Search results

  1. G

    Parts needed for brake conversion.

    brake conversion Hi, I'm not as internet savvy as I like to think But I keep trying :D . I tried to PM you with some info on the conversion you're taking about, if you didnt get it please let me know frank
  2. G

    header to x-pipe bolts

    wd-40 is a good idea but jprobably not enough if the bolts are that rusted. If you have access to some king of torch try heating whats left and turning it out with vise grips or good pliers after getting it good and hot. Try heating the unbroken ones before turning them to see if they will come...
  3. G

    T5 shifting problem

    Hi, assumming that your clutch fork is moving the proper distance when the pedal is depressed as you said, it sounds more like your clutch disc is rusted to your flywheel and not disengaging the trans from the motor. You stated that you can only shift if the engine is shut off, if you put the...
  4. G

    Speedo gear missing...now what???

    the housing where the speedo gear rides is separate from the main parts of the t-5, the only things back there are 5th gear drive and driven gears and the speedo. If you dont want to pull the trans out try using a small flexible extension magnet to fish out the metal clip through the hole for...
  5. G

    Blown tranny; syncro ?

    synchros Synchros are cheap enough just put new ones in. You can get a whole rebuild kit with all new bearings shims and updated synchros for $165 from for one example Medatronics in Fla. Frank
  6. G

    Anyone with Bassani Equal Length Headers

    Bassani exhaust I have them on a slightly? modified 87 with 3" basani h-pipe and exhaust all the back and it sounds great, as for as hp improvement I cant tell you all the mods were done at the same time so its impossible to judge. I do have to be carefull going into and out of driveways due to...
  7. G

    Help, no fuel to plugs

    sounds more like the fuel pressure is not coming up like the pumps not building pressure or the regulator is just passsing all the fuel clear through back to the tank. Frank
  8. G

    broken header bolt in the head!!!

    If there is still some of the stud sticking out tool manufacturers make a set of sockets that have a left hand knurl inside of them that will bite onto the stud as you attempt to remove them. I bought mine from a drivearound tool dealer but I believe you can find something similar in Sears or a...
  9. G

    Cost to rebuild a T5?

    t-5 rebuild Hanlon has a very good website and so does medatronics a lot of info and both also sell parts and t-5 specific manuals. My rebuild (all the teeth torn off of 3rd gear countershaft) cost me $150 for the rebuild kit which came with all the small parts including all the adjusting shims...
Top Bottom
Back
Forums
Menu