Search results

  1. backfocus

    cannister purge circuit

    Canister purge solenoid is attached to the Charcoal canister. Which is on the passenger side engine compartment, down low in front, on the frame rail below the original air inlet box, looks like a black box. It traps excess fuel fumes from the intake, then sends them back to the tank. The...
  2. backfocus

    Hey all, new member here with a few questions

    :welcome: to the boards! I am just familiarizing myself with the world of turbos too, and I will say that for a 331 the 42 is probably going to be a little small. Most people seem to be using a 60 to 70, or 72, usually on the bigger side for a stroker. I wish you well with the DSS as a lot...
  3. backfocus

    5.0 resto timing covers, whats the deal?

    I had the same deal a month or so ago, trying to find one for my build. It is crazy the prices they want for them. No way was I paying over a hundred bucks for a piece of stamped aluminum. I ended up getting a brand new one with gaskets on ebay for $68. Seemed to be the best place to find...
  4. backfocus

    Cam swap w\ AC

    I could of swore that said compressor not condenser, sorry I didn't answer your, but glad out got it figured out.
  5. backfocus

    Cam swap w\ AC

    If you don't want to open the system take it out of the bracket and carefully place it over on the passengers side where air box is. The flexible hoses will flex enough for that, just be careful. I have also seen it move to a portable bench right outside the passengers side fender.
  6. backfocus

    Code 67

    Ok so the top sensor on the LH side of the Trans is the Backup switch. The NSS or Clutch switch (Depending on what book you are looking at) is on or behind the clutch petal arm under the dash. This is what Alldata states as far as testing. This switch functions magnetically. Do not use...
  7. backfocus

    Code 67

    Hold on this looks right now! Believe in or not autozone may have something right. Let me know if this looks correct, but I am still checking when I get home in a few hours...
  8. backfocus

    Code 67

    That is what it showed for it. Since I have my motor out tonight I will look since it should be easy to find. I can't find any info on testing the switch or a close up to confirm that, that is correct. Although the price seems to be right according to All Data. Maybe someone else can chime...
  9. backfocus

    Code 67

    Here you go. Did you test yours to see if it is working? It could be a wire too, I will look how to test it and get back to you.
  10. backfocus

    Headliner Install

    Most of the time the problem is that the fabric has a foam backing and the fabric comes away from the foam over time. I would just do it yourself Coachpete! As Williams stated it is fairly easy. You can find the headliner material at many fabric shops or go to an upholstery shop or suppler...
  11. backfocus

    Gasket??

    Yes the lower intake to heads gasket are the same.
  12. backfocus

    Painting Headers???

    caseywan, do you have a bead polisher too that makes the coating shine like Jet Hot's Sterling or extreme sterling coating? Just curious since I have some headers for a different project I will be needing done before too long.
  13. backfocus

    Painting Headers???

    Check out Eastwood: http://www.eastwoodco.com/jump.jsp?itemID=394&itemType=CATEGORY&iMainCat=390&iSubCat=394 Look at the Brush on silver, factory gray, or black. I have used the factory gray on my old S-10 drag truck headers and it worked well. I also just painted my engine with the...
  14. backfocus

    Radio pros, need your help...again.

    Fett, you are correct on the grounding. That is why it wouldn't work well in your hand as the antenna grounds to the fender. Some radios also need an external ground but I have not seen any for a long time. Most new radio are now grounded through the harness. Edit: Most antennas are also...
  15. backfocus

    FOTM Changes

    First off I vote No, but just for a few reasons. The voting period is way too long. Needs to be 1st, 5th, and winner no later than the 15th, or something close to that. It also needs to be run the same time every month. Which means there is ONE Administrator and someone to back him up...
  16. backfocus

    Code 67

    Only a guess, but as stated above probably the NSS!
  17. backfocus

    Code 67

    You swapped to a T5 Correct? Just a silly question, but the car is in neutral, correct? That will throw a 67 if it is not, but again I am not overly familiar with the A9P
  18. backfocus

    cant get other bolts off headers

    Since you have already tried the PB route, the next step is to apply heat. Use a propane, or like, hand held torch and slowly apply heat to it. Then try to loosen it. My guess on the bolts is that you have a valve cover leak, but just a guess.
  19. backfocus

    Help with Tune-Up

    Looks like you have most of it covered. The only things I can think of is check and replace if needed, drive belt and any vacuum hoses.
  20. backfocus

    audio question, speaker wire, whitch is negative..

    Not sure if it will help in your situation, as I am still a little confused as to what you are asking and what you have done, but here is some an installer trick you might not know. If you have the speakers hooked up and you are at the radio or amp and are unsure as to which wire is positive...
Top Bottom
Back
Forums
Menu