Search results

  1. 92rohcp

    Kenne Bell A2A intercooler kit for Fox body and sn95

    Yes sent you a message.
  2. 92rohcp

    DIY air to air intercooler on Kenne Bell for 92 LX

    I just copy and pasted this from my build thread on the corral. You can see where I stenciled the gasket on the bottom of the KB manifold. You will need to find a welder that can add material to outer ears of the manifold. You can see from scribing the Trick Flow R gasket that the end bolts are...
  3. 92rohcp

    World's Quickest And Fastest Kennebell Sbf Mustang Part 2

    Hi Walter, very impressed with your success and even more impressed that the 2.8L has no boost loss. What timing can you run with the higher compression.
  4. 92rohcp

    World's Quickest And Fastest Kennebell Sbf Mustang Part 2

    By the way how was the 2.8l keeping up to the larger motor and 8.500rpm. What was you max boost? Any boost drop off? What rpm are spinning the KB, and pulleys uses?
  5. 92rohcp

    World's Quickest And Fastest Kennebell Sbf Mustang Part 2

    I am floored by that pass...you guys are killing over and over again. Hands down the fastest pushrod kenne bell ever, and can't see anyone getting close to that. My hats off to both of you for inspiring those who want and dare to be different, and to those who say it can't be done with a twin...
  6. 92rohcp

    DIY air to air intercooler on Kenne Bell for 92 LX

    Sounds good, LMK when you will be shipping out and I'll seat working on bypass provision.
  7. 92rohcp

    DIY air to air intercooler on Kenne Bell for 92 LX

    I was at lejuene early 90's, Semper FI my friend. I can use your bypass and route the inlet to the bypass I another location. I'd have to design something first and then run it by you so how you like it. The cost of the intercoler fabrication and welding is $1100 shipped. I would need your...
  8. 92rohcp

    DIY air to air intercooler on Kenne Bell for 92 LX

    The a2a can be done with the standard lower, however the external bypass with have to be changed. I have idea for that if interested.
  9. 92rohcp

    Kenne Bell A2A intercooler kit for Fox body and sn95

    Always here and and ready to help.
  10. 92rohcp

    Kenne Bell A2A intercooler kit for Fox body and sn95

    You should only use alum pipe, even the elbows need to be supported because it sees vacuum that will collapse a none ridged or supported silicone elbow like a 45 degree. Making the pipe fit is not hard and I could help you with that.
  11. 92rohcp

    Kenne Bell A2A intercooler kit for Fox body and sn95

    Hi I only do the fabrication and welding to the intake like seen in the picture above. So you would have to send me you kb manifolds and I do the rest. The pipe routing is not hard and can be done locally or by you all the pipe bends are in my instructions from the beginning of the thread.
  12. 92rohcp

    DIY air to air intercooler on Kenne Bell for 92 LX

    I do offer modification to the KB manifolds with compact bypass provision. Here is my last customers manifolds ready to ship. I would need your manifolds and at least 4 weeks and could fit your into this this winter. PM me for details.
  13. 92rohcp

    Kenne Bell A2A intercooler kit for Fox body and sn95

    Hi I am making the modification to the KB manifolds. I would need your and 4 weeks to complete the fabrication and welding. As far as the intercooler pipe goes that has to be fitted while on the car and would be best left to you. I can help with choosing the pipe angles. Here is an example of...
  14. 92rohcp

    Fastest 5.0 (pushrod) Kenne Bell Mustang?

    Outstanding my friend. You guys are locking this down for sure.
  15. 92rohcp

    Fastest 5.0 (pushrod) Kenne Bell Mustang?

    Yep...it's sucks for sure. But I got it out drilled the end cap until it broke free, then was able to break free the threaded stud left over. Thank god that's over.
  16. 92rohcp

    Fastest 5.0 (pushrod) Kenne Bell Mustang?

    Just stripped my pulley bolt, wouldn't come off and the Allen head stripped inside the socket. It was the 12.8 hardness bolt to. You guys have any suggestions to get this out, seems difficult because the socket head is recessed inside the pulley. What a pain in the ass.
  17. 92rohcp

    Fastest 5.0 (pushrod) Kenne Bell Mustang?

    Yeah funny how injectors a re rated for more power than they can actually deliver. I to went from 60lb to 80 last year and when I got it all running with the new mega squirts ECU my duty cycle was back to 95% with the 80's. 80's should be good for 1000 crank 750whp and I'm sure I'm not there...
  18. 92rohcp

    Fastest 5.0 (pushrod) Kenne Bell Mustang?

    Wow...so you guys picked up a couple psi with the bigger throttle body and air to water core. Outstanding work all around your design is really proven its strength.
  19. 92rohcp

    Fastest 5.0 (pushrod) Kenne Bell Mustang?

    Unbelievable guys you will be snatching the 8 second time slip soon. Hard work dedication and a passion for the twin screw coursing through your vanes. I would like to know what got you there. What was your timing, act temps air fuel ect. And my time slip is not even in the same ball park street...
  20. 92rohcp

    Fastest 5.0 (pushrod) Kenne Bell Mustang?

    How is the aluminum pulley holding up for you, any wear from heat and friction.
Top Bottom
Back
Forums
Menu