Search results

  1. B

    Super Charger Question!

    Gotcha
  2. B

    Super Charger Question!

    You never said if it was Powerdyne or not. I'm talking from experience. I've been moding since 1990. I had a Motorsport blower that I bought in 97 and at that time Powerdyne made it.
  3. B

    Super Charger Question!

    That blower will blow-up @ 10lbs!
  4. B

    Super Charger Question!

    Not the software, the blower itself. See if it says "manufactured by Powerdyne" on it.
  5. B

    Super Charger Question!

    Does Powerdyne still make Motorsports SC? If so, don't go more than 9lbs! You'll break the internal belt or burn out the bearings. If you want more boost go with a Vortech or one of the other guys.
  6. B

    It's Alive ( barely )

    Thank you, from my own experience!!
  7. B

    It's Alive ( barely )

    There are so many factors that could be causing this. He could have even installed the distributor off a tooth!
  8. B

    question to those who have a pypes x pipe

    They have the fitting on the x pipe for the tube, but it won't do you much good without the cats. If you're concerned about emissions get the high flow cats with the x-pipe. I have it on my Cobra. It you're not concerned about emissions get the pump delete bracket and do away with it completely.
  9. B

    Which Intake Manifold?

    That's what's on the car now. I came across the Typhoon and the price was right so I picked it up. I have a 70mm throttle body on Downs now. I have a 75mm with egr spacer that was given to me with the Typhoon. I'll put that on the Downs. Normally I would think 75mm would be too much but with...
  10. B

    Which Intake Manifold?

    I have two intakes. One is a ported lower gt40 with Downs Ford box upper. The other is a ported Typhoon. I'm wondering if it would make much of a difference between the two with my set-up. I have a 5.0 with stock bottom end, performer heads, cam, and Vortech running 12lbs. What do you think...
  11. B

    Heat Exchanger Install

    Has anyone installed a heat exchanger on a fox body... Was wondering how one can fit in front of the AC condenser... Is the hood latch support bar removed?
  12. B

    WOT display on PMS.

    I would appreciate any help I can get here. I picked up a used series 2 for my 90 stang. I am trying to set this up and calibrate everything. After plugging everything together, I turned the key to the on position to calibrate the TPS. The display reads Idle in the upper right hand corner, but...
View older results
Top Bottom
Back
Forums
Menu