Search results

  1. E

    anyone interested in a new watts link and a 3 or 4 link in here

    We are in MI and PA. Development is done in MI. Thanks....Mike
  2. E

    trilink and panhard?

    Sorry....we have all the demo cars we need.....:) With regards to the exhaust change. On the passenger side the axle tower interferes with the tailpipe. You just need to change the geometry of the tailpipe that hoops up over the axle. It's a simple change any exhaust shop can do...
  3. E

    trilink and panhard?

    We are really out of MI. I live in PA and work out of my house. My fiance actually lives in bethlehem, so if I am ever up there in my black mustang, you can check everything out. You are right about the exhaust re-route. The stabar, as well, but everything is included for that. If push...
  4. E

    trilink and panhard?

    There will be no noticebal sounds coming from the watts. It is pretty quiet, even in competition form. You may get a little NVH from the TriLink, but again nothing horrible. I run the Watts and TriLink and with the radio on I don't notice a thing. The actual crank pivot on the watts moves...
  5. E

    trilink and panhard?

    What fitment problems? What needs to be re-routed? There is only a slight issue with passenger side tailpipes. Not unlike some of the problems you find with a panhard rod. Beyond that, I am not sure what else needs to be rerouted, or what makes for a difficult install... Thanks....Mike
  6. E

    opinions on this suspension setup

    This thread may help you out: http://forums.stangnet.com/showthread.php?t=528806&highlight=evolution Thanks...Mike
  7. E

    List some aftermarket manufacturers for the Mustang...

    Can I shamelessy plug Evolution Motorsport - www.evolutionmsport.com - Suspension/Chassis.... Thanks...Mike
  8. E

    Best Subframe Connectors?

    Shouldn't be a problem. The "X" portion of the brace sits behind the tailshaft. Thanks...Mike
  9. E

    3-Link Rear suspension?

    You can check out page 20 of our Watts instructions. That should give you a general idea of what the exhaust looks like in place. http://www.evolutionmsport.com/Watts-website.pdf There was a thread on corner carvers that showed some pretty nice pics of the exhaust mods, but the pictures...
  10. E

    3-Link Rear suspension?

    The approximate release date of the three link will be somwhere in the next two months...Most likely the early march timeframe. As for your exhaust, all exhaust systems will need the same type of modification over the axle. If your tailpipes are larger than stock and your car is lowered you...
  11. E

    3-Link Rear suspension?

    You do not need to scrap your exhaust pipes with the watts. They just need a few mods. Mike
  12. E

    3-Link Rear suspension?

    OK. Think of it this way. The a watts and a panhard bar perform a similar function basically. The three link and TA perform similar functions. If you use our three link you do not use your upper control arms, you get rid of them. To use a three link you will need some form of lateral...
  13. E

    3-Link Rear suspension?

    We will actually be coming out with some modular/adjustable billet aluminum LCA's, as well as non-adjustable/modular billet LCA's. We have a an adjustable stabilizer bar that is basically a stock replacement bar that covers rates from the GT to the Cobra. We will also be offering a frame...
  14. E

    3-Link Rear suspension?

    Obviously, we are partial to the Watts link as a starter part, then you could follow that up with the three link. If you go to our website you should be able to poke around and get a general idea of what the watts can do for you. There is also a brutally long post on the watts on...
  15. E

    3-Link Rear suspension?

    The Three Link will not require any exhaust modifications, just the Watts. It varies from car to car, but basically the tailpipe on the passenger side of the vehicle needs to be modified where it loops up over the axle. In some cases you can simply dimple the tailpipe. We offer a section of...
  16. E

    3-Link Rear suspension?

    Here is a link to the three-link: http://www.evolutionmsport.com/evm-Product-3link.html These are old prototype photos, but it should give you an idea of how it mounts in the car. The center link on the latest version is billet aluminum and all the bends in the cradle tubes are mandrell...
  17. E

    3-Link Rear suspension?

    The EvM 3-Link will not require dumps, nor does our Watts link. Furthermore, no mods will be needed to the floor. If you are interested, it should be available in the next month or two. Thanks....Mike
View older results
Top Bottom
Back
Forums
Menu