Search results

  1. blown65

    Traction bars

    Traction masters are great on a low power slug. Otherwise they bind and the rear does exactly the opposite it needs to to get traction. Caltracs are definitely the way to go for street and drag performance. Even my car on the street gets awesome traction with the drag radials.
  2. blown65

    68 Mustang over-heating after upgrades

    5.4 rod
  3. blown65

    68 Mustang over-heating after upgrades

    My 14-1 motor had 223psi cranking. I dont remember what the 10-1 motor had.
  4. blown65

    68 Mustang over-heating after upgrades

    Our 10-1 347 I ran 18 degrees initial advance and 34 total at 3000 rpm. 34 degrees locked out on my 347 14-1 motor.
  5. blown65

    Radiator with electric fan best?

    Yes, I run an electric fan on my car and an electric water pump.
  6. blown65

    Radiator with electric fan best?

    X2, I think most ppls issues end up not being the radiator but the fan they choose to skimp on. Mines just a durale 16" but it moves lots of air.
  7. blown65

    68 Mustang over-heating after upgrades

    I know many have posting checking timing, but what is your timing at Idle cruise rpm 3000-3500 rpm
  8. blown65

    Rear End Ratio?

    We run 4.56's with our AOD car and its still 2500-2600 at 60-65mph. Not too bad IMO for a classic. However its set up for the rpms that motor sees.
  9. blown65

    Rear End Ratio?

    At least 3.73's. Personally I'd probably run 4.10s cause even in 5th your going to have nice highway rpms and in the lower gears great performance. 1st is going to be kinda short though with the 4.10s depending on the gearing of your T5.
  10. blown65

    Speedhut Gauges/Tachs???

    Very nice 66Runt
  11. blown65

    Speedhut Gauges/Tachs???

    Nope, pretty easy.
  12. blown65

    Speedhut Gauges/Tachs???

    That is all of their gauges. Only one issue I've had and its not the gauges I don't think, I have some interference going on with my speedo LCD portion and the ignition box. Its fine till the car starts so its maybe a ground or something. It was fine till I put the MSD Digital 7 box in, with...
  13. blown65

    Speedhut Gauges/Tachs???

    I have the revolution series in my car. 8 guages and the bezel and was into it about 850 bucks. Just watch for sales they throw with the 15% off.
  14. blown65

    rear suspension mods for big wheels?

    X2, mine had no more than that and never rubbed on the inside.
  15. blown65

    Guys over 6 ft tall. Headliner and seat options?

    Doing anything to the headliner IMO wouldn't help as much as just modifying under the seats. There is a good 3-4" rise you could shorten right there. Friend of mine took his entirely out since he is 6-4 or so.
  16. blown65

    Stock times for the ponies?

    Sorry, guess I missed that part. Still slow as ****. Why not pick out Real with his post with multiple non C code cars.
  17. blown65

    Stock times for the ponies?

    Our 67 GT350 with the stock motor and Dual 4's ran 15.3.
  18. blown65

    Blown65, Hows the project??

    lol, buying something like that would cut into my car fund. heh
  19. blown65

    Blown65, Hows the project??

    Got quite a bit done today, most all the interior is back in except for the passenger side where some wiring has to run to the trunk. Fuel cell and fuel pump in, gotta get some rubber or something for isolating the pump but for now its fine. Few pics, ignore the mess of battery wiring and...
  20. blown65

    Blown65, Hows the project??

    got mine all ordered and on the way. Ill let ya know how it works bout, but I'm sure it will be just fine.
Top Bottom
Back
Forums
Menu