Search results

  1. S

    question about 87-89 mustang

    I think an automatic and a carpeted dash might negate the mileage factor :D ...and if it's a hatchback that makes it even worse
  2. S

    How much room for improvement? Help

    Vic Jrs are costing a lot of port velocity on that setup.
  3. S

    new stang...need some advice on setup

    stock heads? I wouldn't even get a TB. No larger than 65mm if you really want to get one. For the MAF meter, I'd go with a C&L 73 or 76mm or a Pro-M 75mm. This car was bone stock when you got it? .
  4. S

    What crank should i get? 1000+ hp

  5. S

    question about 87-89 mustang

    run the VIN and see what it is
  6. S

    8.8 traction lok rebuild question

    I rebuild them with 8 clutches and only 6 steel spacers. Usually end up reusing the stock shim on each side.
  7. S

    3" exhaust???

    I'm only going 3" to the mufflers and then reusing my 2-1/2" catback. That's what Kooks and Dr.Gas recommended. I don't know how much torque the poly mounts are good for. I'm not chancing it, I've got HPM solids to put in. JMO
  8. S

    8.8 traction lok rebuild question

    yes, you should have equal shims on each side. did you put 6 clutches in or 8?
  9. S

    subframe

    Yes.
  10. S

    3.73's too much for a built engine?

    we've got a Centralia ~20 miles from here, that's why I wondered
  11. S

    Let update the 1/4 mile list.

    I know I'm in the 94/95 forums, but I'd like to put this in anyway: 92 5spd Notch - 14.94 @ 94.2 (Bone stock, no bolt-ons, no gears, no weight reductions, no advanced timing, air silencer still in the fender, on regular street tires) I just thought it'd be neat to compare to all the...
  12. S

    3.73's too much for a built engine?

    Centralia...which state?
  13. S

    My Intake decision

    Which aspects of the cam profiles makes the TFS Stage 1 better than the Lunati-51027? other than the cost difference.
  14. S

    think 300 rwhp n/a is possible??

    Yeah, you should shutup...J/K dude :D IMO the Windsor Jr's are a lot better than any stock head could ever hope to be. Even with the bigger valves, the runner volume is still to constricting. Plus the Jr's have a much smaller combustion chamber. Kind of you to offer though.
  15. S

    In Your Opinon...

    If you're getting a 347 to start with, I'd definitely want the turbo. Especially for the street. Very stealthy. A high CR 347 will be heard for blocks away, but a turbo 347 would be a nice sleeper. Go to the track and watch the SSO races. When 2 turbo cars run, the loudest thing is the...
  16. S

    gear question

    The used gears should be fine as long as they're out of a factory ford setup. I'm not sure I'd go for used aftermarket gears. All of the factory and FMS gears can be installed with your factory shims. I've seen 3 different guys running FMS gears pull out the trak-loc and put in a spool and...
  17. S

    think 300 rwhp n/a is possible??

    the XE270 and the street heat are quite a bit better than an e-cam and a gt40 setup. Windsor Jr's have 58cc chambers. Raising the CR wouldn't take much. A cam change alone would probably put you near or over 300. I made 280 with my old setup and that was with the stock TB.
  18. S

    351 headers

    I'm thinking 1-3/4 will be a little small for that many inches. Call Kooks and ask. I'm betting they tell you 1-7/8-->2" step headers. Guess it'll depend on your heads and RPM. They sent me 1-7/8 for my N/A 408 @ 7200rpm with AFR 225's. The difference between the Fox & SN95 headers are...
  19. S

    ebay fan, to buy or not, looks good

    2700 can be done with that fan. The Flex-A-Lite Black Magic moves 2800. I got twin 12" s-blades for mine on eBay. Same brand as these. I forget how much they'll pull, but I went with them because they're only half as thick as the 16". If you haven't already been there, you can compare the...
  20. S

    How does this look for a mild 331

    What's wrong with the valve reliefs that are already there? :D That looks like a very competitive price, but I agree with the others: go local. You'll probably spend $250 or so to ship it...and then the first time you have any issues, you can spend it again to ship it back to them. They...
Top Bottom
Back
Forums
Menu