Search results

  1. fivemustangs

    Vibrations on first test drive 95 mustang

    I never unbolted the driveshaft from the diff. I only pulled it from the tranny I am supposed to get the car back tomorrow and the dyno guy says that its only pushin 190 WRHP and that is less then it should be with my mods. I was wondering if it could be the clutch or flywheel? Because I am...
  2. fivemustangs

    Vibrations on first test drive 95 mustang

    There is not a vibration with the clutch in or when the car is in netural, just when you are driving down the road and the driveshaft and rearend in turning. The fly wheel is a 50oz and was in a previous car of mine for about 2000 miles and the rotating assembly was fully machine balanced within...
  3. fivemustangs

    Vibrations on first test drive 95 mustang

    I have a vibration while driving down the road in my 95 mustang gt, but not at idle. I have done a T5 swap into my mustang and used a world class t5 from a 96 mustang 3.8 (which I drove before) I switch the bellhousing, put in a pilot bearing. But I did not swap out the drive shaft when I did...
  4. fivemustangs

    These are my mods...what you think?

    Well I went to the dyno the other day and he put it on for a little bit and did a few runs, but still not done. It pushed about 100rwhp without any tuning :rlaugh: (needs a few more hours of work) it also had a vaccum leak or some unmetered air coming in, ran very lean and high idel. But when I...
  5. fivemustangs

    These are my mods...what you think?

    Any other guess's? I took the car to the dyno yesterday and had to drop it off so I might not be getting video footage :notnice: But Im going up wth my old man on thursday and he might be running it then. I plan on adding 3.73 gears within the next month, is that going to help with HP any or...
  6. fivemustangs

    These are my mods...what you think?

    Well thats pretty *****y I always thought that .060 was such a small amount of metal that it did not matter. They didn't mention anything about it making the block weaker when they were performing the bore. But they did sonic test it I know that, they are a good machine shop. I also have forged...
  7. fivemustangs

    These are my mods...what you think?

    its the track heat intake, but I wont be using the nitrous on the dyno, I was kinda hoping for at lease 300hp. why do you say .060 is a bad thing?
  8. fivemustangs

    94 gt shorty headers install help

    There will be 8 bolts on each side connecting the head to the header, also two bolts connecting the header to the H or X pipe remove all these bolts and the headers should come right off, installing the new headers are the reverse put bolts back in....ect. But make sure you replace your header...
  9. fivemustangs

    These are my mods...what you think?

    Well I am going to be taking my stang to the dyno in a few days.....This is my first dyno experience so I am very excited! I just recently re-did the whole car from the inside out, when I took it for a test driver lets just say I was a little disapointed (def. needs a tune) BUT I wanted to list...
  10. fivemustangs

    posting pictures and mods?

    Ok think I got it. Thanks!
  11. fivemustangs

    posting pictures and mods?

    Ok maybe Im just stupid.......but I want to know how everyone post a picture and a list of ther performance mods with all there threads. I feel like im the only one with nothing to give.
  12. fivemustangs

    Name that connector!!

    I looked at all the fuses and they looked good, I also replaced all the fused that even looked like they could be bad. Is there anything between the alternaror and the AMP bulb besides the fuse that could blow or burn out? I dont want to rig it up, I tested it today and it got no volts when the...
  13. fivemustangs

    Power Down

    Nope, def. did not switch the computers, I was waiting for the dyno to turn the aode off for me, I will make sure that I get to the dyno with a trailer. Just took the car out for a little test driver wont be doing that again don't want to mess anyting up. I cant wait til the dyno I am so excited...
  14. fivemustangs

    Power Down

    Well I took my car for a little spin down the road because I couldnt help myself and when I started to excelerate in first gear the car was VERY low on power and then I hit second and it pulled a little bit better but the power was still not there. I have just done a AODE to T5 swap and have...
  15. fivemustangs

    Name that connector!!

    I figured it out today, I tryed the ground and still nothing, so I turned the key to the on position and tryed the red/green wire and there was no voltage, So I spliced into the wire and hooked it to the battery for testing and BAM there was 14.7 volts. So not I am guessing I need to find a IGN...
  16. fivemustangs

    Name that connector!!

    I have been searching a lot tonight and found a good amount of threads with some good info on them. But I also want to know why the alternator is just sending out 11.50 volts while running, right off the back of the alternator black/orange wire nut before the fuseible link? is that the voltage...
  17. fivemustangs

    Name that connector!!

    Ok guys, I need some more anwsers, I went and bought a new alternator today and also a new battery and put them both on the car, then when I started the car and put the voltage tester on the alternator I still got the same reading, about 11.50 So I took it to advanced auto and had them test the...
  18. fivemustangs

    Blinker madness!

    I figured out the lighting, just had to trace back the wires and found a burn out, sodiered them up and was good as new.
View older results
Top Bottom
Back
Forums
Menu