Search results

  1. T

    66 swerves BAD under heavy throttle!

    I should have added I had my fronts arrowed to 17x7, cant recall the tire size I went with off hand.
  2. T

    66 swerves BAD under heavy throttle!

    I had 245/45 17's on all 4 corners of my 65 and it was a handfull! I went to a narrower tire in front and the problem is gone, it made an amazing difference.
  3. T

    rack and pinion

    If its a flamaing river rack, run the other way as fast as you can.
  4. T

    Thoughts on the new CPP front suspension?

    Im curious too! On the verge of purchasing the setup but outside of this thread theres not much information out there regarding this suspension in mustangs.
  5. T

    Ebay: Rear Disc Brake Kit

    I contacted the seller, those are cadillac seville calipers in the ebay kit.
  6. T

    69 Dynacorn body...

    A boss 429 clone with a modern suspension and a 5.4L blown shelby motor would be real nice.
  7. T

    Inner fenders

    I had considered finding a set of junkyard plastic inner fenders and cutting them to fit. I think done right it would look good, cut down on road noise and eliminate the risk of fender damage from stones thrown up from the tires.
  8. T

    coupe to convertible conversion?

    Mustangs plus also used to sell a retractable hardtop kit, as well as the ronster. The ronster didnt have a top, just a fiberglass filler to cover the rear seat area. Ive never seen either anywhere but in their catalog pics
  9. T

    17x8 wheels up front??

    Im running Stock 2001 17x8's with 245/45's all the way around, no spacers. The front of the drivers fender rubs when backing out of my driveway, but thats it! I have wilwood discs in front ( 1/2") more track width, and a '67 9" rear(1" wider track each side). I did need to grind the uca's for...
  10. T

    5.0 throttle plate in 66 coupe

    It should pull relatively close to 90 degrees open. Do you have the cable attached to the throttle body correctly? Also on 65-66 cars you cannot use the EGR block because the air intake will contact the shock tower. Since the EGR block houses the cable mount, I ended up making my own bracket for...
  11. T

    vinyl tops

    MY wife and I installed our vinyl top, its not too bad a job. Patience and sunshine are a must.
  12. T

    Out of all the rack kits, does anyone make one right?

    If youve got enough caster the roller idler will be no problem, with stock alignment specs it may not return to center as well.
  13. T

    Out of all the rack kits, does anyone make one right?

    From what I understand TCP and RRS are as close to "right" as you'll get , but both are pretty expensive too. Go with a randalls rack or a steeroids, and if you get a big enough tire on it you wont have to worry about the rack limiting turning radius..LOL
  14. T

    Maier springs and ride quality

    Thats probably why they call them race springs. Im glad you posted this, I was curious as to how they'd ride.
  15. T

    Building a 331: periodic update

    You lost me, my Scat/eagle/SRP 331 is balanced to a 50oz late model balancer and flywheel. I was told specifically that it was built externally balanced and if you wanted to use 28 oz or 50 oz it had to be rebalanced, however I was also told it takes alot less material removal for 28 oz compared...
  16. T

    Question about Mustang Depot

    I believe Jay owns Mustang Depot, I think thats as high as you can go on the ladder.
  17. T

    Building a 331: periodic update

    It has to come apart!! All of the rotating assembly, crank, rods ,pistons rings, bearings, flywheel and harmonic balancer need to go to the shop thats balancing it. Without balancing that motor will shake itself apart and the best harmonic balancer on earth isnt going to help it.
  18. T

    Anybody have an Edelbrock AVS Carb?

    Theres nothing wrong with the edelbrock carbs, just alot of misunderstanding regarding them, kinda like the reputation of the Rochester quadrajet..hated by many who dont understand it but when tuned right its an absolutely awesome carburetor. The AVS has been around for 35 years and has worked...
  19. T

    Installing 5.0 roller in 65 need some help

    If you want a mechanical fuel pump you need the old timing cover.
  20. T

    mustangsteve's 13" cobra brake lit is out and cheap

    Thats ALOT beefier caliper mounting than my Wilwoods have. Im using other products of Steves, if anything theyre overbuilt. Id have no problem at all using these brakes.
Top Bottom
Back
Forums
Menu