It is already almost too fast for me. I just want to get the miss out of it. I am going...
  11. S

    New mustang, few problems, please help!!!

    Yes, there is more blowby after a hard run...that is how I noticed the pcv was not right. Smoke coming from under the front of the car. Looked and saw some oil hanging off a cut off line. It was a line running from the pcv valve. I don't believe the blowby is too excessive, but the...
  12. S

    New mustang, few problems, please help!!!

    Okay, so I have about $1000 worth of sensors/parts suggested to replace lol...Is there any way to check these things before I replace them? I got the pcv lines ran into the intake and my clutch adjusted. I also just noticed the car doesn't seem to have the EGR on it. Basically everything...
  13. S

    New mustang, few problems, please help!!!

    Thanks for the help. The guy was letting it go REALLY cheap because of the problems so I picked it up. Anyway, I do have an aftermarket quadrant. How is it adjusted on the cobras? I saw how to do it on the regular GT's, but I'm sure it's probably different. I am going to change the fuel...
  14. S

    New mustang, few problems, please help!!!

    I just got an 03 Cobra with high mileage. Anyway, it's got aftermarket exhaust(high flow cats with xpipe and mufflers), CAI, and quick shifter. I'm having a few problems. The first is a slight stumble/miss when under load. Regular driving I have no problems, but start pushing down the pedal...
  15. S

    Stumble/PCV questions

    Hey guys, I just got an 03 Cobra with high mileage. Anyway, it's got aftermarket exhaust(high flow cats with xpipe and mufflers), CAI, and quick shifter. I'm having a few problems. The first is a slight stumble/miss when under load. Regular driving I have no problems, but start...
Top Bottom
Back
Forums
Menu