Search results

  1. Tanus

    boost question

    the block will go before the rods/crank, should be good under 500hp
  2. Tanus

    Got the Mach tuned today...

    you only have exhaust? if so thats real good power, way more than Id expect a stockish mach1 to make, congrats!
  3. Tanus

    BBK Intake Noise after upgrade

    everything made by bbk is total crap, my old bbk throttle body broke and one of the tiny screws that holds butterfly plate went into my motor, I contacted bbk and they were total dicks, F*%K BBK
  4. Tanus

    Manual shifting an aod

    when I was 16 and borrowing my moms car, auto tempo v6, Id floor it from a light and right as it shifted 2nd Id upshift to nuetral(still full throttle) hold it for like 1/2 second or less, then back in drive and it would chirp the **** out of the tires, haha, good times
  5. Tanus

    Polyurethane trans cross member bushings

    Im curious about this too, mine look pretty dry rotted fox cars do, pretty sure the sn's do also
  6. Tanus

    dyno session, what a reality check lol

    I read your parts list before seeing the dyno #s, I guessed 280hp 325tq,so I was pretty close. cam is your weak point, put in a big cam, hp could go to 320 at 6,000rpm, torque drop to 320 at 4,500.
  7. Tanus

    Rear upper control arms...

    with the double adj you need to get an angle finder with magnetic base, then you set the rear at -2(street) to-4 (race) degrees in relation to the driveshaft. I set mine to -3
  8. Tanus

    1.48 60' Hell Yes!

    hows it feel with no rear sway bar? think its worth it for me to pull mine, Ive long since gave up on handling, haha
  9. Tanus

    Rear upper control arms...

    yeah, I think the new bushings in the arms that make the biggest difference. the solid tubular ones just get bolted in, are they the double adjustable ones?
  10. Tanus

    Fuel Pressure Regulator

    the stock one will hold it just fine at 40psi, if thats what you want my plugs always looked lean so I got an adjustable and turned it up to 45psi, basically turning my 24lbs injectors into @26 lbs injectors
  11. Tanus

    Picked up another fox today, again.

    you pretty much have everything, alll you need is a bigger fuel pump and a set of matching maf meter/24lbs injectors.
  12. Tanus

    Picked up another fox today, again.

    you better put in that H/C/I motor! if I had a friend with a 350hp motor just sitting there and he's still driving around with the stocker Id kick him in the nuts! hahaa
  13. Tanus

    New intake setup...

    nice! I bet that will add a good amount of HPs, 30-40 Id guestimate. post some pics once you got it on there.
  14. Tanus

    1.48 60' Hell Yes!

    great 60, just got some 28inch slicks also, cant wait to test them out, my best with 26's is 1.60s, Id be super happy with a 1.5x, last time at track with street tires was a 13.0 at 110 with a 2.2 60 haha so if I can get a 1.5 Im thinking I might be able to hit an 11, that would be awesome!!
  15. Tanus

    Dangerous posi issue, please help! Almost died.

    holy chit, Id guess its the spyder gears also, if it was R&P, after it locked once it'd usually stay locked. take it apart, post pics
  16. Tanus

    Small Update

    looks good, should of went with a bigger tire since you went through the trouble of tubbing it, I run that same size by beating in inner fender and rolling the lip on outter. edit- oh mine are the regular 10.5s, not sure the dif between the Ws
  17. Tanus

    what intake to use?

    that stage 2 cam will pull to +6,500 so Id say systemax cam for sure
  18. Tanus

    FYI Found the Airbag code clearing plug

    is this the same for fox bodies? my 90lx has flashed the airbag light since I bought it, 10 years ago!
  19. Tanus

    Went To The Track Yesterday And Learned Something

    I run the 28x10.5 et drags, which is a super tight fit, but for some reason the et streets and et drags are slightly different sizes, I bet the et street fits perfect, if I were to get another et drag it'd be a 27x10. Im hitting the track up tonight most likely. 12.0 is my goal, but I'll be ok...
  20. Tanus

    trick flow heads which ones to buy so many choices

    Id go with trackheats 190 and stage 2 cam, probably have PTV issues though
Top Bottom
Back
Forums
Menu