Search results

  1. Icepick

    Idle Surge only on deceleration?? Any ideas?

    A new one is $60 at the dealer, it'd get my vote that is what you need.
  2. Icepick

    Idle Surge only on deceleration?? Any ideas?

    I just had similiar issues and my throttle position sensor was showing 3 volts at idle instead of .95, i replaced it and it's fine now.
  3. Icepick

    Tailgaters should be shot; missed 4th went into 2nd.

    I dont know how you managed to hit second instead of straight down into fourth but good luck with not having any damage.
  4. Icepick

    fors are gay

    Brand loyalty is cool, but this fella needs some help :)
  5. Icepick

    fors are gay

    Some Mopars are ok, but no reason to come here bashing Fords lol
  6. Icepick

    Anyone sell a 5spd. conversion kit?

    Sure there's conversion kits out there. I got mine from http://www.daves-mustang-parts.com/ Great guys, got me my stuff in a hurry. I went with a brand new T5Z for the tranny.
  7. Icepick

    Hot starting problems... FACTORY headers!

    Same thing was happening with my starter a couple of months back. I bought a pretty good replacement (performance parts i think or something like that) at Discount/advance auto parts. Took 40 mins to install and it turns over SOOOOOOOOOOO much better now. I just noticed you already did a 3g...
  8. Icepick

    ?s for Edelbrock Performer head users.

    Mine runs strong, but it hasnt been on a dyno yet and i doubt it is more than 280rwhp
  9. Icepick

    Is the convertible tack strip necessary?

    Wow, much respect to you for doing your own top! They had this little cuban guy wriggling around in my car to do it. No way i could fit my 200 lb butt back there to do all that. ugghhhh
  10. Icepick

    High TPS voltage caused crummy idle

    I was having poor idle problems, especially with A/C on, give a rev in neutral and the car would almost stall unless as the rpms dropped back down. I tapped into the TPS and checked the voltage, it was 3.5, supposed to be no more than 1 at idle. I bought a new one and problem solved, if i rev in...
  11. Icepick

    OK, the diablo guys an idiot...please help me with tune

    Those times you're running are very close to what mine ran stock except for 4.10's about 8 months ago. Now she's a very low 13 sec car :) Keep modding and you'll be happy. Biggest improvement to date was switch to Stick and the heads. :nice:
  12. Icepick

    Bad idle Unplugging PCV Valve helps it, any ideas what's wrong?

    Yes i replaced the grommet, pcv valve and crankcase breather filter. Timing is good, Fuel pressure i have not checked, I also did not spray on the intake gasket, i am going on the assumption that when the shop installed it about 6 months ago that they did a good job (since i think that, that's...
  13. Icepick

    Bad idle Unplugging PCV Valve helps it, any ideas what's wrong?

    ok, i sprayed some carb cleaner on all the engine compartment vacuum points that i could find, they all seemed fine, only time the engine revved was when i pulled on and spayed into it. It might very well be a leak elsewhere, while pumping the brakes if i rev the engine with the engine on the...
  14. Icepick

    Bad idle Unplugging PCV Valve helps it, any ideas what's wrong?

    ah, i didnt even know that was down in there lol, i guess back to the dealer i will go BTW: i replaced the iac, it idles pretty good at 800 rpm, BUT: when you have the a/c on and give a little rev in neutral then release the gas at say 2k rpms, the engine idles down and almost...
  15. Icepick

    Bad idle Unplugging PCV Valve helps it, any ideas what's wrong?

    I just went and bought a new IAC motor, i'm resetting the computer now to do the idle adjust procedure, i did check for vacuum leaks, but i don't know how thorough of a job i did, i did find one, but i already plugged that with no difference.
  16. Icepick

    Bad idle Unplugging PCV Valve helps it, any ideas what's wrong?

    I have a surging idle, at 750-800 rpms the car surges up and down by a couple hundred rpm, adjust the idle up to 1000 rpms and it pretty much covers up the surge. I unplugged the pcv valve and the surge went away, replaced the pcv valve and plugged it back in surge is back. What parts are...
  17. Icepick

    Pro Chamber, cheaper than H-Pipe?

    I found mine for 219.99 plus free shipping :) As soon as mine is in the mail at the end of the week i'll post the link to their site. There's no way i'm going to post a link to them until i'm sure they're legit.
  18. Icepick

    Installed MAC Pro Chamber & Now I have problems

    I bent my 02 sensor a little bit when i put mine back cuz there wasn't much room on the one side and wrench bent it in a little, luckily mine runs fine except for a what i believe is a vacum leak causing a surging idle if i set the rpms too low. Good luck with the new 02 sensors.
  19. Icepick

    Installed MAC Pro Chamber & Now I have problems

    I believe one of the standard things to do on install of a midpipe that is cat-less is to disconnect the battery for a half hour so the computer can reset itself. Did you do this?
  20. Icepick

    h pipe to an x pipe

    nah, vice versa, x makes more HP up high but loses Tq, i want to get a Prochamber myself and have the best of both worlds, maybe next month.
Top Bottom
Back
Forums
Menu