Search results

  1. AdRock

    Need help fast ** easy problem **

    Disconnect the MIL eliminators. Clean all the connections with contact cleaner. Then put some dielectric grease in the connectors and put it back together. Reset the ECU and see if the code comes back.
  2. AdRock

    Tork Tech Kit finally came

    I HATE YOU...... That looks damn good. The end all will be worth your wait I'm sure. Congrats.
  3. AdRock

    Went to install the JLT I bought from a board member and... :(

    Exactly. I couldn't file a claim if I wanted to.
  4. AdRock

    driveline issue question

    Check for excessive play/backlash in the rear end. Check the u joints & the bolts that hold the DS to the pinion. I'm betting on backlash or the u joints.
  5. AdRock

    Went to install the JLT I bought from a board member and... :(

    No ****, I've never read that. It looked like regular painted PVC to me.
  6. AdRock

    Went to install the JLT I bought from a board member and... :(

    I'm the one that shipped this to him. I never installed it on my car. I opened up the box to make sure nothing was damaged when I got it and to make sure all the needed parts were there. Then it just sat in the the garage for a month. So I sold it. It was packed & wrapped up just like it...
  7. AdRock

    A/C cycling alot - and a tiny drip in pass floorboard

    Doublecheck the A/C drain tube on the firewall to make sure it isn't clogged. If the A/C case itself is getting cold enough and the humidity is high enough that condensation forms on the outside of the case and drips then there's a somewhat simple suedo fix. I had it happen one summer and...
  8. AdRock

    Clutch is gone???

    If the clutch isn't making a bunch of noise then the problem most likely isn't the clutch. The cable has probably just stretched. The stock quadrants are plastic and can also start to flex over time. Get a quadrant, cable adjuster, and a new OEM cable. I'd bet money that those three things...
  9. AdRock

    Oil dripping from oil pan plug:Replaced plug, still leaks

    Try getting another O-ring. Also put some teflon tape on the plug threads.
  10. AdRock

    4.6L Coolant Leak- Help

    If there's no coolant in the oil then the pan gasket has nothing to do with the leak. That's just where the leak is running down to and dripping from. Clean the engine off well then let it dry. See if you can find someone with a pressure tester and put some pressure on the cooling system...
  11. AdRock

    My clutch is.......strange

    I had this problem and it was the ****ty plastic clutch quadrant going in & out of adjustment. A Steeda quadrant, cable adjuster, and the OEM cable got rid of all inconsistency.
  12. AdRock

    4.6L Coolant Leak- Help

    Before you pull anything off... Look around the thermostat to make sure nothing is leaking there. Then use a flashlight to look down into the engine valley underneather the intake. There's a coolany tube that runs through there. Then get underneath the car and look up at the weep hole...
  13. AdRock

    4.10 GEARS INSTALLED....HELP DIAGNOSE NOISE

    If you said it was a whining noise I'd say gears. But the noise you describe sounds like a bearing going bad.
  14. AdRock

    door chime

    Not really much you can do. The chime is mounted on a circuit board up under the drivers side of the dash.
  15. AdRock

    Any of you guys use different shift knobs for different seasons?

    I have the bullitt knob and use it year round. The cold doesn't bother me. I always have a small towel in the car so in the summer I just toss it over the knob whenever I park. No scorching of the hand.
  16. AdRock

    Pypes O/R H Pipe...

    If you have chambered muffs then try a MAC Pro Chamber. Great piece. An X will sound like ass with a chambered muffler. If you don't have chambered muffs try the UPR x pipe. I've known a few people that had great luck with them. An O/R UPR x along with a MagnaFLOW catback sounds damn nice.
  17. AdRock

    "Shining" up engine bay?

    Ok, I have to say it. I know what shining is but what is shinning? LOL>
  18. AdRock

    Vortech driveability

    I agree with this. I've seen too many people get an awsome tune only to find out the tuner didn't do much if anything for everyday driveability. If I was you I'd take it to a different reputable tuner and see if they can fix the tune issues becuase it sounds as if the guy now doesn't want to...
  19. AdRock

    30 min pulley install?

    For $30 I'd let them do it. That way if something goes wrong they'll fix it and pay for it. If you mess something up it will probably cost you more than $30 to fix it, especially if you ended up having to take it somewhere anyway.
  20. AdRock

    MIL Eliminators?

    It's true, the rear O2's have no bearing on how the ECM does anything as far as tuning. They are there simply to show the ECM whether the cats are working properly or not. That's it. I'd guess that the difference in how the car feels could possibly be attributed to you changing the fuel filter.
Top Bottom
Back
Forums
Menu