Search results

  1. Z

    Hey! I found some white Cargo panels in decent shape...

    Don't use sand paper unless you want a sanded smooth finish there is a texture you want to preserve. use chemicals and soft nylon bristles
  2. Z

    50oz flexplate

    take your crankshaft, Harmonic balancer, flexplate to a machine shop be sure you get a 50 oz balancer and crank also they can match your parts balancing and blueprinting also some shops like you to carry the pistons and rods
  3. Z

    Problems with starter maybe or flywheel?

    yup that'll do it.
  4. Z

    Griffin Aluminum Radiator (PICS)

    do cross flows provide better cooling you could place it on its side and use the II hose filler :rlaugh:
  5. Z

    Problems with starter maybe or flywheel?

    go with the drive replacement if it sounded good before. Once you lose the original fitting casing its all down hill As a matter of a fact some folks just have their original rebuilt. I know you said it was a lifetime but there are differences in the casings Trust me!!!! Good luck...
  6. Z

    Mustang II Respect

    lets all look at the title of this thread and remember its about the II that were here. Its a known fact you cannot get along with everybody all the time let have alittle respect for people as human beings and not continue the slander just because everybody else does it. sleeper close this...
  7. Z

    Radiator Cooler x Water

    Green or blue ----antifreeze temp should be in the 180 range should you have a 180 thermostat in it 50/50 mix whatever it takes to keep the block from freezing although antifreeze also keep it from boiling by raising the boiling point I lived in San Antonio I ran mostly water there alittle...
  8. Z

    Cam choices! Help me decide!

    agreed both of mine were under 220 ° @ 50 here are the links 130042----210° 130052 ----216°
  9. Z

    Cam choices! Help me decide!

    76 COBRA II 302 .040 over, flat tops, ported/polished heads, cranecam 272 duration .484 lift, Erson full roller rockers, headman headers, edelbrock intake and carb 600 cfm, 3.40 trac-loc Here is my set up this cam is in the 2000- 5000 range I had the 266 with .469 lift its range was...
  10. Z

    Who Had their II before the internet?

    got my 76 in 87 I didn't have my first cpu until 95
  11. Z

    VERY IMPORTANT!!!!!

    agreed not a very accurate way to measure actually usage think about how many times you roasted the tires stop and start go on a long drive on the interstate Lets do the math 15 gallon tank ---- 15/4 =3 3/4 gallons per quarter 3.75 x 8 MPG = 30 not overly excessive in my...
  12. Z

    Front bumper mods

    Wow using a classic to mod a II :nice: Bet them boys are lovin that :bang: let us know how it works out..
  13. Z

    Is the Mustang II worth getting?

    welcome I wish mine was mint headliners avail on ebay http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=2480595767&category=33705&sspagename=WDVW
  14. Z

    Door panels. Coupe vs. fastback

    They should fit -------------except there are II types of armrest deluxe long armrest and a short one. check ebay you will see what I mean. which do you have?
  15. Z

    One-wire Alternator

    AMP guages suck funny --a couple times when my stereo got quiet no whinning noise I knew I was not charging 1- ripped a belt 2- bad regulator 3- when she won't start anymore :notnice:
  16. Z

    Bypassing heater core

    I have done it serveral times just a short hose on the water pump and intake The only down side is rainy season windows fog up they clear better with heat. plus the other stuff about the coolant level and cooling ability are nominal Replacing the core is really not that much work once...
  17. Z

    Is the Mustang II worth getting?

    If its got Cobra door panels possibly there wasn't much difference any way between a true cobra ---cobra II door panels, snake in the grill, side window louvers w/snake and a stripe kit and spoilers It should have a v/8 symbol not 5.0 once again check the buck tag If your wondering about...
  18. Z

    Starter Madness

    Hey Stew Lets not bite the hand that feed us! You asked for help and we gave you what we know, we have done this topic to death before you came on here. The things you listed you have never mention before so don't critize us on how we think. starters go bad (fact of life) the...
  19. Z

    Steering Rack Removal

    I have never used any special tool just loosen the nut a few sharp wraps on the nut and its loose if that don't work get a bigger hammer :lol: ps. I like the air hammer idea --- thanks Blue Thunder
  20. Z

    What do you think i should get ?

    get a decent grind on a camshaft will get you more low end torque cam and lifters must replace as a set around 100 bucks some speedshops.
Top Bottom
Back
Forums
Menu