Search results

  1. LRSjmac

    Suggestions on a clutch kit...

    Well, the RAM HDX Clutch will do you just fine! It'll hold up to 400 RWHP so long as you don't run it on slicks. The Flywheel, Rear Main Seal, Pilot Bearing, hardware, & Input Bearing Retainer included in the kit you looked at are all sourced from FRPP & are OE Ford parts. The Clutch...
  2. LRSjmac

    Good OE replacement clutch?

    If you plan on styaing with your posted mods, then the RAM OE Replacement will serve you well (so long as you keep it away from sticky tires:D). If you plan on any more power down the road, it would be wise to go ahead & step up a level to our SVE Mongoose Clutch, or even a step further to the...
  3. LRSjmac

    Suggestions on a clutch kit...

    Well, the RAM HDX is a great clutch, but it may or may not be right for your application. Please tell me about the modifications to your car & include any future mods you're planning on. Also, do you drag race often on a full slick?
  4. LRSjmac

    Bullit or Eibach Suspension, Convertible

    Well, the FRPP Bullitt Suspension Kits are on backorder until mid June due to a sway bar supply thing. The Eibach Pro-System Plus kits are nice & if you don't want a the full lowering, add in some Urethane Spring Isolators as they typically add between 1/8" & 1/4" back in ride height.
  5. LRSjmac

    Need advice of 86 GT Front Bumper Cover

    Molded in original tooling means that the bumper cover is molded in the exact same tooling that was used to make the Ford original ones back in the day. Exact same, not just one like it. Fit & finish are OE quality. You are never "stuck" with anything you buy from us. Our customer...
  6. LRSjmac

    Need advice of 86 GT Front Bumper Cover

    Unfortunately, that was the only 87-93 Mustang LX Front Bumper Cover left after Ford discontinued the original. We didn't like it either, but there were no alternatives. Luckily there is one out now that is molded in the Ford Original tooling, licensed by Ford, & features the MUSTANG lettering...
  7. LRSjmac

    Ford Racing radiator. What modifications are needed?

    MustangLX-5.0, I have one in my 93. I left the rubber isolators in the bottom & removed them from the top. The upper metal brackets needed some tweaking for a solid fit. There is also a plastic locating pin (upper right in the pic below) that I cut off as well. Mustang 79-93 Radiator...
  8. LRSjmac

    SVE Mongoose clutch review!

    Glad you like the clutch! I put one in my 95 a couple of months ago & had a very small amount of chatter when I had the engagement set at the top of the pedal. I now have engagement set on the top side of mid-pedal travel & couldn't be happier. Still powershifts well too!
  9. LRSjmac

    speedometer gear?

    The only way to get your speedo dead on is to swap the drive gear & driven gear using our kit in the link you posted above. If you simply swap out the driven gear to a 23 tooth unit, your speedo will be 10mph off if you are still running a stock height tire.
  10. LRSjmac

    how do I remove the pcv valve?

    Cool, glad you got it figured out!
  11. LRSjmac

    how do I remove the pcv valve?

    Simply twist it counter-clockwise to remove. You can use a small crescent wrench on the square part of the PCV valve to help ease the removal.
  12. LRSjmac

    Tank Sending Unit Question

    If a float is $50, then the aftermarket Fuel Tank Sending Unit is a steal! If you have to drop your tank, might as well replace the whole thing. If your luck is like mine, youd replace just the float & then the sender would crap out a few days later! Mustang 87-93 Fuel Level Sending Unit...
  13. LRSjmac

    Summit racing/late model restoration list

    Sorry to hear you had an issue, but glad that it was resolved to your liking!
  14. LRSjmac

    Summit racing/late model restoration list

    Ditto.
  15. LRSjmac

    Need advice of 86 GT Front Bumper Cover

    Unfortunately shipping is expensive. If you do happen to find a better deal (total cost of part & shipping) advertised by a reputable company (ie- no ebay), we'll match it. Plus you'll still get the best service int he industry! :D
  16. LRSjmac

    Summit racing/late model restoration list

    Well, Eibach is doing their 10% rebate again this year. http://eibach.com/cgi-bin/start.exe/eibach/index.html?entry=y&thid=135 On the Injectors, if you're running a wet kit the injector upgrade is not needed. If you are leaning out it is due to too small of a fuel jet, too small of a fuel...
  17. LRSjmac

    Back in the Saddle again

    Well, we have 2 headliner options for you. If your original headliner board is still good, you can simply scrape it & re-cover it with new Cloth Headliner Material. If the board is bad, then we also have new ABS Plastic Headliner Boards covered in the appropriate color cloth material. No...
  18. LRSjmac

    O-rings on fuel line

    monte87 is right, the PE1149 with get you the Fuel Line O-rings you need for the fuel rail connections. Mustang - 86-95 Fuel Line O-Ring Kit at LRS - Same Day Shipping!
  19. LRSjmac

    Inner fender splash shield?

    Glad to hear it! We definately appreciate the business, & if you ever have any questions, please don't hesitate to ask.
  20. LRSjmac

    Inner fender splash shield?

    Adams91LX - Unfortunately used is your option. Ford discontinued both the 79-90 as well as the 91-93 inner fender splash shields a few years ago & so far they have not been reproduced in the aftermarket. The same splash shield fits 79-90, so you should be able to find a set relatively easy...
View older results
Top Bottom
Back
Forums
Menu