Search results

  1. backfocus

    A/C woes - the $1200 Evaporator RNR

    I have replace my entire system, all with parts from ackits.com. There site is great and sales guys are knowledgeable. They have the evap for $70. Sounds like your system is almost empty so you could have it fully discharged, replace the evap yourself then have it recharged by the shop. It...
  2. backfocus

    Tuners in Arkansas

    Bolt On is also East End Towing. He helps out our car club on occasion, and we have dyno days there every now and then. He is very knowledgeable about mustangs and as long as you have a mild setup, I would feel comfortable using him. His shop doesn't look like much, but he does know his...
  3. backfocus

    Tuners in Arkansas

    Where are you in Arkansas. I know of one in Little Rock that knows mustangs, but if you have a big setup I would go to Memphis. If you tell me where you are I can help you a little better.
  4. backfocus

    Dart 302 block, forged crank, rods, etc., etc...

    I see now after a closer look at the pictures it must be the straight Iron Eagle.
  5. backfocus

    Dart 302 block, forged crank, rods, etc., etc...

    Which Dart Block is this?
  6. backfocus

    Font end sqeaking!

    It is probably the sway bar bushings. I had that happen on mine and I just replaced them. It could be the end links too, and I would just replace both while you are at it and have it apart. You could spray some WD on them and see if it helps at all, if you are still unsure, but it is hard...
  7. backfocus

    Help my Identify these heads?

    I thought that I had some better picts, but I guess I deleted them. If I have a chance I will take some picts tonight, since they are laying out, but I did find this one. Do yours have any stamping on the front of the heads? The more I look at them I don't think they are High Ports...
  8. backfocus

    Help my Identify these heads?

    Just FYI, it took me 3 months of calling and research before I found out what mine were. Most of the people that work at Trickflow where not there when they first made the High Ports, so they still could be. Later today I will pull you some picts of mine to compare.
  9. backfocus

    Help my Identify these heads?

    Those look similar to my old high ports, but it is hard to tell form the picture quality. Can you take a pict of the front, where it should have the stamping. The old high ports are aluminum, but are rough cast, not smooth. I should be able to tell front the front pict. Also the high ports...
  10. backfocus

    88 mustang 5.0 wiring harness

    Here is a factory style harness. RJM Injection Tech 5.0L Classic Harness
  11. backfocus

    333 STROKER BUILD 25 PICS

    Maybe a silly question, but what makes it a 333 vs a 331. Is the bore slightly larger than 30 over or is the crank slightly different. I have always been curious about this as many some list it a 333 and some a 331. Nice setup by the way. :nice:
  12. backfocus

    Tweecer Dyno tuned Thursday

    subscribing
  13. backfocus

    A/C compressor question..

    As always jrichker has you covered, but if you replaced the compressor before, and then charged it with 134a without flushing or changing anything else, you might have some problems down the road with the compressor or other parts. If that is what was done, you might want to have a shop flush...
  14. backfocus

    Quick A/C flush question.....Jrichker or anyone else

    A good simple way is to use a flush gun such as the one below. You can use Mineral Spirits or a commercial flush solvent. Spray it in one end and hold a rag over the other, this helps create some pressure to force out any particles, letting the rag loose after a few sprays. Do this a...
  15. backfocus

    dynamat to reduce heat and noise?

    I agree with what Pokageek is saying, especially on the sound deadening. One thing the article did not compare is a spray insulation and heat shield. While I have use the sheet stuff in the past and liked it we recently decide to try the new Lizard Skin spray. We applied it to my uncles...
  16. backfocus

    Clutch safety switch location???

    I would think that would be correct, I read over the part about the pedal, although the NSS does come into play in the system as well, but not what you were referring to I think.
  17. backfocus

    finding your foxes original owner?

    I am the second owner of my 90, but I bought it back in 1993. Actually acquired it from my parents neighbors, who owned a car lot and he found it at an auction, in St. Louis. I had told him if he ever came across a good mustang at a decent price I would be interested, 2 months later he show me...
  18. backfocus

    Clutch safety switch location???

    Top of the trans on the drivers side is where the NSS switch is located.
  19. backfocus

    pulling hair out and losing sleep

    I would consider that maybe you have the dizzy stabbed out of place. It could be a tooth or so off, but could be more than that.
  20. backfocus

    Brake upgrade parts???

    Thanks 5l5, I will see want he wants, the last we talked I could get everything calipers, rotors, spindles and all for $400.
Top Bottom
Back
Forums
Menu