Search results

  1. T

    best way to tune

    i don't know if your area prices are cheaper than mine but it can easily get to a grand in a hurry on the dyno. my area is 100 for 3 pulls,they weld a bung for the o2 sensor start tweaking the fuel pressure and what ever else. then 300 for the chip and then how ever long it takes the guy to tune...
  2. T

    Possible Afr Issue

    well i found my problem the injectors are 30 lbbut at 60 psi, stay away from ebay i keep learning the hardway. the axxhole said they were the same as the red top frpp. they are rated 25 lb at 43 psi. i hope this helps someone. buy a afr guage. it definatly saved my motor, best 200 bucks ispent...
  3. T

    Possible Afr Issue

    please help, i'm supposed to race this weekend!!
  4. T

    Possible Afr Issue

    here is a new chapter to this. i checked my fuel pressure and i am at 41 so i turned it to 43, with the vac line off i was ideling at 14.5 and gave it gas and it stayed around that mark. then when i put the vac line on it leans out to about 16 when i am giving it gas . know i am wondering if i...
  5. T

    Msd 6al2 Box Installation

    i belive it is a green wire on the rad overflow tank cap that i used for switching a relay.
  6. T

    Possible Afr Issue

    i just installed my wideband and when i start the car i am lean at about 16-17.5 but when i give it a bump with the throttle it drops to about 14-15 at idle. if i don't burp the throttle it will idle lean. i have a custom chip burnt on the dyno. i had 19 lb injectors when the chip was burnt. i...
  7. T

    How High Can I Rev My Setup

    i have a simalar set up,gt40 e303 1.72 rr's and mine hits the "wall'' at 6100. no point going past it. i shift at about 5900
  8. T

    Nitrous plugs on the road

    just use a good set of champions and close the gap a bit and you will be good. i have been running a 125 zex shot like this and no issues, i can't remember what i closed them too but i have about 40 passes on them and they still look perfect.car runs perfect.unless your running a big shot kit...
  9. T

    24lb injectors TFS Manifold Fitment Issues

    what about a phenolic spacer??
  10. T

    Might sell the '86 for an '04 Cobra

    my buddy has a terminater and it is stupid fast and corners well and feels great, but i love my fox. i will have a new 5.0 or gt500 in a couple of years but i have to keep my fox. i don't know how many people come over and sit in it just cause they miss thiers. the way i look at it i'll never...
  11. T

    Changed back to stock rockers, now check out this crazy noise!

    good to hear,now get the rockers back in there !!!!:nice:
  12. T

    Changed back to stock rockers, now check out this crazy noise!

    just a shot in the dark but the clicking sound would either be heat or pressure, i wonder if somehow the fuel is being put into the cylinder after shut down and the fuel is pressurizing the cylinder and the clicking is from the pressure working its way out.???? or could you be out of time and it...
  13. T

    Changed back to stock rockers, now check out this crazy noise!

    i don't know if this will help but when i put the 1.7's on my gt40's they would hit the oil baffle on the passenger side. it was just enough that when you forst started it it was quiet but i guess when it got oil soaked you could hear it if you have a cam it could be the springs as well.. but...
  14. T

    Art Carr AOD setup

    still have the tranny
  15. T

    TCI AOD 433100 Converter

    do you stil have??
  16. T

    Fox Mustang Parts - Edge Racing Torque Converter and more

    do you still have the converter??
  17. T

    hey manitoba here

    i had no idea there was a canada section. were are all you from? and thanx stangnet for not forgetting us canadians. we need sympathy from other canadians cause we all know how much more expensive our hobby is up here!!
  18. T

    fender roll with 275??

    sorry i can't get pics to come up,they say too large. i'm using my iphone. anyway i say screw it and i'll roll em anyway.