Search results

  1. D

    i cant think

    yes as long as the belt is running off the back side of the serp it will be spinning in the correct direction. Dood, tons of hot rodders use the alt as the tensioner, i know you have seen it. http://www.coasthigh.com/Pulleys_Brackets/bracket_and_pulley_sets.htm see how one bolt for the alt can...
  2. D

    Cobra Caliper Fitment loose

    you shouldnt need to open up the clips at all. They are there to keep the pad resting against the bracket. The mach1 calipers will still have the pin that yall are talking about, i just installed some last weekend. If your calipers didnt come with the pin you need to find one, along with the...
  3. D

    Opinions on exterior of mustang

    dump it, then sump the gas tank. I think the colorful AN fittings take away from just the tank, and make notches look killer. I think it looks sweet when you can see a sump with fittings (maybe im weird). I think it looks pretty awesome as it sits though.
  4. D

    Has anyone ordered these

    Bah!! o well...so does anyone know where you can get some good SS rear brake lines? I havent found any yet except in complete 5 line kits but for like $150 dollars. MM doesnt even have them:eek:...at least on their website. I have just upgraded the fronts to mach1 brakes and SS lines, and...
  5. D

    Has anyone ordered these

    Rear brake line took a dump so i need to replace it. Has anyone ordered these ebay brake lines. http://cgi.ebay.com/ebaymotors/1994-1998-Mustang-Cobra-Stainless-Steel-Brake-Lines_W0QQitemZ180078924364QQihZ008QQcategoryZ33562QQrdZ1QQssPageNameZWD1VQQcmdZViewItem Anyone know of any good...
  6. D

    Mustang Mistaken for Honda?

    its funny a riced out car that could actually use a huge aluminum wing doesnt have one....... slacker
  7. D

    brake question

    i do believe that someone makes a kit to put cobra front calipers in the rear. they did it on Horsepower TV when they installed 14in 4 pistons on the front.... the car stopped from 60 in like 90 something feet
  8. D

    Mexican block questions

    i think there are only 2 ways to convert to roller lifters. The first is to buy retrofit linkbar lifters from crane they are like $400 without a cam. you can also use a reduced base diameter cam and tap the valley so you can bolt a stock spider down and use the stock dogbones.
  9. D

    Gangsta lean!

    wouldnt it be possible to correct the lean when you install new subframes? you could support the chassis on 4 points with the two fronts being level with each other and the back being level with each other? i would imagine that the weight if the car would bend "untwist" the car. Then if you...
  10. D

    Which lowering springs?

    H&R sports all the way
  11. D

    holy crap have u seen this?

    lol thats funny as hell....a dood just got arrested in my front today for trying to run from the cops. It was crazy cuz i live kinda in a rural town where not a lot happens. Im getting home from school, im about 100 yards from my drive way and some idiot in a chebbie 4x4 spins out, ends up in...
  12. D

    Rust Bullet or Por-15?

    get the eastwood rust encapsulator http://www.eastwoodco.com/jump.jsp?itemType=CATEGORY&itemID=374 i used it on my scout....all you have to do is get off any loose rust and paint it on...thats it
  13. D

    351w Intake Adapters Allow You To Use Your 302 Intake

    Hmmm.... they have adapters for 351c 4v heads to 351w block/intake.... that would make a cleavor build easier instead of having to buy a special intake
  14. D

    post pics of autodrags on fox coupe.

    lol that car looks brutal..... i have never seen a fox with a roots hanging out of it. That looks awesome
  15. D

    351 stroker guys

    dart says that you can take their blocks up to 460 inches :D
  16. D

    Anyone See This??? Aston Martin V12 Mustang?????

    i would do it...
  17. D

    gas cap not holding pressure?

    My 94 has never hissed, and i live in TX.... However my bros 90 does, but it doesnt have a stock gas cap....
  18. D

    So you installed an air horn did you

    I think its really funny (21) because i have wanted to do the same thing on my scout im working on. I was checking out some of the stuff on ebay and you can do it for cheaper than their kits. I didnt see what kind of Dbs theirs pump out but some on ebay hit 135db...your ear drum ruptures at 155:D
  19. D

    In today's age, 5.0s just aren't competitive...

    i gotta say it would be awesome if a new fox was fords next "Bold Move"..... it would be even more awesome if it had a pushrod engine. I mean GM can base their performance cars off a pushrod engine.....y cant ford do it. BTW Hissin you have a sick amount of posts lol:nice:
  20. D

    DVD Burning/copying software

    i use dvd shrink.....i really like it. There is basicly only 2 steps to copy a dvd and it works 90% of the time.
Top Bottom
Back
Forums
Menu