Search results

  1. R

    I have a few dtcs. what do they mean

    its the stock computer and isnt tuned or anything. today the stuttering was really bad almost to wear i couldnt drive it. could this stuff be from a bad ground on the motor or trans?
  2. R

    I have a few dtcs. what do they mean

    yes the cats are removed. its a manual trans. i have the egr removed. it is a new motor but it didnt have this problem until a couple months after the install which is why it doesnt make sense that out of no where it starts having some kind of electrical problem or whatever is going wrong
  3. R

    I have a few dtcs. what do they mean

    i have codes p0136 p1401 p1000 p0860 the car stutters when i hit the gas a little to hard. i pulled the codes but cant figure out what they mean.
  4. R

    new motor exhaust leak and missing under load

    i kinda broke the egr. i also found this big plug and cant find a place to plug it in i figured its for the egr or somthing.
  5. R

    new motor exhaust leak and missing under load

    ill check on the codes but im pretty sure its cuz i dont have cats for the o2s and i dont have the egr on my car. its probably cuz i didnt do the egr delete correctly? its deffinatly leaking at the header but it seems like its leaking where it meets up with the xpipe but even with everything all...
  6. R

    new motor exhaust leak and missing under load

    i didnt know they made locktight with a high enough temp. for exhaust but ill get some blue, i already have the red stuff that wont work though right. its a mark bottom end with npi heads, pi cam/ intake manifold, bbk shorty to xpipe magnaflow catback, steeda cai. still has the two coil...
  7. R

    new motor exhaust leak and missing under load

    i just put a new motor in my car (again) and the exhaust keeps leaking i can tighten everything up itll be fine for a couple days than start leaking again and get worse over time so i thightin and it happens again. when i go to leave from a stop i have to tap the gas to get the revs up let off...
  8. R

    99 GT into the 12's

    any type of charger will put a gt in the 12s with a decent driver, when i mean decent just dont go up in smoke or drive it into the wall haha
  9. R

    valve tick?

    yes thats what it is.
  10. R

    Life after PI heads

    just remeber its all about combination. you get stage 2 heads with stage 2 cams. certain cams with certain exhaust intake tune setup work better than others. to be sure find someone with a setup that works and works well.
  11. R

    valve tick?

    i put a new motor in and just got the loose ends done for the most part. now i noticed a tick from the valve covers. i was thinking the timming was off but it doesnt feel like it is when you drive it. any ideaa
  12. R

    will 99-04 exhaust fit 96-98

    well since it seems no one knows. ill let everyone know later tonight when i attempt the swap
  13. R

    Stang leaves me confused.

    when i first got my car i pulled the battery out over night and when i put it back in with all the terminals tight and everything it would randomly start bucking and the guages going crazy. one day it stopped. another time it was sputtering thought something bad was wrong let it sit for a week...
  14. R

    Going Cams..Valve Springs?

    you can buy stage 2 partriot heads for 1500. installing cams takes all of a couple hours shouldnt be very much unless they just workin you over
  15. R

    will 99-04 exhaust fit 96-98

    i have a friend that will sell me the exhaust off his 2001 steeda mustang for 150 but i want to make sure itll fit before i go taking anything apart
  16. R

    just bought markVIII motor for my gt now what?

    would a 4.10 or 4.30 go fast and get decent milage? if i use c heads i dont have to deal with the imrc and i can use my stock harness with a little modifications (lengthing and shortining) and when i tune it push the redline to 6800-7k. correct. will my a/c compressor work it came with one but...
  17. R

    just bought markVIII motor for my gt now what?

    how do i delete the imrc? if i run a switch could i just leave them open all the time? why would i run shuch a hot gear with the 4v doesnt it make alot of tourq and only needs to be reved to about 5k-5500. i was going to run a 3.73 with my 2v
  18. R

    just bought markVIII motor for my gt now what?

    i think im going to put 99-01 cobra heads and intake on it. i still need to get valve covers from a 96-98 cobra or can the 99-01or04 still work? "ALT your plug will as is," "youll need to use the imrc's with a prm switch. N/A it will not torque without them. if ur a manual tranny gear it...
  19. R

    just bought markVIII motor for my gt now what?

    i know i have to get the cobra intake and some headers, anything else?, but as far as computer and wiring go i have no idea. also would i get any gains from putting the stock cobra cams in? any diff. between the 96-98 to the99-02 cobra cams? what about motor mounts, are they the same as the 2v
  20. R

    4.6 2v rebuild what cam, porting?

    im rebuilding my 4.6 after it blew. the block is at the machine shop now getting bored .30 over. i was going to have my npi heads port matched to the pi intake manifold but i think i want to just get a set of pi heads. im going to run a 10:1 piston so w/ pi heads should be 11:1...is that to...
Top Bottom
Back
Forums
Menu