Search results

  1. S

    CHEAP STANG OR A CROOK

    Crook all the way
  2. S

    t5 swap driveshaft length/vibration question

    I had the SAME problem. I ended up putting a few thick washers between the tranny mount and the mount itself. I don't think it was an angle issue just the mount needed a better foundation and the problem went away.
  3. S

    67 hood: repro vs original tooling?

    Buck up with no regrets. As always, you get what you pay for. I bougth a repo hood and yes it fits great and looks fine but it is of lighter gauge metal and if it was ever in a hail storm more than likely the hood would show the most damage. Believe me I have seen it happen to repo stuff...
  4. S

    Need help with headers

    I have FPA headers http://www.fordpowertrain.com/ nice but pricey due to my GT40P heads. They have a header that fits too. Go with Hooker shorties if you can so that you wont have any problems later when you want to to a R&P swap.
  5. S

    What is this car worth?

    $8-$9000
  6. S

    possible colapsed lifter?

    I had this problem on an old 289 that I fixed by tightening up on the rocker arm and loosing it back up while the engine was running.
  7. S

    JMC Hydraulic clutch question

    jmc No problem here. Just remember to follow the directions to the tee when bleeding the system.
  8. S

    67 FB 351w, which coil springs to use?

    The 351 is heavier but I went with standard 289 springs and the ride is fine.
  9. S

    Denver/Colorado Springs/Front Range body shops

    Lincoln Pro Mig 175 email me at [email protected]
  10. S

    Denver/Colorado Springs/Front Range body shops

    STSFCTN67..... Are you still working on this? How are you finding it going so far? Have you done this repair before? I bought a mig, replacement front pans, and cut out the bad spot on the passenger side so far. I have never used a mig but from what everyone has told me it is not hard to...
  11. S

    Rebel mustang?

    Rebel Hag REBEL IS THE GUY THAT TYPES EVERYTHING IN CAPS AND FROM MY EXPERIENCE HE IS AN A$$WIPE. I received a defective product from Rebel and HE said for me to send it back and HE would check it out. Once REBEL oh GREAT ONE received the package HE immeditatly sent it back "return to...
  12. S

    Denver/Colorado Springs/Front Range body shops

    I have been directed to 3G as well for a body shop. Have you looked into doing the pans yourself? I am changing the front pans in my 67. The cash I saved will more than pay for the mig welder.
  13. S

    Header Headaches!

    I bought the Ford Powertrain headers for my 351 with powersteering and a drop bracket. Go with shorty headers so that you dont have issues later down the road when you want to intall a power steering rack.
  14. S

    Mushy power brakes, Arizona Emissions

    The Bendix unit has tabs that are bent down to squeeze both halves of the unit together. I do not know what makes them different. My only guess is that disc brakes require more boost? :shrug: The first time I did the swap and used the correct booster the brakes were much more sensitive.
  15. S

    Mushy power brakes, Arizona Emissions

    I have the same booster thus the same problem. You need to purchase the unit without the band. I am going with the unit from Autozone. Check out their website and you will see the 2 models avialable. Anyone interred in a booster for your drum brakes??
  16. S

    Thoughts on this flywheel for T5 swap?

    I got my current flywheel from Summit after making many mistakes. I can't remember exactly but I think you need a 164 tooth flywheel, with the correct imbalance for your engine to fit the late model T5 bellhousing.
  17. S

    Mushy power brakes, Arizona Emissions

    What does your booster look like, if it has the metal band around it, then you have the wrong booster for disc brakes.
  18. S

    JMC Hydraulic Clutch and Power Brakes

    I have done the manual to power and have done the JMC swap as well. I went with the origianal OEM booster but I did have to change the brake pedal out. There are 2 types of brake boosters make sure you get the unit for power disc brakes and not power drums (clamp style). Make sure you include...
  19. S

    Are roller valve trains noisy?

    Same here, my roller rockers are noisy too.
  20. S

    '68 dual mc work w/ Granada disc swap

    I used the origianal MC with a proportioning valve for the rear.
Top Bottom
Back
Forums
Menu