Search results

  1. Funanin

    fuel rail bolt

    not as easy as it sounds... mine is actually cracked from a broken off bolt. I been driving around with 3 bolts now on my GT40 for quite some time, and plenty of rip down and rebuilds. You can do it with 3, just make sure the rail is tight and pushed down as far as it can go with those...
  2. Funanin

    destroked 302?

    put 429 crank in a 460, then u have strong block, and minimal stroke. You can rev the hell out of it and also make tons of power/tq. :nice:
  3. Funanin

    Timing A/R on your cam?

    I just put an E cam in with 1.7 rockers and im putting the GT40 X303 aluminum heads on with GT40 upper and lower intakes. My question is, I bought a new FMS timing chain set and it has adjustable notches for the small sprocket that goes on the crank to either advance or retard the cam in degree...
  4. Funanin

    Whats The real deal with the gt-40/ cobra inatke

    ya, GT40 with a nice lower port job from tmoss would be the way to go.
  5. Funanin

    I Was Owned By Ls1

    i agree, let it go. when im feeling down i look at the percentage of cars on the road that can beat me, next to the percent of cars I can beat... its cheered me up enough to keep my car so far.
  6. Funanin

    mini starter question

    umm i have a 93 lx and it has a regular size starter, because i just had to replace it... i dunno how big a regular one is but if its any bigger than the one i have then it would weigh enough to slow the car down.
  7. Funanin

    I Was Owned By Ls1

    LS1's with literally just gears are fatal to most stangs, dont sweat it get some sort of boost and/or more cubic inches and you will be fine.
  8. Funanin

    73mm caliper upgrade on 88 GT got a ? about MC

    i work for ford and get things 10% above cost. you all should look into that.
  9. Funanin

    Whats The real deal with the gt-40/ cobra inatke

    they are the same inside and the GT40 is not rated at 75 hp more i dont know where u heard that from. Neither one adds more than 20 hp to a stock motor anyway. You really wont tell a difference between the two performance wise. If you are going for looks, then its GT40. I think they are...
  10. Funanin

    Can't find brake pads for my 73mm calipers?

    hmm... the guy might have just been an idiot like you said... I work at the distribution warehouse for ford, so let me look in the computer tomorrow for the 88 crown vic police pads and I will check to see if they are the type you need or if that guy was right.
  11. Funanin

    spark knock question

    didnt know that, thanks hissin.
  12. Funanin

    spark knock question

    detonation as far as i have seen is only there or not there. What you can do is have a buddy rev your motor up to about 4 or 5k and hold it there for a few seconds while u have your head under the hood and listen for any sort of pinging. If it is there you will hear it. Also it usually doesnt...
  13. Funanin

    anyone know msd igniton hp gains

    i spent about $1000 on new ignition equipment from MSD and I must say I did see a difference. Not that it was anywhere near the feeling of $1000 worth of engine mods, but the car idled way smoother, and I could gap my plugs to .060 and pull HARD up to 6k without any blowout whatsoever. Which...
  14. Funanin

    O2 Sensor ?

    The difference is, one is the original type, and one came out in the later 90's which is a slimmer design and tends to last a little longer than the original ones. The one you want is the DY-605, that is the newer one. The DY-606 is the older style. If you want I can have them shipped to you...
  15. Funanin

    5.0 front brake upgrade kits?

    probably not dude... someone would have said something. I am gonna try this in a week or two. I work at a ford warehouse so I can get these calipers real cheap from motorcraft if anyone else is interested PM me and I'll get you a price.
  16. Funanin

    Question about Hood Clearance w/Intake Spacer

    I have the tall valve covers as well because of the 1.7 rockers. I also have GT40 intake which I tried to put on with a 1 inch spacer and it would not even come close to fitting. A stock intake may be different. I had to double stack two 1" spacers together just to clear the valve covers...
  17. Funanin

    5.0 front brake upgrade kits?

    I work at a ford warehouse so I was just going to get them from motorcraft. I guess I will get the ones for the 88 crown vic police. What other changes will I have to make once I get them? Should I get braided steel brake lines or I heard you have to adjust the proportion valve because of the...
  18. Funanin

    5.0 front brake upgrade kits?

    which ones? so yea everyone says 91 lincoln mark 7, 88 crown vic police, 86 svo, ect but when I look them up on motorcraft.com, they are all different part #'s. So which one do I want? They are obviously all different, which means some are better than others or fit better. :shrug:
  19. Funanin

    5.0 front brake upgrade kits?

    whats this about putting bigger calipers from a lincoln on? who has done this and what year/model can I get them from?
  20. Funanin

    5.0 front brake upgrade kits?

    good thread man. I just got new oem calipers from ford and cross drilled slotted rotors, with EBC green stuff brake pads. Works wonders better than stock stuff. AND the EBCs put out extremely low brake dust.
Top Bottom
Back
Forums
Menu