Search results

  1. SitDown

    Check out my future paint job....

    im all for original, but i have to agree i thought it was a cuda when i first saw it...
  2. SitDown

    SO the girlfriend is buying me a set of prostars for our anniversary!!!

    where are you guys getting this wheel size legality info from??? Are volkswagons illegal there too?
  3. SitDown

    Radiator dilema. What would you do?

    Was wondering the same thing...That really came out nice! What rad/fan combo is that?
  4. SitDown

    Is this 5 lug conversion kit good?

    I do agree... Previous to the sn95 setup i ran the lincoln 5lug rotors with m7 73mm calipers and M7 2 port master cyl. This was a very noticble improvement over stock. Then going to the SN95 setup using the lincoln MC, i didnt see any improvements in braking. If anything i thought the...
  5. SitDown

    Is this 5 lug conversion kit good?

    yes, u have a few option as for MC. Everything ull need to know is here: http://svo73mm.cjb.net/ Finding the sn95 stuff at a JY would be nice, but just browse around SN, corral, and other ford msg board classifieds. 99+PBR stuff would be better, but u want the 94-95 spindles as the newer...
  6. SitDown

    Is this 5 lug conversion kit good?

    no, they will not directly bolt up to the bullitts...i ran those rotors with my 98 cobra wheels. I needed a 1/4" spacer, could not run centercaps, and only had a few threads that my lugs were holding to. If your set on bullitt wheels id go with a sn95 front setup. shipping is ~$75, so at...
  7. SitDown

    Lemme tell you y'all a story about 275 40 17s & 65 mustangs...complete with many pics

    yes, wheels sticking outta fenders have no place on cars these days...you definatly have a more unique situation tho i never did got around to measuring mine, but im almost positive my nittos are atleast a 1/2" narrower than those BFGs. In addition i was gaining another 1/4" on each side from...
  8. SitDown

    How much you pay to have your car repaint?

    Id say that person was pretty accurate. Around me a "good" single color paintjob will run ~5k, and thats not including any body or prep work. But even this wont be considered a "show" quality paint job... Making friends with a reputable body guy is a good idea :D
  9. SitDown

    Msd 6al Box is dead!

    I dont usually start threads to say how well my iginition box worked today, but Ive had the same 6AL in my car for almost 7 years now...hows that :D im sure 90% of stangnet uses some MSD product, and ppl typically only post when something breaks.
  10. SitDown

    Msd 6al Box is dead!

    id definately 1st look into sending it back to be fixed...as another option ive always liked the mallory hyfire (Dig VI i think) Offers all that the MSD6AL does plus has a few addtl features like built in window switch and multi-step retard, and for the same price as the msd.
  11. SitDown

    Zirgo Electric fans

    Spal was my 1st choice, but the highest flow compact fan i could find from them was rated at 2360cfm...the dual 11" spal setup is nice, but another inch thicker and runs ~$250. I think they rate that too at 2700, but i believe their #s are pretty legitimate. My issue was less the cost or life...
  12. SitDown

    Zirgo Electric fans

    I Picked up the same (zirgo ZF16S) fan recently... Only $100 on ebay. Their numbers of 3300cfm are likely exaggerated, but if it flows as much as 2800 then its still a good deal. Real compact @ ~3.5" of depth.. There are a few good threads on corral and likely here. I did find a few ppl...
  13. SitDown

    What should I set plug gap? pertronix, edelbrock heads, stock c.r.

    I ran ~.45 with a mild N/A HCI combo...thats with Edel alum 6037s using autolite 3924s. Used 3923s when i was more N20 focused... I think the general NA consensus is just a bit over .50
  14. SitDown

    275 40 17 on 65/6 mustang...I'm willing to listen...

    ill try to get out there this week and get some #s. I have the same 275 DR mounted on both 17x8 and 17x9s. Although, i do know that the BFG DRs are wider than my Nitto DRs...
  15. SitDown

    8.8" vs 9"

    C clip elims do have a bad rep, but mostly result of a half ass installs. Ive run them on my street car for several years now without any leaks. Weld on housing ends are also an option... i run a 9" in my 65, so i dont hold much bias, just think the 8.8s can hold plenty and dont eat up as...
  16. SitDown

    8.8" vs 9"

    a stock 8.8 wont hold up long to slicks, ive even destoryed a carrier and axle on a 17" drag radial...but mildly upgraded, the 8.8 can be plenty strong... A simple street strip setup of 31 spline axles (w/ or w/o c clip elims), decent carrier, and girlde will leave you confident that you'll...
  17. SitDown

    Will tranny is a t45. Will it fit in a 67.

    t45s are garbage...like mentioned above, if it really came outta a 93 then its a t5
  18. SitDown

    I need a good source for 03' Mach 1 rims.

    im not a big fan of the repro wheels... But if your lookign for frpp wheels, diversified has the best pricing. Theyve been around for some time and ive bought a couple sets thru them, their new site is buyfordracing.com...i think the M1 wheels are 119ea as for used, saw a few mint sets go...
  19. SitDown

    BIGGEST radiator size

    On my 65, its ~27.5" between frame rails. Battery is in the trunk so i have no tray to interfere and a couple things had to be relocated, but the biggest radiator i can get to drop between the frame rails is a 26" wide.
  20. SitDown

    Opinions on 65-66 painless harness

    Heres the writeup/instr for this kit... http://static.summitracing.com/global/images/instructions/prf-20120.pdf i too would be curious to hear form someone who actually owned and intalled it.
Top Bottom
Back
Forums
Menu