Search results

  1. squeeeg

    how to tear down and rebuild a trac loc!

    I can't believe that nobody has posted this site yet. This just walks you all the way through the rear end. There is a section on the traction lock http://www.angelfire.com/theforce/5ohcpa/cpa5ohtech001.htm
  2. squeeeg

    converting gt to lx

    I think the consensus on this is it isn't worth it. You have to get new front and rear bumpers and take off all the side skirts obviously. After you do this you have to drill out all the rivits that hold on the brackets for the side skirts and then weld them up and paint. That is it if you...
  3. squeeeg

    Vaccum Tree Delete?

    subscribing That is a good idea.
  4. squeeeg

    Front Fenders--80-90 and 91-93 or 87-90 and 91-93

    It is actually 79-90 and 91-93 but youare close enough. They are the same until the pony's went on the car.
  5. squeeeg

    where can you buy NEW emergency brake cables?

    50 resto has them as well. They were the only people that I could find that sold the Y cable that is up front.
  6. squeeeg

    Just talked to SUMMIT. Need cam help

    Second this. It is good for lower power applications. The alphabet cams are getting outdated. They were good when they were first made but that was a while ago.
  7. squeeeg

    Another speedo gear hunt

    You need the white 23 tooth gear to get it close. If you want to get it right then you are going to have to change the drive gear inside the tranny to a 6 or 7 tooth and get the correct ratio gear.
  8. squeeeg

    Speedo gear

    Here is the T5 service manual. This may help you out. http://www.tremec.com/English/media/pdfs_autogen/T-5_Service_Manual.pdf You have to use the jeep part because ford doesn't make a gear with a higher ratio then 21 teeth. The jeep part works just fine and is decently accurate for most...
  9. squeeeg

    Speedo gear

    In 1990 they changed the drive gear inside the tranny from 7 tooth to 8 tooth. This is the reason for all the confision with adding gears to your car. You have a red 21 tooth gear in your car with t5 tranny and 3.73 gears: if you tranny was made 1983-89 then you have the correct gear if...
  10. squeeeg

    Speedo gear

    You need the white 23 tooth gear. You can get it at your local Jeep dealer.
  11. squeeeg

    T5 question

    The t5z is a much better tranny. It can handle a little bit of power.
  12. squeeeg

    Has anybody used mustang depot (ebay) rotating assemblies

    Are you talking about TMD or ADPerformance
  13. squeeeg

    Help, pictures of shreded cable, what is it?

    Correct
  14. squeeeg

    T5 question

    The stock t5 is about worthless. The upgraded one(90-93) is only rated for 300 ft lbs of torque which the stock engine has. It won't last long but it all depends on how you drive it. Some people have them but most have to upgrade.
  15. squeeeg

    How much would the stock cam hold me back?

    A cam change isn't as hard as you think it is. You are right there with the rest of your mods anyway. Like everybody else said you won't gain anything by changing out the stock cam.
  16. squeeeg

    Just installed 4.10s what speedo gear do I need?

    You absolute best bet to be most accurate would be the 6 tooth drive gear and the 20 tooth speedo gear. The most common and close to accurate would be 7 tooth drive gear and 23 tooth speedo gear. Either way you have to change the drive gear but that is the way to go.
  17. squeeeg

    Who else is getting the wrath of the snow gods???

    They are calling for at least a week of snow showers without much of a break. Here at school I get the lake effect snows off of lake michigan. It sucks I want to move to florida.
  18. squeeeg

    sunroof delete question

    I would say no way. Don't do it. You would have to match the curve of the roof. If you don't like it so much why did you buy one with a sunroof. I would love to have a sunroof in my car, I just couldn't find one.
  19. squeeeg

    Any old MW Stangnetter's still around?

    I have been around here forever but I was never part of "The Group"
  20. squeeeg

    What size belt with no smog or ac?

    I used the FMS kit. No smog and no ac and it was a 70.5" belt. It was a real tight fit at first but the 71" belt stretched and started rubbing after a couple days.
Top Bottom
Back
Forums
Menu