Search results

  1. L

    All Ford Car show

    This saturday 10 - 9 Sanderson Ford on Grand Ave is having its Ford ONLY car show 7 am to 2 pm. Also the weekly car show at K-mart on Bell has now move to 89 ave north of the 101 loop in the Safeway parking lot. There was 150+ cars there this past weekend. :flag:
  2. L

    Car show tonight

    There is going to be a car show tonight at 23 ave and Bell road north side by Sanannagins bar and grill across from Bell fFrd. This is a benifit show from Bell Ford from what I hear.
  3. L

    headers for 65 with Mustang II front end

    I have power rack and power disc fronts. purchased it from custom rod. The concern I have is the steering bar from the steering colom to the rack is close where the headers are.
  4. L

    headers for 65 with Mustang II front end

    Do you have a Mustang II front end with power rack.
  5. L

    headers for 65 with Mustang II front end

    I have a 65 coupe which I put a mustang II tubular a-arm system in. Question is, I want to put headers on my 289 and would like to know if any one has put headers in with this suspension system, and if so what did you purchase and where and cost. Thanks for any help this is the last step of...
  6. L

    Headers for 65 with Mustang 2 front suspension

    I have a 65 coupe which I put a mustang II tubular a-arm system in. Question is, I want to put headers on my 289 and would like to know if any one has put headers in with this suspension system, and if so what did you purchase and where and cost. Thanks for any help this is the last step of...
  7. L

    Painting Engine Bay

    I'm restoing my 65 stang, to do it right it is a lot of work, it's not expensive just TIME and effort. I removed everything, engine, trans, radiator, battery, steering column, steering box, all steering linkage, brake lines, master cylinder, heater hoses, all down to the metal and took all front...
  8. L

    Rear quarter panel assembly

    I purchased quarter panel skin from CJ Mustangs. Here is the problem, the area above the wheel well has a wave in it and has been banged out, there is an area of about 3"X4" behind lowwer rear well that is cancer and the rear of the panel by the tail lights from top to bottom is pitted and...
  9. L

    Rear quarter panel assembly

    :bang: Im going to remove the left rear quarter panel on my 65 coupe. The panel has some cancer and a shoddy attempt of a dent fix from last owner. The metal is pitted and waved that I rather replace then bondo. Any words of wisdom before I start to drill out the spot welds and melt out the...
  10. L

    Mustang II conversion

    I'm putting a kit on my 65 coupe now from Rod & Custom motorsports. It has everthing you need from power disk brakes to power rack all depends on what you want to spend. It welds up nice to your frame however you need to get the oil pan that does not come with the kit since the main cross bar is...
  11. L

    newbie saying Hi

    I'm in the process of the same switching my 65 from a 6 to a V8. Be prepared it is alot of work but fun if you like doing wrenching. I went with a custom rod front end and power disc brakes with power rack. rcmotosports.net You need to weld in the cross member to the frame then everything else...
  12. L

    Time for a rebuild

    Mike Phoenix engine rebuild 7th ave south of DeerValley cost $900 to $1000 depending on what you want. To answer your question on the c-4 the bell housing and plate wont match up but you could use the c-4 when you get the bell housing/plate fix.
  13. L

    please explain to me the big deal about a six cylinder to larger engine swap?

    I'm in the process now of swaping a 6 for a V8. I picked up a stright no rust arizona 6 and i'm putting in a V8/289. Lucky for me I found a donor and got the engine, c4, 8" rearend and springs. I've been busting my hump for two months to get it down to a shell stripping it. If you are going to...
  14. L

    cowl vent

    I have a 65 coupe that the cowl vent is one piece with the body that I am going to repaint teh inside of the vent. ? is 1.how do I get all the junk out of the vent 2.how would I paint it Thanks for any tips I am in the process of stripping the out side vent fins the bottom of the cowl vent...
  15. L

    Hi to everyone

    T HI, I picked up a 65/200 and am in thh process of a swap 289hipo, C4 trans and a 9" rearend with new springs. Now I am in the process of adding a hub to hub front kit. You will love this forum these people on here are good peps and will give you all the info you need. They will save you...
  16. L

    Mustang II conversion and long tube headers?

  17. L

    what to look for when buying a classic ?

    I just picked up a 65 6/200 for $3.500 in Phoenix. I knew going into it that I was going to replace the front end, engine, and rear. My plan was to get one with no rust (the magnet test) and the interior in good shape. Then spend around $4.000 grand to get the drive train like new. I would not...
  18. L

    Engine switch 289

    I picked up the engine,trans, rearend and rear springs from the totaled stang, The front end is stock and org so Iknow I would have to replace with a kit. Also the front brakes will be upgraded to disks with a add on kit. I have my plan just want to pick your brains and make sure I'm not...
  19. L

    Engine switch 289

    I just got a 65 mustang with a 6/200 and I'm replacing it with a 289 hipo. I have a C4 tranny that came with the 200. Question is, what would be the do's and don'ts and whould it match up to the fly wheel. The 289 is complete, it was taken out of 67 stang that was totaled so I have all the...
Top Bottom
Back
Forums
Menu