Search results

  1. HoofnIt

    overheating

    My car actually runs cooler with the AC on because this will automatically kick on the high-speed fan regardless of coolant temp.
  2. HoofnIt

    Radiator for '94 with AODE

    Where in the desert are you, Phoenix?
  3. HoofnIt

    air tube on the h-pipe

    Have you had any trouble with the heater hose melting?
  4. HoofnIt

    air tube on the h-pipe

    I had the same prob. The clamp was on so tight it literally bent the tubing and it would not come loose. I ended up using a dremmel tool to get it apart.
  5. HoofnIt

    bassani x install

    German torque 'Guttentight!" Snug them up, and then turn a little more.
  6. HoofnIt

    Which Bilsteins should I get?

    I called Maximum Motorsports with this same question. I'm running the same springs as you and they recommended the HD. Just out of curiosity, where can you get them for $465?
  7. HoofnIt

    Radiator for '94 with AODE

    I have a used (1 yr old) Fluidyne for an auto I need to get rid of. You can PM for details.
  8. HoofnIt

    where's the best place for replacement cobra headlamps

    I bought a set a few years ago from Late Model Restoration Supply and they are holding up pretty good. My sole complaint is that the threaded adjuster studs have surface rust which would not have happened with OE. If I were to do it again, I would have bought OE.
  9. HoofnIt

    Fluidyne ?

    Can anyone tell me what pound radiator cap I need for my fluidyne? I've looked on their website and also in the paperwork that came with it but have yet to find it. THX
  10. HoofnIt

    Takin the tranny out this weekend, anyone got any tips?

    It's a good idea to soak those driveshaft bolts the night before, heck soak down the nuts on the exhaust as well. I wouldn't use WD40 though, go to AutoZone and pick up some 'PB Blaster' this stuff works awesome.
  11. HoofnIt

    Project White Balls..... FR500's

    That looks real nice! How's the ride?
  12. HoofnIt

    Takin the tranny out this weekend, anyone got any tips?

    It will make your life easier if you competely remove the shifter as opposed to just the shifter handle.
  13. HoofnIt

    Got my Cobra Intake

    There is no need to port/polish it as that intake will more than outflow your stock heads. If you're definitely going to upgrade the heads than some port work might pay off. I had the same intake and am using a 65mm tb but I regret not going with a 70mm.
  14. HoofnIt

    anyone using a spec stage one? come in here?

    He's right, the break in is 500 easy miles! This was especially difficult for me because I did my HCI the same time as my clutch. I wanted to get into so bad but had to wait.
  15. HoofnIt

    Cheapest Route to 300rwhp

    There is no such thing as a 'CHEAP' route to 300 rwhp. Unless of course you consider at $4-5 grand as cheap! I would say the least expensive option is to purchase a used supercharger.
  16. HoofnIt

    water in air induction?

    If you find yourself driving in wet conditions you can pick up a Fox body rubber distributer cover. This wraps over and around the top of the dizzy to keep the elements out. Our years came with that molded plastic cover that is a real pain to remove/install.
  17. HoofnIt

    First Thread, My Introduction

    You found a great resouce for our bastard-yeared stangs. I wouldn't have been able to build mine without this site. PS-you will be banned soon if you don't post pics! he he he
  18. HoofnIt

    I started breakin down the stock engine for my H/C/I upgrade...a few questions....

    I had to remove the belt tensioner pulley in order to access the bracket bolt. It will come off pretty easy; no special tool.
  19. HoofnIt

    Idler Pulley....Problem with TX Bolt!

    This tip may be a little late but I've had good luck using anti-seize whenever trying to start a stubborn bolt.
  20. HoofnIt

    I started breakin down the stock engine for my H/C/I upgrade...a few questions....

    The oil in the lower intake could be a result of poor crankcase ventilation or perhaps from blowby. It's a good idea to change the pcv valve, screen and it's rubber grommet prior to installing the new upper intake. I removed my alternator and it's bracket-just set it to the side. Take out the...
Top Bottom
Back
Forums
Menu