Search results

  1. E

    another pro50 install question

    Dude, DON'T CUT THAT BOOT! You don't have to. I pulled the dust boot off the original shifter and put it on the Pro 50. It's a little tight, but it will fit. I then installed the "floor board" boot (uncut, of course) over the shifter handle. I pulled it down 'til the shifter hole nestled...
  2. E

    Is it really worth it?

    "There seems to be a never-ending supply of every "bolt-on" you can imagine for these cars. They all seem to give you 5-10 rwhp or maybe a little more or less. They cost so damn much money that I started adding it up. It worked out to be an insane amount of money for little horsepower. Why...
  3. E

    Hi guys new member

    A red supercharged mustang GT convertible. Dude! You're, like, livin' the American dream! Welcome to Stangnet. I'd bet you could get all kindsa info on the poweradder forum, so check it out!
  4. E

    One less competing for new Stang.....

    An oncology nurses prospective I was an oncology nurse for over three years and return to it occasionally. I have seen "it" more times than I can count. You are doing well. Dealing with a terminal diagnosis is something that you can't prepare for. It's a frustrating alien experience. I think...
  5. E

    Magnaflow Catback Drone Question

    Well heck, I don't know what is going on with your ride. I have a Magnaflow catback on my 03 vert and have no drone at highway speeds. Just a righteous rumble through the peddles with 1/4 trottle acceleration from 2-3k. But none at cruising speeds. I have read of people combating the...
  6. E

    What kinda rollbar do you have in your vert?

    Well, I'm thinking seriously about a roll bar for my vert, not a light bar or show bar but a real roll bar/four point cage. What kind does everyone else have? I want to actually use my back seat. Any pics would be fabulous, just fabulous :) !
  7. E

    Ordering Kenne Bell for the 03 Cobra

    600 hp...Well that's just great...next you'll be telling us you're dating a hot redhead with a taut little butt mounted four ft from the ground...jeez. :jester:
  8. E

    Pro 5.0 Install

    Double jons shifter would be sweet too.
  9. E

    Pro 5.0 Install

    Yup, dude yours is probably ok. When the tranny is under load it is harder to shift. I've been telling a lot of people about the kona racing handle at www.konaracing.com. It's cheap, gets the shifter closer and hasn't broken yet (and that's saying alot, by the way I shift :p) Just click on...
  10. E

    Magnaflows or Magnapacks for Bullitt Mustang?

    If I were you I would be VERY careful and remove and SAVE the factory muffs, preferably keeping the entire factory catback uncut. Those pipes are bitchin' and will soon be legendary. I say again TRY TO SAVE THEM UNMOLESTED AND COMPLETELY INTACT, Even if it means pulling the rearend to do it...
  11. E

    Magnaflows or Magnapacks for Bullitt Mustang?

    *Sorry, this is a duplicate. how the heck do you erase and double post anyway?
  12. E

    Questions about weld-in subframe connectors

    Okay, in the next month or two I will be buying and installing some full-length sub connectors on my vert. Do I need to lift up my carpet before I weld them in? I'm wondering if the welds are only 1 inch each spaced by one inch, what are the odds of me scorching the carpet? I don't...
  13. E

    Rearend Newbie.

    Rearend Newbie, eh? Must...fight off...urge to be...smarta$$... Must not...make...prison references...:stick: :D
  14. E

    Tri-Ax or Pro 5.0 Shifter advise

    I bought a pro 5.0 from Kona Racing at www.konaracing.com. It came with a steel handle that is the same shape as the triax handle. The shifter with the handle goes for like $179 plus s&h. Warning! If you do order the shifter from Kona you will not get the "stock" pro 5.0 handle too, only...
  15. E

    C&L Plenum? Why buy a throttle body also??

  16. E

    Reichard Intake - pictures and write up!

    From what I've seen in the mags, it doesn't help alot. Most of the reviews I have seen have been N/A. It looks like it would be a good manifold for blowers tho'. Forced induction would make up for the intake velocity lost by the short runners. I also think forged internals would make the...
  17. E

    Autometer Lunar Cluster

    :stupid: It's really tempting to put something so flashy in my car (esp. with a vert), but if it offers no increase in accuracy, I just couldn't see it. I remember when autometer actually though increased accuracy and resolution was important.
  18. E

    help with mach grill delete

    Hollleee Sheep'Kiss Me''Kiss Me''Kiss Me''Kiss Me''Kiss Me'! It says I'm a "senior member"! Wow. Bitchin'.
  19. E

    help with mach grill delete

    It soulds like you may have gotten one of those grill delete kits that only come with 2 parts; the pony and the black U-shaped piece in the front. The better kits also come with a black piece that goes behind the pony. If that is the case, I guess you could go to the Ford place and order the...
  20. E

    $500 to spend need some advice

    :stupid:
Top Bottom
Back
Forums
Menu