Search results

  1. Nazman

    Hooker LT vs. MAC CC LTs?

    What do you guys think? I have one of my JBA (passenger side) flange crack all the way. I'm not going to go to the pain of swapping it and keep the ST style. Have you guys seen the new MAC LT CC? Any one running it. If you had the choice which one would you get? The MAC are about...
  2. Nazman

    IRS to Solid Swap, One Question!

    The donor vehicle is an 04 GT 5 speeds, 4000 miles. Now my question is: Does Not have TC nor ABS!!! How is that going to afect my breaking system? Will my ABS still work? Naz
  3. Nazman

    OBD II scan...p1443

    Assuming that your Cobra is a 1996 the code response I have is: EVAP Emission Control System Control Valve Malfuction Here is some generic info on what the EVAP system does and how it does it. EVAP Read on....good info. Naz
  4. Nazman

    Some Clarification: '03 Mach 1 vs '01 Cobra

    01 Cobra vs. 0X Mach 1 vs. 99 Cobra: Mach vs. 01 Cobra 99 Cobra According to the dyno the Mach is making about 215RWHP @ 7000RPMs and according to my AFTER FIX sheet the 99 Cobra is making about 250RWHP @ 7000RPMs.....the Mach makes peak HP o/a 5000RPMs and the 99 Cobra makes...
  5. Nazman

    Steeda vs Magnaflow

    That is very correct. Same system. Here is a quick pic of my Magnaflow and Dr. Gas X with Cats. Naz
  6. Nazman

    Help with SC 97 Cobra Fuel System

    Have a friend with a SC 97 Cobra who is having some problems with his fuel system. I like to know if anyone has had this problem or have an answer to this: "ok, here is the main problem. I can't get below half a tank of gas without my car dying. I can only drive about 60 miles before I...
  7. Nazman

    99 Cobra VS 2001 Cobra

    NP, You will be surprice how many Bolt-On Cobras have 320+RWHP. Here in Stangnet there are quite a few. Check out this at Modular Fords NA Cobra RWHP/TQ Listings Naz
  8. Nazman

    99 Cobra VS 2001 Cobra

    Underated dyno? You mean that it needs to be SERVICE and CALIBRATED? Any ways, my car has been dynoed in several diferent dynos always displaying good numbers. By the way, just got the car re-dynoed over here in Germany yesterday, on another diferent dyno and it showed a nice 329RWHP, that...
  9. Nazman

    330 rwhp &330 rwtq 99 cobra NA?

    See Sig. You will need a P&P intake. Naz
  10. Nazman

    330 rwhp &330 rwtq 99 cobra NA?

    See Sig. Naz
  11. Nazman

    Messing Around In Germany...

    Tfritz, I like the WMS CAI a lot. As you may know, I was runninga Densecharger and a 80mm Pro-M and worked great, but I wanted to try something diferent and got the WMS. The car runs great, and the top end is much better. I did some VERY INFORMAL testing utilizing a Mr. Dyno and...
  12. Nazman

    Messing Around In Germany...

    It's good over here, Autobahn, great beer, GREAT BEER and GREAT BEER! Naz
  13. Nazman

    Nazman in 5.0 Magazine

    Hey Tks! :D Contratulations on your selection as a Warrant Officer. Lot's of new responsibilities and lot's more work, that is for sure. We, WO's are far and few and if you have been selected thats means you must be squared away. 333RWHP/331RWTQ, may be impressive for shorty headers, no...
  14. Nazman

    Messing Around In Germany...

    Putting new tires so the old ones had to go in glory! :D Having Fun In Germany! Naz
  15. Nazman

    Who Own #1969 1999 Mustang Cobra...

    ...Coupe? If you do, please let me know your Color combo and may be the last 5 of your vin number. Thanks Naz
  16. Nazman

    New to the boards. Bought 1999 Cobra

    As far as the WMS goes, on MY CAR with MY MODS the FOTP is there. It replaced a Densecharger and 80mm Pro-M and I can tell the diference in the TOP end. I did some very in-formal testing with a Mr. Dyno just for the heck of it and the Performance computer confirm it mild gains from about...
  17. Nazman

    Spark Plugs

    Ran the Bosch Platinum Plus 4s for about 2 years with no problems great plug! About 3000 miles ago I switched to Motorcrafts Copper and the car did not like them at all. Missfired at the top end, gas millage suffered and ran like a$$. I switched right back to the Plus 4s and the car ran...
  18. Nazman

    IRS TO SOLID Swap Questions

    Gentleman, I hate to take some of your busy time but I have several questions regarding an IRS to Solid (97 Cobra) swap. I'm stationed in Germany so my options are very limited. As of right now I have access to a 97 Cobra solid along with all the suporting parts (stock springs, shocks, DS...
  19. Nazman

    99 cobra where to start

    Thank you for your service brother! :flag: I just came back from there my self about 6 months ago. Mods: 4.30 Gears Springs Bushings PHP Brace BFG DRs Aluminum Flywheel P&P Intake Dr. Gas X Cat Back of your Choice Shifter (Steeda/MAC RC) WMS CAI/PRO-M 95 MAF Chip (JMS)...
  20. Nazman

    extra cash!!!

    I'll have to disagree with that. The Chip will be a great addtion if he'll have some more mods, i.e.: Headers, Intake, MAF, etc. For the very mild mods that he is looking at he will be ok with the TA. For the money my recomendation are: Steeda U/D Pulleys (o/a $150.00) Steeda TA...
Top Bottom
Back
Forums
Menu