Search results

  1. O

    275 35 17 on a 10.5 wheel?

    Is anyone running a 275 on a 10.5 wheel?
  2. O

    Finally found a car 03 (new to me)

    Hi I I have been car shopping finally found one that was in my budget and looks Can you guys tell if the Owner was telling the truth.or Does have engine engine that's got more power than the GT.? I'm a older push rod guy./
  3. O

    Creaking(like a old bed/door) in front end

    my ball joints do that. I sick a spray straw from w-40 threw the rubber boot and that cures it
  4. O

    Changing transmission fluid in 94 V-6

    Is there a drain plug on the converter in a 94 3.8 ? If not can I unhook a transmission line start it up and more than just removing the pan?
  5. O

    For Sale SN95 Kenne Bell 1.5L Supercharger

    Do you still have your Kenne Bell? Lee 304-704-7514
  6. O

    94 Mustang alarm question

    I have a 94 mustang that when I installed fog lights all the wiring was already there. I installed a factory switch,relay and the lights and they worked. With my key less entry key fob if i press the lock button I can get the horn to bark like setting the alarm. Thing is I don't have a working...
  7. O

    320 miles on a full tank

    I just bought a 1994 cobra with 20,000 mi to use as a every day driver I had to drive hundreds of mile to get it home driving 70-80ish with the air on I got 25.3 mpg dosen't a 94 have a 14 gal tank? I should be able to go 354.2 miles on one tank
  8. O

    Parting out Black 94 Cobra

    I'm interested in the rear deck lid and spoiler I-m me Or give me a call 304-478-4430 Lee
  9. O

    Questions About The 1994 1995 Cobra

    Hi, I have been looking at the 94 95 Cobras and some have a pony in the grill and some have the cobra, Also some have the SVT emblem on the back and some do not. Pony in the grill,, I just got done talking to a guy that has a 94 that he got new and it has the pony. Talked to another guy...
  10. O

    Rear end swap

    Why not use the housing you have now? Just pull the axels and strip everything off the ends of the axle tubes and install the axles and all the stuff from the 95 rear end onto your housing. Thats what I did ,, But you will still be left with the task of hooking up an emergency brake and brake lines
  11. O

    radiator to block clearance question. 94 95 compared to a fox

    Yea I see what you are talking about,, Thanks for the pictures When I put this blower set up on the fox body I used a spacer between the stock pulley and the blower pulley. Then I turned the top pulley around and installed it backwards. That's how I got in front of the serpentine belt And...
  12. O

    radiator to block clearance question. 94 95 compared to a fox

    Thanks that's the kind of information I'm looking for. 14" from the center of the distributor to the radiator" Is that to back side of the radiator or the fan side? 1" could mean a lot And another question where does the thermostat housing set in a SN-95? I would like to reuse the intake...
  13. O

    radiator to block clearance question. 94 95 compared to a fox

    --No chance of that fitting-- Yea I have heard that before when I was getting ready to install it on my fox I wanted to keep the power steering and air conditioning. I called BDS Dyers and most of the big blower places and they told me "It cant be done." And as far being an antique...
  14. O

    radiator to block clearance question. 94 95 compared to a fox

    I'm not using a spacer behind the pulley with the set up I'm using. The pulley and spacer go on the front of the factory pulley. The bolts that hold the blower pulley on are long they are also holding on the factory pulley and a small spacer behind the blower pulley
  15. O

    radiator to block clearance question. 94 95 compared to a fox

    The picture is of the blower on a fox. That's why I was wondering about the clearance on the SN-95 cars Maybe go with a pusher fan?
  16. O

    radiator to block clearance question. 94 95 compared to a fox

  17. O

    radiator to block clearance question. 94 95 compared to a fox

    I'm running a 6-71 roots style. The blower snout sticks out past the accessories and stock belt. The stock SN accessories should be able to stay right where they are. Nothing bolts to the front of the engine except the pulley that bolts to the harmonic balancer on the inside of the stock...
  18. O

    radiator to block clearance question. 94 95 compared to a fox

    Ok,, If the radiator is closer then that's going to be a problem. How much room is there in front of the radiator and condenser core? And can a factory fan like off a Lincoln be made into a pusher fan?
  19. O

    radiator to block clearance question. 94 95 compared to a fox

    I'm running a roots type blower it has it's own intake and the belt for the blower is independent it runs in front of the factory accessories and belt. I can just leave all the factory stuff right where it's at. That's what I did when I installed it on the fox body.
  20. O

    radiator to block clearance question. 94 95 compared to a fox

    I thought the SN 5.0 engines and heads were basically the same block as the old ones.
Top Bottom
Back
Forums
Menu