Search results

  1. SVTtripleblack

    Cobra lost power after installing Crane 2031 cam

    Well tomorrow I will ask him to dyno the car without the chip. If my hp and tq numbers increase, then I can confirm something is up with the tune on the chip. If it does increase, I will ask him to do a reburn on the chip. Being that I've never seen any values on my computer via a tweecer or...
  2. SVTtripleblack

    Cobra lost power after installing Crane 2031 cam

    He adjusted the fuel pressure with an afpr, which I don't get because I don't even have one on the car. I tried to tell him that I thought my computer would re-adjust the fuel on its own and that it would cancel out anything he did. He said it shouldn't when I'm at wide open throttle. Is this true?
  3. SVTtripleblack

    Cobra lost power after installing Crane 2031 cam

    You know,.. the thing that gets me about this place is that they have a dyno and they are an authorized Diablosport dealer, but they are tuning my car manually. And doing it manually even though I have a diablosport chip. That's why I went there in the first place. I figured I could get them to...
  4. SVTtripleblack

    Cobra lost power after installing Crane 2031 cam

    Thanks Grady, I always respect your advice and I know you are an eec tweecer guru :p Do you think the chip could be suspect? I don't know enough about how many parameters could be changed with it to do any damage after the install. Do you think maybe he didn't disconnect the spout to advance...
  5. SVTtripleblack

    I don't like my 95 cobra exhaust

    I have the 40 series flowmasters as well. If you want the traditional musclecar sound, that's probably what you want to go with.
  6. SVTtripleblack

    Cobra lost power after installing Crane 2031 cam

    I'm thinking about asking him to pull the chip out and re-dyno the car. The chip has a mail order tune on it and I think it's not working well with the cam. Does anyone know if this is a possibility? Anyone have a fairly stock cobra with this cam and what kind of #'s are you making? Thanks
  7. SVTtripleblack

    Cobra lost power after installing Crane 2031 cam

    So, I just got off the phone with the guy who installed my crane 2031 cam. He said after putting it on the dyno the car lost power from my previous numbers with the stock cam. After he played around with the timing he said he got the peak numbers back to where they were before the cam install...
  8. SVTtripleblack

    Gas in Cobra??

    Even the lowly :p 93-95 cobras require 91+ octane. I know you're concerned about gas prices (we all are), but I would definately spend the extra couple of bucks on a fill up for 91 instead of 89 to reduce the risk of detonation. This is a fairly high performance car we are talking about. It...
  9. SVTtripleblack

    Changing Fuel Pressure with Computer?

    But then how can the car be tuned to get the optimum A/F ratio? Can you change parameters in the computer to get it where it should be?
  10. SVTtripleblack

    Changing Fuel Pressure with Computer?

    I am getting a cam installed next week and I was wondering that if the car would happen to run rich or lean after the swap; can the fuel pressure be changed via my diablosport chip on the dyno or would I need a fuel pressure regulator? From what I've heard a fuel pressure regulator for our cars...
  11. SVTtripleblack

    Fuzion ZR1's?

    Mine lasted about 35,000 mi. which is pretty good for a performance tire. I actually still have them on the front, but they are borderline passing inspection. They were an ok tire. Nothing special as far as grip, but held up well. If you have a lot of mods go with a drag radial on the back. They...
  12. SVTtripleblack

    Crane 2031 cam install on a 95 Cobra Questions

    Thanks, but I think I'm going to go with the place that did my last tune. I don't think I will find anyone much cheaper that will also check to make sure my car has a good A/F ratio. Most shops charge $65-$70 an hour anyway. A lot of people were saying it shouldn't take too long to do this cam...
  13. SVTtripleblack

    Crane 2031 cam install on a 95 Cobra Questions

    I got the phone # from SGS on their website. I tried calling and the # is no longer in service. I even double checked to make sure I was right. The other place got back to me and quoted 700. They will also do two pulls on the dyno to make sure the A/F is ok at no extra charge. I will probably...
  14. SVTtripleblack

    Crane 2031 cam install on a 95 Cobra Questions

    Actually I did say an hour away. And that's only because I could do about 70-75mph on 81 to get there. But no, I never heard of them. Thanks, I'll give them a ring after work.
  15. SVTtripleblack

    Crane 2031 cam install on a 95 Cobra Questions

    Hey, only an hour away! Did you have work done there? I'll call them after I hear back from this other place
  16. SVTtripleblack

    Crane 2031 cam install on a 95 Cobra Questions

    Sounds mean :nice: has a nice little chop to it.
  17. SVTtripleblack

    Crane 2031 cam install on a 95 Cobra Questions

    For you guys that have the Crane 2031 how does it sound at idle? I tried to find some sound clips but I didn't find any. Did you loose a lot of low end torque with this cam? I called the guys at Don's Performance Corner today about installing the cam. They did my dyno tune and are very...
  18. SVTtripleblack

    Crane 2031 cam install on a 95 Cobra Questions

    That is very impressive. :nice: I didn't know you can run that much on a stock motor. I guess I'm just gun shy about playing around with the stuff. I just don't know enough about it.
  19. SVTtripleblack

    Crane 2031 cam install on a 95 Cobra Questions

    I have considered that, but I want a car that has the power there when I want it. Plus besides running colder plugs, what else would I have to do to the engine? Wouldn't I need to get a tune after installing it? My last tune ran me $300 I also thought about going the aluminum head and better...
  20. SVTtripleblack

    Crane 2031 cam install on a 95 Cobra Questions

    Well I just talked to the other guy and he quoted me $900. And then he gave me this schpeal about, "and that's the price if everything goes as it should." WTF anyone know of any good shops in South Central PA that doesn't want to bend me over for a cam install?
Top Bottom
Back
Forums
Menu