Search results

  1. USMstang

    Where to order Motorcraft PCV?

    I got the one that was one piece with some electrical connections for about $25 from my local dealer. Once I finally got the original one out, it was a snap to install. They did not have it in stock however but they got it the next day.
  2. USMstang

    How to tell if I did the MIL Elim right.

    What fitment issues are you having? There should be no loose bolts nor should anything move around or self adjust??? Please elaborate.
  3. USMstang

    Diablo or get 4:10 installed

    I've got the predator and wish I had the gears! Hell, I wish I would have done the gears right after the shifter.
  4. USMstang

    Ethanol blended fuel effects?

    they can also make it from sugar cane, sugar beets, switchgrass, garbage and the next big accomplishment will be the total utilization of the corn plant (and others too). One of the by-products of ethanol production from corn is feed. Only part of the kernel is used for fermentation, the other...
  5. USMstang

    Ethanol blended fuel effects?

    It won't be an overnight issue. If you are old enough to remember leaded gas, it was phased out gradually. The main reason for adding 10% ethanol is not all about America or corn or not even the fact that it burns so much cleaner, it's really more about "oxygenates". MTBE has been outlawed in...
  6. USMstang

    Ethanol blended fuel effects?

    I sure wish I had the option of getting 10% or even 20% ethanol down here! All cars produced in the US now will run fine on up to a 20% blend. This is proven. There is lots of GOOD info on the net in reference to ethanol. The bad info is from your friends at the major oil companies and our...
  7. USMstang

    How to tell if I did the MIL Elim right.

    Scott, I think I would call the guy in Michigan that made the elims and ask him if there is a simple test that you can do (maybe ohm them out or something with a multimeter) that would tell you if one of them got messed up in shipping. You're gonna have to get back under there anyway. JS
  8. USMstang

    How to tell if I did the MIL Elim right.

    I think I might send those elims back and ask for some new ones.
  9. USMstang

    Very close to buying a 6psi non-ic KB

    I'm thinking those guys need to add their educational credentials to their sigs!
  10. USMstang

    How to tell if I did the MIL Elim right.

    Nevermind, I just saw your previous thread in reference to the midpipe install from a couple of weeks back. Your new MIL elims should be just fine; I got mine several months ahead of my Predator and they are still working fine. Good luck with those other codes...
  11. USMstang

    How to tell if I did the MIL Elim right.

    The beer always helps...it just screws up the ability to do the test drive! Was the maker of the MIL elims in Michigan for like $14 mailed in a plain wrapper?
  12. USMstang

    How to tell if I did the MIL Elim right.

    Where did you get the MIL elims?
  13. USMstang

    How to tell if I did the MIL Elim right.

    Dude, take a deep breath, relax and get back under there and do it right. It's not a tough job but one you might want a helper for the midpipe. As for the solder job,(get some heatshrink from Radio Shack if you have not already done so) check all your connections. If you didn't use the...
  14. USMstang

    How to tell if I did the MIL Elim right.

    did you heatshrink the soldered connections? If not, they will eventually corrode.
  15. USMstang

    Transmission ?

    See this thread... http://forums.stangnet.com/showthread.php?t=608984&highlight=transmission+fluid+change
  16. USMstang

    squeak from rear

    My dad's had some strange squeaks when he drove it home the first time. His were from the front passenger side. I walked around the car and leaned on it and it did it again. So I start gently pounding with the bottom of my fist all around the fender until it did it again. Turns out that the...
  17. USMstang

    Time to replace PCV?

    Mine was about $25 and I had to eat a can of spinach to get that sucker off. Look at the new one real good to see what you're dealing with and then get a big breath and picture it coming off. It will.
  18. USMstang

    Need a quick tranny overview

    sounds like the T5 is the way to go for this application. that took less than one day to settle. Thank you gentlemen for the good info!
  19. USMstang

    Methanol Injection?

    That was a pretty liberal use of the word "only". If you are looking for big horsepower gains, this is not for you on a N/A car. If you are looking for other benefits such as being able to run advanced timing and not paying 20 cents a gallon more for gas, then you do the math and it may be...
  20. USMstang

    Need a quick tranny overview

    More good info. Thanks. Anyone esle care to contribute?
Top Bottom
Back
Forums
Menu