Search results

  1. blown93feature

    Powdercoating Done..... Impressed !!!!

    well chaz it looks like i'll have to step up to the plate and say that it looks like A MILLION BUCKS...you'll have to show them to me tomorrow when I see you. :nice: see ya,your...
  2. blown93feature

    No Spark!!

    It has to be something thats obvious or just stupid.I would go over and trace my steps check for wires that are not tight or coil wire not on all the way.I found that things that are the easiest to be overlooked are the reasons they don't start again.
  3. blown93feature

    No Spark!!

    I read that you did no mods that could have done this.What exactly have you done(anything at all) except replace parts that you thought were bad.Does your battery have a good charge?I started my car yesterday for the fiirst time since december and It was a little weak and did not want to start...
  4. blown93feature

    AODE

    I have to say mickey took pretty good care of me,I got the tranny(extreme)aod with all possible upgrades,3000stall non-lockup,solid imput,manual valve body,sfi certified steel flywheel,24gvw trans cooler,temp gauge+shipping for 2,398.50.The converter is 700 alone this trans to build would cost...
  5. blown93feature

    AOD/kickdown help

    The only true way to adj that tv cable is with a pressure gauge that attatches to the tranny on the pass side.If you are experiencing short shifts it's to loose and your not building proper pressure at the right points which is why that tv cable exsists. If i'm not mistaken you have to put...
  6. blown93feature

    POLL: which weight oil do you all use???

    I use 15w50 full synthetic mobil 1.The oil pressure at idle is around 45 no matter what temp.
  7. blown93feature

    Non-Stock Coolant Overflow Tanks -----Check it out! :)

    So I guess the one I put together for 40 bucks isn't what you were looking to do?I don't know how much cheaper you could do this and have it look race like this one,plus functionality.
  8. blown93feature

    Aluminum flywheel, who's and how light?

    this may be true with stick cars,I don't have alot of expierience with modding them,but for auto I would go with an sfi approved steel there is no better way with inertia than steel.True about weight factor theory but I found better results this way.J.W performance has there sh** together when...
  9. blown93feature

    Non-Stock Coolant Overflow Tanks -----Check it out! :)

    This is what I did, I bought the race only can which normaly is used for drag cars that don't car about having overflow returned to the system they would just drain the tank.I ran the overflow tube to the bottom side so when the coolant cools it will be drawn back up from the same braded line by...
  10. blown93feature

    What was the first year of body stile before the fox body?? got money on this one!!!!

    I don't think so, I have a 93-1/2 stang and there was a 92-1/2 stang as well.There is no 94-1/2 stang. :nice: The 94 was the first year of change and it's not a fox body either,sn to be exact and it's called the sn 94 and 95 thats it.
  11. blown93feature

    Car running hotter than it should..

    your best bet I believe is 75/25 with water /water wetter no antifreeze.That should put it where you want it.all the antifreeze really does is prevent the water from freezing up in your engine in the winter months.
  12. blown93feature

    guys with 347's post combos and RW Horse power please

    A/4 block canfield stage 3 heads hogan intake,solid lifters,unspecified cam,t-trimw/cog belt non intercooled,one hell of a fuel system,tremic 5 at the time, made 800rwh.We are going to victor jr's stage 2 with 8,000 rpm springs and hydro cam.The other change is a built c/4 thats in the car now...
  13. blown93feature

    Where is my coolant going?

    put a tester to the radiator,this will tell if you are putting exhaust gasses in the fluid if it turns purple you have a blown head gasket.I would almost bet thats the issue. Does the temp spike at all? Have you taken the cap off and just allow the engine to come up to temp and wait to see...
  14. blown93feature

    2 sec or less 0-60ft guys come in !

    well I think I get the prize for the worst yet on this thread.The last time I ran was on the last day the track was open last year.I have a 3500 lb vert with stock suspention sway bar still attatched and at the time of the run I had the factory aod, DR, 373 gears.I believe the only thing I had...
  15. blown93feature

    How Much Power Will This Thing Have?(Need a Estimate To Order Injectors)

    just to give you another example to work from I have 30#s with stock fuel system with the exception of intank 255 and inline 255.The blower is at 8 to9 psi.I have no fmu and no chip and no aftermarket fpr.The car runs great with this set up.Don't get me wrong,the balance of the fuel system would...
  16. blown93feature

    One less competing for new Stang.....

    I read through this whole thread before I finally broke down like a child and lost my composure.I don't understand how life would seem to throw this type of crap at somebody that has a very deserving right to a full life.I mean there are people that abuse their bodies and commit bad acts on to...
  17. blown93feature

    lets see some white and yellow stangs

  18. blown93feature

    Trigger wire for inline fuel pump?

    I believe if im not mistaken that the triger wire your looking for is under the drivers seat in the floor pan.There should be a relay in there.
  19. blown93feature

    How does teh overflow work?

    no problem. :nice:
  20. blown93feature

    How does teh overflow work?

    If you have ever noticed that when the car is running the fluid passes by the filler oppening for the rad.When the system is up to temp and the pressure increases due to air and rising temp which causes the fluid to expand than it expells the overflow to the overflow tank by the way of the...
Top Bottom
Back
Forums
Menu