Search results

  1. MyCARneedsHelp

    Mass Air Conversion NO START

    i thought i didnt need to switch pins if i changed the whole harness??
  2. MyCARneedsHelp

    Mass Air Conversion NO START

    its a harness that has air bags and i think the dual dash . Would that be the problem???? is there any way i can hook up my speed density harness and just cut the MAF Plug and wires off the other harness then??? i really need this car running by tomorrow other wise i have no ride to work and...
  3. MyCARneedsHelp

    Mass Air Conversion NO START

    oka i hooked up my speed density computer back up and it fired up but ran like crap, like it has a huge cam but it doesnt . It also backfired and ran RICH as heck it was so bad it was burning my eyes. I dont know what to do , can someone give some advice?
  4. MyCARneedsHelp

    Mass Air Conversion NO START

    :nonono: oka so i hooked the pump to a switch and it goes on and when i start the car it jumps up to 5000 rpm then bogs for a second then dies. I checked the fuel pressure and its at 38 and drops when i hit the gas. The only way it will stay running is if i pump the gas... also i hear a noise...
  5. MyCARneedsHelp

    Mass Air Conversion NO START

    ok so i searched and i followed the Tmoss Diagram and its not starting. I dont even hear the fuel pump nor the fuel pump relay..... I may have the coil wires screwed up but i cant tell its hard to read that diagram. Also there is a wire coming from the MAIN harness to the coil area that was cut...
  6. MyCARneedsHelp

    Video of my car

    Well i worked on my second vid today and took ur guys advice to do a better burn out..... i noticed that my tire is really balled and there arent any more lines in the mickey et streets... is that a bad thing? its completly flat now but the tire is stil holding air:lol: :lol:
  7. MyCARneedsHelp

    Video of my car

    LoL :lol: So i cant go beat the **** outa my car its raining. That kinda pisses me off Edit reason: yuck i hate my signature
  8. MyCARneedsHelp

    Video of my car

    Mark89coupe: that was a 95 s10 with full exhaust, chip, ud pulleys, cold air, & some other crap . I think it sounds horrible. I HATE the sound of it Dan88_5.0: ive been going through a lot of problems with this damn car laltey. I just built it from the ground up. I found it as a shell in...
  9. MyCARneedsHelp

    Video of my car

    Thanx purple87lx it only has a few little bolt ons and so on.... - Edlebrock upper/lower mani - Ford underdrive pulleys - 3:73 gear - Holley 190 fuel pump with adj regulator - Mac cold air - Bbk Shortys with a headman offroad h-pipe ( no cats ) - Electric fan with 160 thermo - Taylor 8mm wires...
  10. MyCARneedsHelp

    Video of my car

    I had them pushing it side to side cause my posi is burnt out. I can do better burn outs but i just paid 600+ for new rims and tires and i wasnt about to f'em up. Im gunna enjoy them expensive @$$ tires. That was my first vid ever made, got any suggestions for the second? im working on it now...
  11. MyCARneedsHelp

    Jegs water pump...

    Anybody had any problems? im trying to cool my motor down a little and these "flow 40 % better" . I dont have 200 bux to spend on one and i think mine is going . Also whats the deal with the " reverse rotation"?
  12. MyCARneedsHelp

    Video of my car

    yea our small little town has grown to the size of chicago in 2 years i accually had to drive to oswego almost to do it. We were just crusin at first then my buddy had a bottle of water and i was gunna run it over then we ended up makin this . :lol:
  13. MyCARneedsHelp

    Video of my car

    try http://vids.myspace.com/index.cfm?fuseaction=vids.individual&videoid=680795381&n=2 he had fun just goofing around, there isnt much to do out here so its kinda nice to have a camera somtimes. :)
  14. MyCARneedsHelp

    Video of my car

    oop lemme see what the deal is . Sorry
  15. MyCARneedsHelp

    Pics of My Baby for BOTM

    4 looks really nice.
  16. MyCARneedsHelp

    Video of my car

    yea i got bored so i went out to screw around and for those out here who want to do the same. If you notice i did this on a backroad were there isnt any pedestrians and children running. Please be carful . Use your brain . Car is pretty stock with a few little bolt ons, 87 octane and windy as...
  17. MyCARneedsHelp

    Where should my timing be? :(

    thanx for the links, even though my problem isnt fixed you gave me great info THANX A LOT !!!! :D
  18. MyCARneedsHelp

    Where should my timing be? :(

    the ect, and act are new ....:nonono: also did a search and couldnt find how to test it with a light or anything. Anyone have the link?
  19. MyCARneedsHelp

    Intake upgrade on SD car

    Well i have a sd and i changed mine . I have the Edlebrock upper/lower mani and i have no problems. It used to surge but then i cleaned my IAC and it was fine... i would say your good to go from exp. :nice:
  20. MyCARneedsHelp

    Where should my timing be? :(

    yea i accually saved this mustangs life. Someone is Oswego tourched it, pulled it with a truck, ripped every piece of it off just to do it with no intent. I put all the wiring in, rear end, brake lines, fuel lines, motor,trans,k-member. ALLLLL OF IT. Now im just trying to work the bugs out, as...
Top Bottom
Back
Forums
Menu