Search results

  1. Poopie D

    Front Bumper removal...need some concrete answers

    I mucked up my front bumper of my 02 GT the other day and I need to take it in for a sanding and re-paint. The shop said they would charge less if I took the bumper off myself. So, I looked around for some info on removing the bumper and I have a few questions: * Are there some sort of...
  2. Poopie D

    orbital polishers

    UAP/Napa should be able to get anything you need. You can call Meguiars Canada...They are in Mississauga. P.S. Forget about the Simoniz...piece of crap (goes by Blue Coral in the USA) http://www.meguiarscanada.com/
  3. Poopie D

    Just finished waxing...few questions

    I just finished waxing my black, 02 GT. The previous owner never waxed and must have washed the car with steel wool. There were so many swirl marks and scratches I was not hoping for much success. I called Meguiars and the advised me to go with a Clay Bar, then Scratch-X, then Gold Class...
  4. Poopie D

    help me dynamat!!!

    I actually put the factory splash guard back in on top of the dynamat...works fine, and I thought I would leave the big holes just in case I need to do some window work...and I ran out of Dynamat! I am still running the Mach 460 for the time being....it is not too bad with the doors sealed...
  5. Poopie D

    Hooking up Sub

    Try here: http://www.mustangworld.com/ourpics/fcar/despeeds1.htm and here: http://www.flemworld.com/Mach460/mach.html and here: http://www.crutchfieldadvisor.com/reviews/ISEO-rgbtcspd/mustang_install.html maybe here: http://www.mustangaudiosystems.com/MustangAudio_page2.htm...
  6. Poopie D

    help me dynamat!!!

    Did my doors today. I have no prior experience with Dynamat or removing door panels from Mustang. It took about 3 hours for the first door and about 2 for the second. One problem I ran into was removing the speaker housing...it is riveted to the door frame. I had to drill through the rivet...
  7. Poopie D

    Help with REMOTE wire!

    Black and Pink wire off the deck is what I used for remote wire....works like a charm (on when ignition is on)
  8. Poopie D

    help me dynamat!!!

    Did you take off the factory soundproofing before you dynamatted or did you leave it in there?
  9. Poopie D

    Amp under rear seats??

    I was thinking about installing my amp (alpine m500) underneath the rear seats in my 02 convertible. I may have to cut off some of the foam on the seating surface to get it to fit. I was wondering if anyone has done this and if anyone thinks it may be too hot under there....the amp will be...
  10. Poopie D

    Hooking up subs to mach460 HELP!

    I just installed subs into my 02 convertible a week ago. Not too hard, you have to pull out the rear seats and tap into the green and black wires that run into the speaker inclosure. I ran the remote wire off the black&pink, wire coming off the deck and I ran the ground wire to the seat-belt...
  11. Poopie D

    mach 460 replacement help

    Just wondering how you added the sub to the mach 460? Do you know what wires you tapped into for the line level converter?
  12. Poopie D

    Got my Mach 1000 amps...need help!

    Ok... I got four Mach 1000 amps from the wrecker...with the wiring harness....no subs no amp rack. I was hoping that I would just be able to plug them into the Mach 460 and pick up a nice pair of dual voice coil subs and throw it all in. Not quite.... We all know that you can buy the...
  13. Poopie D

    Excuse my ignorance, But I could use some advice

    Check out this link: http://www.crutchfieldadvisor.com/reviews/ISEO-rgbtcspd/mustang_install.html By the way, you will need the wiring harness that came with your Pioneer deck or else you will be SOL. My understanding is that you cannot buy these anywhere else but from Pioneer...
  14. Poopie D

    Don't laugh....

    Is it possible to convert an automatic mustang to a 5 speed (2002) without too much effort?
  15. Poopie D

    Black Ford Oval Emblem?

    You can try these guys: http://planetauto.homestead.com/emblems.html
  16. Poopie D

    Mach 1000 questions

    Has anyone out there added the Mach 1000 after they bought their car? I would love to know how you think it sounds. I know that I am not going to get "better than aftermarket" sound out of the system...I just want a little more bass without losing the stock look and feel.
  17. Poopie D

    Mach 1000 questions

    They are only 80 bucks...I will guess I will try to hook up and see...I can always sell them on ebay if they don't work
  18. Poopie D

    how to remove decals from car body?

    you may wish to try "Goo Gone" or "Goof Off" I would try Goo Gone first, as it is citrus based and should not harm the paint...I don't know for sure though
  19. Poopie D

    Bbk Cold Air Kit

    I did not use any sort of gasket or screen when I installed mine...seems to work well. Should I go back and install a gasket?
  20. Poopie D

    Mach 1000 questions

    Hi everybody, I am new to the group...just bought a 2002 GT convertible and am very happy so far (8 years ago I had a 94 and I missed it!) Anyways, I was considering purchasing 4 mach 1000 amps from a friend...amps and wires only, no rack or subwoofer. My questions are as follows: -Do I...
View older results
Top Bottom
Back
Forums
Menu