Search results

  1. Srpera

    Spec Stage 2 and Peddle Pressure

    I need me a forged bottom end...
  2. Srpera

    11" Clutch in a 00GT T45???

    The cheapest I can find is around $200. Part number is M-7060-C46. Let's find this puppy. Comes with 11" flywheel, clutch disc, pressure plate, and bearing. That is a cheap and worthwhile upgrade if you have an 8-bolt flywheel.
  3. Srpera

    11" Clutch in a 00GT T45???

    Find me a link BCB00GT! How can you beat that deal! A billet steel flywheel is $250 alone. I know the FRPP flywheel is not billet, but how can you beat that price for all new upgraded components...
  4. Srpera

    Spec Stage 2 and Peddle Pressure

    I don't think the stock quadrant self-adjuster works well with aftermarket clutches (or even with stock clutch). You need a quadrant and firewall adjuster, and reuse the stock cable. The quadrant eliminates the self-adjusting one and makes the clutch more consistent. The firewall adjuster is...
  5. Srpera

    Spec Stage 2 and Peddle Pressure

    I agree. Can't beat the bang for the buck. I think a firewall adjuster and quadrant are needed. You cannot depend on the stock plastic self-adjuster. Put the car on a lift and check for throwout bearing clearance and adjust using the firewall adjuster. I am going to have mine readjusted...
  6. Srpera

    11" Clutch in a 00GT T45???

    Nice, here comes an 11" 8-bolt flywheel and 11" clutch kit. Now to decide which brand to go with.
  7. Srpera

    Spec Stage 2 and Peddle Pressure

    That definately sounds like an install issue. Fizanda, Spec and stock flywheels are using the same geometry. Keep your flywheel (if it is not damaged) and install another clutch kit (pressure plate/clutch disc/ throwout bearing). Make sure it gets adjusted correctly using a firewall adjuster...
  8. Srpera

    11" Clutch in a 00GT T45???

    A friend of mine owns a 99GT. When he supercharged his car, the speed shop installed a Cobra clutch in his car. I thought the Cobras has an 11" clutch. That lead me to think about installing an 11" in my 00GT with a T45 5-speed. If the Cobra clutch went into his 99GT and it was truly an 11"...
  9. Srpera

    Spec Stage 2 and Peddle Pressure

    I do notice that the PEDAL is getting higher already. The stage 2 clutch disc is very thin compared to a friends stage 3+.
  10. Srpera

    Spec Stage 2 and Peddle Pressure

    Thanks for the catch "PEDAL" doh! I installed the silver Steeda quadrant and used the notch closest to the firewall.
  11. Srpera

    Spec Stage 2 and Peddle Pressure

    I installed a SPEC Stage 2 Clutch Kit on my 00GT. The pedal pressure is a lot more than stock (not user friendly in traffic at all). How is your SPEC Stage 2 pedal pressure? I tried my friends SPEC Stage 3+ clutch in his 03 Cobra and it felt very easy to push (just like stock). When I changed my...
  12. Srpera

    Let's Play... What Did She Run???

    Good guesses. She ran a 12.19 @ 115.59. Need to shave .2 to get her in the 11's.
  13. Srpera

    Let's Play... What Did She Run???

    Went to the track tonight. My best run was the first run of the night. Had the car dyno tuned yesterday to compensate for the new mods since the original tune. I used an old pair of ET Streets with countless passes on them. What would you guess she ran? You can see a description of the car...
  14. Srpera

    New Pics of the 00GT...

    Took a couple of pics of the 00GT since changes were made (including the Procharger and wheels). Engine pics coming soon after the Anderson Power Pipe install tomorrow. Click on my sig to check her out.
  15. Srpera

    Center Caps for Bullitt Wheels??

    I need to find some center caps for my 18x9/18x10 wheels. The centercaps are 2.5". Other than ebay, I can't find any reasonable priced center caps. I know there was a problem with some center caps not fitting properly (they push in too far and are not flush with wheel), but I don't know what...
  16. Srpera

    18x10 Wheels and Tire Sizes...

    I think I will go with the 285/35/18s for the rear. I like the bulge of a rear tire, but 295/35/18 is 16.1" in diameter (compared to the 29.9 of the 285). Any bigger, then the tire looks too large in diameter. I don't want to go less than 25.7 diameter for the rear (ex. 315/30/18 = 25.5...
  17. Srpera

    18x10 Wheels and Tire Sizes...

    I want to know what size tires you chose to put on your 18x10 wheels. The 285/35/18 tires are meant for a 10" wheel and are only .2" larger in diameter than stock, but much wider. Pictures would be nice too if you got em'
  18. Srpera

    Shorter Struts and Shocks???

    Do they make shorter struts and shocks for the 99-04 GTs? I thought I read somewhere that people were using fox body struts and shocks on lowered 99-04 GTs. Are the fox body struts a shorter strut than the 99-04 GTs?
  19. Srpera

    Mach 460 Head Unit Wiring???

    The fourth pin from the bottom is not used (at least, my plug does not have a wire in that spot). The bottom pin has a blue wire going into it.
  20. Srpera

    Mach 460 Head Unit Wiring???

    How about in layman's terms? :) What is the function of the 7 wires going to the 8-pin plug? The plug that plugs into here has seven wires. I need to match the wire color with its function:
Top Bottom
Back
Forums
Menu