Search results

  1. SVTtripleblack

    Cobra ecu in Stock GT???

    I guess it wouldn't hurt to try the j4j1, but I'm still not too sure it would run right with the e7 heads. :shrug: Heads are really what makes the engine. The air flow differences between the two heads aren't vast, but they are significantly different. I don't know if the Cobra pcm can learn...
  2. SVTtripleblack

    Can someone help me out with my 1994 Mustang GT

    Like said before, clean your MAF sensor wires. My car ran like crap within a few weeks after I re-oiled my K&N that I had at the time. It is a gradual decrease in power untill it gets really really bad! After I cleaned the MAF, my car felt like it gained back 30 hp. Also do a tune up if you...
  3. SVTtripleblack

    Cobra ecu in Stock GT???

    Like said before, the MAF's are the same on the gt and Cobra. The pcm makes up for the difference between the 19 and 24# injectors. You would at least need to get 24# injectors. Even then I'm not so sure it would run o.k. because all of the differences in the flow rates of the intake, heads, and...
  4. SVTtripleblack

    Cobra lost power after installing Crane 2031 cam

    Thanks I appreciate the good words. It hasn't been the best couple of weeks for me and my car. lol Yeah it was one heck of a coincedence. I called the other shop about paying for the repair of the gasket and he gave me a ton of hassle about why I didn't call him right away. He said they...
  5. SVTtripleblack

    Cobra lost power after installing Crane 2031 cam

    The oil leak turned out to be the lower intake manifold gasket which wasn't centered properly.
  6. SVTtripleblack

    Cobra lost power after installing Crane 2031 cam

    Well it looks like the stator fixed the no starting/stalling out problem, but now there is yet another problem. :mad: I noticed a few days after I had the cam replaced my car was leaking a good bit of oil. More than usual. I just thought maybe since it's warmer out now that maybe my drain...
  7. SVTtripleblack

    Cobra lost power after installing Crane 2031 cam

    I really don't think that screwing around with fuel pressure on these cars is a good idea unless you do it through the computer via a custom burnt chip on a dyno. You might be able to get away with that crap on a fox body, but I've heard so many negative things about it for our cars. Besides, I...
  8. SVTtripleblack

    Cobra lost power after installing Crane 2031 cam

    The cam isn't the problem. When the car was running it idled perfectly and gave me no other problems. I really don't think my A/F ratio is all that far off. It seems to be a coincidence that this problem happened around the same time. The tech said I'm not getting any juice at the distributor...
  9. SVTtripleblack

    Cobra lost power after installing Crane 2031 cam

    Well, I had the car towed to the local Ford dealer. Hopefully they can figure out the problem and it won't cost me an arm and a leg.
  10. SVTtripleblack

    3-inch exhaust

    MAC makes a 3" catback system for your car. That's what my buddy has on his. Or you can buy 3" pipe from flowmaster and have a shop fab up the exhaust for you.
  11. SVTtripleblack

    Cobra lost power after installing Crane 2031 cam

    Usually the car won't start up a second time after I get it to run for a short while. If it does, it's usually only once more and it dies within seconds. Sometimes the car isn't even warmed up to normal operating temp. The car was starting after I replaced the fpr whether it was warm or cold but...
  12. SVTtripleblack

    Cobra lost power after installing Crane 2031 cam

    It's the original one. I thought about something being wrong with that also. It just seems like it should last longer than 70,000 miles. Will any codes show up if the check engine light doesn't come on? I did get it to idle for 10 min the other day and then it stalled. Maybe that threw a...
  13. SVTtripleblack

    Cobra lost power after installing Crane 2031 cam

    When the car is running, I got it to idle perfectly around 750 rpms and it doesn't surge at all even with the new cam. I tried adjusting the screw to open the throttle plate a little more and the idle increases to around 1,000rpm and the idle is rough and surges a bit. I think it's set at the...
  14. SVTtripleblack

    Cobra lost power after installing Crane 2031 cam

    Will any codes show up if the CEL doesn't stay on? I also unplugged the battery to reset the ECU. Will that erase any codes? The only reason I keep resetting the battery is because that's the only way I can get the car to start. Once it starts I have to keep my foot on the gas a little to keep...
  15. SVTtripleblack

    Cobra lost power after installing Crane 2031 cam

    The car won't start again. It ran perfect yesterday, but this morning it wanted to keep stalling out. I got it warmed up and took it out on the highway. The car started losing power, and then regaining it again like it was bucking. I made it out onto the highway and it did the same thing, but...
  16. SVTtripleblack

    Cobra lost power after installing Crane 2031 cam

    It's Alive!!! The new fuel pressure regulator did the trick. it wouldn't start at first, but once the pressure was relieved from the system it worked. I wish I didn't have to say this, but here's where it gets bad again. After I got it running, I decided to take my wife out to Dairy Queen...
  17. SVTtripleblack

    Cobra lost power after installing Crane 2031 cam

    I couldn't wait for the adjustable fuel pressure regulator so I just went out and got a stock replacement at autozone. You guys are right, there is absolutely no way this thing can be adjusted at all. I don't know what he could have done to this thing to adjust pressure at all. It's one solid...
  18. SVTtripleblack

    Cobra lost power after installing Crane 2031 cam

    Oh, and after washing my car I noticed two light but long (6-8") scratches on my freshly painted hood ( just fixed 2 months ago from my idiot brother in law backing up into it). Luckily I could polish them most of the way out. Man I would ream that shop out if that didn't come out. You live and...
  19. SVTtripleblack

    Cobra lost power after installing Crane 2031 cam

    Well I pulled my plugs and they were soaked with fuel. I bought a back up set and installed them and got the car to fire. It only idled for about 30 sec then died again. Just like you suggested, I think my fuel pressure is somehow way to high. I'm going to get a afpr and set it to 40 with vac...
  20. SVTtripleblack

    Cobra lost power after installing Crane 2031 cam

    Thanks, I will try to get it started tonight. I had to go on a small business trip and I wasn't able to work on it. Any ideas why my plugs were getting fouled in the first place? I mean, I know why they are now, because I kept on cranking the car without holding the gas down and soaking the...
Top Bottom
Back
Forums
Menu