Search results

  1. will1992

    4 rims and tires 17x9 cobra r's

    4 rims with 2 tires tires 17x9 cobra r's for sale 4 lug 17x9 silver afs cobra r's with 4 275 nitto nt555's.rims in very good condition.two tires in good condition. northern california. as is. slight curb rash. $550.00 willing to ship. buyer pays shipping. prefer cashiers check
  2. will1992

    Is this an exhaust leak? Video inside...

    or it could be the starter motor going bad
  3. will1992

    cam swap question

    i think you will have enough space with the condenser in, but you have to drain and remove the radiator. you can just move the ac lines out of the way thats how i did mine.
  4. will1992

    Is this an exhaust leak? Video inside...

    could be a throw out bearing. does it make noise with the clutch pushed in while revving the motor?
  5. will1992

    trying to lower my pony.. help plz

    i had the eibach pro kit on my '92 convertible with 275s front and back. my car was lowered about an inch. stock shocks and struts. nice stance, mild rubbing on rear quarters on hard turns. ride is stiffer then stock springs. i didnt like them, so i took them off, too stiff for my vert. the top...
  6. will1992

    5.0 running rich pulled codes 21, 31, 44, 22, 66

    ill switch the o2s up and use some rtv thanks. i need to buy some though what kind should i get?
  7. will1992

    5.0 running rich pulled codes 21, 31, 44, 22, 66

    i was going to do that today but im procrastinating. the 4 cat exhaust is a pain to get off and on and seems like it never seals even when bolted down evenly. i looked at the collectors on my offroad h-pipe and they were leaking. it was a small leak, but you could see where it was black from the...
  8. will1992

    5.0 running rich pulled codes 21, 31, 44, 22, 66

    alrite thanks
  9. will1992

    '93 GT Serp Belt Help Please!

    it happens :)
  10. will1992

    5.0 running rich pulled codes 21, 31, 44, 22, 66

    i checked it hot and it was at 4.4 ohms sooo... that means it is working the way its supposed to be by going further down in resistance the hotter it gets? i just reset the idle with the backing screw like in the surging idle thread and she idles better less shaking and ran the koer codes engine...
  11. will1992

    5.0 running rich pulled codes 21, 31, 44, 22, 66

    can u make anything out of my maf results a few posts up? sensor is prob fubar will change maf and ect soon *both ect sensors i had on there were fords* how bad will this(ect) sensor affect my car? should i measure it at warmer temps? because i didnt do that thank you
  12. will1992

    5.0 running rich pulled codes 21, 31, 44, 22, 66

    maybe the snsor is dirty can i clean it maybe sandpaper it where it goes into the metal coolant tube
  13. will1992

    '93 GT Serp Belt Help Please!

    try taking the belt off and routing it different ways, i dont know try wrapping it around the crank first then try routing it to the left or to the right around the water pump, there are different way to route but its hard to explain. look at the diagram above and imagine looking down at your...
  14. will1992

    HELP!! Pilot Bearing Problem !

    stick your finger in the pilot bearing and feel the backside of the casing facing the crank it has two indents on each side for the tabs on the jaws of the puller
  15. will1992

    '93 GT Serp Belt Help Please!

    ^ yup i had too "guess" what size belt i needed for no a/c (not all cars are the same) wrap a piece of string around the pulleys while turning the tensioner with a wrench and mark it with a finger then measure it and this is the belt length needed. what i did is i went to a auto parts store and...
  16. will1992

    The thread of the nicest FOXES!

    wow i remember seeing your red and black coupe in a magazine either 50mustangs or musclemustangs or prob both that car is amazing! and the 79ish t-top coupe is one notch above that car is beutiful. nice job
  17. will1992

    5.0 running rich pulled codes 21, 31, 44, 22, 66

    mustangsl5, did you fix your starting problems by buying a new ect sensor? my car usually cranks for a while and tried the iab test where you hold the throttle half way but still takes about 5-10 secs to actually fire up. how did you figure out your ect was bad? * mustang5l5 *
  18. will1992

    5.0 running rich pulled codes 21, 31, 44, 22, 66

    my car has a hard start prob. i pulled the codes with the engine cold while it was running. i checked the sensor when it was cold too and its perfect, im going to replace it anyway to make sure.
  19. will1992

    how to diagnose knock

    man that sucks, my cousins car started doing that, and one day he ended up replacing it with a junkyard engine, it blew
  20. will1992

    5.0 running rich pulled codes 21, 31, 44, 22, 66

    anyways today i ended up switching the lines back because i was wrong and tested the maf. pins a&b while running get 14.9 v pins c&d is at idle .98 v pin d engine off was at 3.84 ohms- bad? pin c engine off was at .60 ohms pin d disconnected was at 100.5 ohms pin c disconnected was...
Top Bottom
Back
Forums
Menu