Search results

  1. modulistic

    Modular Fox Swap. Turns Over But No Fuel Pump.

    Doing some reading, looks like if you swap the cluster, PATS gets pissed and will crank but not start. Will try the cluster and report back
  2. modulistic

    Modular Fox Swap. Turns Over But No Fuel Pump.

    I am at the point in my swap where im trying to test run the motor. as the thread title says, It will turn over but im not getting any fuel pump sound or pressure. The entire harness and computer and fuel tank/pump came over with the 2002 4.6. I dont have the cluster plugged in, I dont think...
  3. modulistic

    Help Needed. 89 Dies After 30 Miles Everytime Driven

    we just pack snow around our distributor every 30 miles or so for longevity reasons.
  4. modulistic

    Help Needed. 89 Dies After 30 Miles Everytime Driven

    Spray ice water on tfi next time. See if it gets better for short while
  5. modulistic

    Fox What Hood Is This?

    View: https://www.youtube.com/watch?v=H07zYvkNYL8
  6. modulistic

    Pics

    Which side of the car does the gas line come up from? Im not sure about the early 80's cars, but in late 80s/90s, the fuel came from the passenger side on the V8s and the drivers side on the 4 cylinders. write down your VIN if you want and I can figure out what it is.
  7. modulistic

    Pics

    I like it. except those tail lights.
  8. modulistic

    Brakes The Ultimate 4-lug/5-lug Brake Conversion/upgrade Thread

    yeah, the 99+ axles are longer. 94/95 axles will fit, but I think its going to pull your wheels in a half inch or so.
  9. modulistic

    Bigger Pump And Injectors?

    not really needed unless you are upgrading heads and intake. wont hurt, but I would spend that money on gears or something first. You would also need a calibrated MAF, or a tune to make it work. if you just threw that stuff in there by itself you would probably run rich and throw codes.
  10. modulistic

    Brakes Interior Suspension Drivetrain (income)

    any seats from 79-2004 will bolt right in. Ive even heard bench seats from fairmonts and some T birds will bolt in. not sure about that, and a bench seat will interfere with the parking brake.
  11. modulistic

    Brakes Interior Suspension Drivetrain (income)

    look at the 10th digit on the VIN. (should still be there in the dash) write it down then look here. if its an 84, it will have an E. if its an 85 it will have an F. A 1980 B 1981 C 1982 D 1983 E 1984 F 1985 G 1986 H 1987 J 1988 K 1989 L 1990 M 1991 N 1992 P 1993 R 1994 S 1995 T 1996 V...
  12. modulistic

    Brakes Interior Suspension Drivetrain (income)

    look at the diffs from the back. the 7.5 looks like a circle, the 8.8 looks like a square with rounded corners.
  13. modulistic

    4.6 Swap Underway. Need Ideas To Solve Rear Axle Problem.

    Does anyone know what would happen if I threw the 4cyl springs back in? would it lower the car a bit? would the ride/handling suffer? Im not a track guy, just like driving around on the street/highway.
  14. modulistic

    4.6 Swap Underway. Need Ideas To Solve Rear Axle Problem.

    Thanks, I like the way that looks. heres what the SN95 rims look like on new edge width rear and new edge width control arms. Dont hate it, but dont love it either. I Can see how it would look goofy with fox length front control arms. 5L5, I didnt have to use a sleeve when throwing the new...
  15. modulistic

    4.6 Swap Underway. Need Ideas To Solve Rear Axle Problem.

    I might see if someone selling a set on Craigslist might let me test fit them before buying.
  16. modulistic

    4.6 Swap Underway. Need Ideas To Solve Rear Axle Problem.

    the only buddy I know who has one treats his car like its some one off shelby supercobraviper 2 5000KTRXGTCSLXSVO
  17. modulistic

    4.6 Swap Underway. Need Ideas To Solve Rear Axle Problem.

    anyone know if I can use s197 18 inch rims all the way around with the stock SN95 suspension parts/axle/control arms?
  18. modulistic

    Needing Front Spindle For 92 5.0 What Interchange?

    4cyl spindle will definitely not work. the first part I know for sure is that the strut mounts are way different. but I think the ball joint is different and you would have to use a 4 cyl rotor/brake caliper... probably will have to find one on the internet if the junkyard is not an option.
  19. modulistic

    Looking For Help On Surging Idle. Went Through Check List, But Still Surging.

    exhaust reversion, If you run open headers, exhaust will back-track (at low rpm - low exhaust velocity) and cause 02 sensors lean at idle. in my case, I had two 1/4 inch openings at the bottom of the header flange because the entire midpipe got bent upwards. What I think is happening is you...
  20. modulistic

    Quick Rigging Question

    eh, not really. hot water will melt tape right off. it looks like a hard part... what part is that? I would JB weld or epoxy it. or I would just walk/ride bike to the parts store
Top Bottom
Back
Forums
Menu