Search results

  1. CRASH7772

    Strut Tower Brace - Clearance Issue

    Central NH and I hit the drags when I can but it's about 1 hour away so I don't get down as much as I would like to.......our best bet is the Maximum Motorsports for clearence. The guy that has the E-bay link makes a spin off of the MM one as well. The Pro 5.0 shop you say.......I don't think...
  2. CRASH7772

    Headers on a stock engine worth it or not?

    If you ran a 1 1/2" equal or un-equal you might gain some but anything larger is not worth it. Spend your money else where if you want improvements.
  3. CRASH7772

    Quietess Exhaust

    How's this.... Sound Off in Quietest to Loudest (Decibels): 1.Borla XS, 80db at idle, 90db at 2,000 rpm, 110db at WOT. 2.Hooker Maxflow, 80db at idle, 90db at 2,000 rpm, 120db at WOT. 3.Magnaflow, 82db at idle, 91 at 2,000 rpm, 114db at WOT. 4.Flowmaster, 82db at idle, 93 at 2,000 rpm...
  4. CRASH7772

    Strut Tower Brace - Clearance Issue

    The MM is supposed to clear all if possible. I just wish I could get mine to bolt up. Steeda says my car is screwed but so far it fits the same on 2 different Fox chassis....I think they screwed up.
  5. CRASH7772

    Emission pump by-pass???

    That is a possible.....I forgot about that since I have been bypassing the pump but running a Pro-chamber.
  6. CRASH7772

    A/C Delete and H-Pipes

    Ummm...what he said.
  7. CRASH7772

    Emission pump by-pass???

    You should have no issues....and probably picked up a couple of ponies in the process that is I'm assuming that you are routing the belt not using the air pump? And if not you should....
  8. CRASH7772

    should i got back to sd would it run right

    IMO you made a bad choice swapping to begin with. Everybody likes to put SD down and they think Mass Air is the magic fix. You should have no issues with your old set-up. What made you decide to switch anyways?
  9. CRASH7772

    New 86 GT Speed Density What CAN\CANT Do

    Long live a old thread..... Anybody have any thoughts on this cam for SD? Intake Exhaust Gross Valve Lift 0.507 0.507 (With 1.6 Rockers) Valve Timing @ 0.050 Open Closed...
  10. CRASH7772

    please help with messed up idle!!!

    What about the MAF sensor? This site has some good ideas for idle issues but you have tackled most. http://www.muscularmustangs.com/maintain.php
  11. CRASH7772

    Question about used cams

    I know a lot of people use used cams. What is they best thing to do if you do use a used roller cam espically with lifters? What could or would happen if you use stock lifters or the lifters that were run on the used roller cam? Do they need to be matched up were they were ran? I know with...
  12. CRASH7772

    Are gears worth it?

    I have stock 2.73's and don't really mind them. I love the fact that I can run 80mph and only tach 2000 rpms. My feeling is if you have the torque to pull the gear then run it. Gears are usually made to compensate for low end loss, larger drag tires, or to keep you in a certain power band. After...
  13. CRASH7772

    ? on Tires...what do you have and do u like it.

    The 555 isn't a drag radial, the 555R is.
  14. CRASH7772

    Tire issues/ size chart

    If it has the stock driveshaft I would be willing to bet that's your vibration problem.
  15. CRASH7772

    Kenne Bell install

    You might need more that a 190lph pump being supercharged. I would go with the 70mm over the 65mm. Are you on stock heads? Your timing would probably depend alot on your heads and every motor is different. Run the 8lb pulley for now and you can always upgrade later on. Not sure what your...
  16. CRASH7772

    Selecting Clutch and Cable

    I would vote for the Pro 5.0 shifter and UPR triple hook quadrant 3pc kit. I bought my UPR kit for $75 shipped from NITROSTANGRACING.COM.
  17. CRASH7772

    The best ricer pic EVAR!!!!!

    How's this??
  18. CRASH7772

    speed density cam?

    Any idea on how much lift the stock 5.0 87GT motor can take with Windsor Jr heads? I called Crane cams and they said basically the only cam that they have which will work on SD is the Powermax 2020. Part Number: 444211 Grind Number: POWERMAX 2020 (FORMERLY COMPUCAM 2020) Engine...
  19. CRASH7772

    OT: OMG I am so pissed!!! I can't believe some people!!!

    If you spent all that $$$$ on a car like they did and get smoked and out classed by a 5.0, theirs your reason. Some people just have no respect and certainly no class no matter what overpriced POS they drive. Messing with a car just isn't right PERIOD. :notnice:
  20. CRASH7772

    Converting to mass air, what size meter and injectors?

    http://www.pro-flow.com/tech%20info/sizing.htm
Top Bottom
Back
Forums
Menu